Dynamite Friction 4514-80007 Disc Brake Kit - Front and Rear
Brake Kit for 2004-2008 Mazda RX-8
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and Hardware Kit, part number 4514-80007, is a front and rear disc brake kit for the 2004-2008 Mazda RX-8 with normal suspension. It combines coated rotors, semi-metallic pads, and brake hardware in one service package for a complete brake refresh.
Key Features
- Compatible with 2004-2008 Mazda RX-8, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced semi-metallic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time and more immediate stopping response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Hardware kit included for a complete brake service
Product Details
Part number 4514-80007 is built for Mazda RX-8 brake service applications that require front and rear coverage. The DFC GEOSPEC rotors are machined to OE-style tolerances from G3000/G11H18 cast iron and shipped dry, so they are ready for installation without cleaning off oil-based coatings. The 5000 Advanced pads are formulated for stable friction performance and are assembled with premium shims to help reduce brake noise and vibration. This kit is a practical choice for drivers searching for a 2004-2008 Mazda RX-8 front and rear brake kit with coated rotors and semi-metallic pads.
DFC’s brake pad and rotor programs are developed around axle-specific friction requirements, and the rotor finish is designed to support consistent pad contact during bed-in. If you are replacing worn brake components on a Mazda RX-8, this kit provides the core parts needed for a full brake service in one package. This part number 4514-80007 is listed for the RX-8 with normal suspension only.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven braking feel caused by rotor wear or surface corrosion
- Longer stopping distances from reduced pad friction
- Vibration or pulsation during braking from rotor condition
- Premature or uneven pad wear from aged brake hardware
Installation Notes
Compatible With 2004-2008 Mazda RX-8, front and rear, normal suspension. Verify rotor size, caliper hardware condition, and suspension configuration before installation. The dry-coated rotors are ready to install, and the non-directional finish helps support a more even bed-in process after service. For best results, follow proper brake cleaning, torque, and bedding procedures during installation of part number 4514-80007.
Quality Assurance
DFC GEOSPEC rotors are 100% inspected for critical dimensions and balance, and each rotor includes a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and scorched to promote stable friction performance from the first stop.
Brake Kit for 2004-2008 Mazda RX-8
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and Hardware Kit, part number 4514-80007, is a front and rear disc brake kit for the 2004-2008 Mazda RX-8 with normal suspension. It combines coated rotors, semi-metallic pads, and brake hardware in one service package for a complete brake refresh.
Key Features
- Compatible with 2004-2008 Mazda RX-8, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced semi-metallic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time and more immediate stopping response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Hardware kit included for a complete brake service
Product Details
Part number 4514-80007 is built for Mazda RX-8 brake service applications that require front and rear coverage. The DFC GEOSPEC rotors are machined to OE-style tolerances from G3000/G11H18 cast iron and shipped dry, so they are ready for installation without cleaning off oil-based coatings. The 5000 Advanced pads are formulated for stable friction performance and are assembled with premium shims to help reduce brake noise and vibration. This kit is a practical choice for drivers searching for a 2004-2008 Mazda RX-8 front and rear brake kit with coated rotors and semi-metallic pads.
DFC’s brake pad and rotor programs are developed around axle-specific friction requirements, and the rotor finish is designed to support consistent pad contact during bed-in. If you are replacing worn brake components on a Mazda RX-8, this kit provides the core parts needed for a full brake service in one package. This part number 4514-80007 is listed for the RX-8 with normal suspension only.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven braking feel caused by rotor wear or surface corrosion
- Longer stopping distances from reduced pad friction
- Vibration or pulsation during braking from rotor condition
- Premature or uneven pad wear from aged brake hardware
Installation Notes
Compatible With 2004-2008 Mazda RX-8, front and rear, normal suspension. Verify rotor size, caliper hardware condition, and suspension configuration before installation. The dry-coated rotors are ready to install, and the non-directional finish helps support a more even bed-in process after service. For best results, follow proper brake cleaning, torque, and bedding procedures during installation of part number 4514-80007.
Quality Assurance
DFC GEOSPEC rotors are 100% inspected for critical dimensions and balance, and each rotor includes a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and scorched to promote stable friction performance from the first stop.
Original: $322.44
-65%$322.44
$112.85Description
Brake Kit for 2004-2008 Mazda RX-8
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and Hardware Kit, part number 4514-80007, is a front and rear disc brake kit for the 2004-2008 Mazda RX-8 with normal suspension. It combines coated rotors, semi-metallic pads, and brake hardware in one service package for a complete brake refresh.
Key Features
- Compatible with 2004-2008 Mazda RX-8, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced semi-metallic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time and more immediate stopping response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Hardware kit included for a complete brake service
Product Details
Part number 4514-80007 is built for Mazda RX-8 brake service applications that require front and rear coverage. The DFC GEOSPEC rotors are machined to OE-style tolerances from G3000/G11H18 cast iron and shipped dry, so they are ready for installation without cleaning off oil-based coatings. The 5000 Advanced pads are formulated for stable friction performance and are assembled with premium shims to help reduce brake noise and vibration. This kit is a practical choice for drivers searching for a 2004-2008 Mazda RX-8 front and rear brake kit with coated rotors and semi-metallic pads.
DFC’s brake pad and rotor programs are developed around axle-specific friction requirements, and the rotor finish is designed to support consistent pad contact during bed-in. If you are replacing worn brake components on a Mazda RX-8, this kit provides the core parts needed for a full brake service in one package. This part number 4514-80007 is listed for the RX-8 with normal suspension only.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven braking feel caused by rotor wear or surface corrosion
- Longer stopping distances from reduced pad friction
- Vibration or pulsation during braking from rotor condition
- Premature or uneven pad wear from aged brake hardware
Installation Notes
Compatible With 2004-2008 Mazda RX-8, front and rear, normal suspension. Verify rotor size, caliper hardware condition, and suspension configuration before installation. The dry-coated rotors are ready to install, and the non-directional finish helps support a more even bed-in process after service. For best results, follow proper brake cleaning, torque, and bedding procedures during installation of part number 4514-80007.
Quality Assurance
DFC GEOSPEC rotors are 100% inspected for critical dimensions and balance, and each rotor includes a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and scorched to promote stable friction performance from the first stop.
