Dynamite Friction 4514-79000 Disc Brake Kit - Front and Rear
DFC Geospec Brake Kit Overview
The Dynamite Friction DFC Geospec Rotors with 5000 Advanced Brake Pads kit, part number 4514-79000, combines coated rotors, advanced friction pads, and brake hardware in one service package. It is built for drivers who want OE-style brake service parts with consistent stopping performance, reduced brake noise, and corrosion-resistant rotor surfaces.
Key Features
- DFC 5000 Advanced Brake Pads with post-cured friction material for stable performance
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray finish that resists rust better than conventional coatings
- Dry-processed rotors that are ready to install without oil removal
- G3000/G11H18 cast iron rotor construction machined to OE specifications
- Non-directional rotor finish for smoother pad bed-in and quieter braking
- Disc brake hardware kit engineered with PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC Geospec Rotors with 5000 Advanced Brake Pads includes Hardware, part number 4514-79000, is a complete disc brake kit for service work where rotor condition, pad material, and hardware wear all need to be addressed together. The DFC 5000 Advanced Brake Pads are formulated for consistent friction output and use shims to help control brake noise and pedal harshness. The GeoSpec rotors are coated for corrosion resistance, machined to tight tolerances, and finished to support even pad contact during bed-in. This kit is a practical choice for brake service on vehicles such as Honda Civic and Honda Accord applications when the listed fitment matches the vehicle being serviced. Part number 4514-79000 is designed to streamline brake maintenance with matched components from one product line.
What It Helps Address
- Brake noise caused by worn pads or fatigued hardware
- Uneven braking feel from rotor wear or inconsistent pad contact
- Rust buildup on exposed rotor surfaces
- Longer stopping distances related to worn friction material
- Caliper movement issues linked to aged disc brake hardware
Installation Notes
Inspect calipers, slides, and hub surfaces before installation. Clean the hub face thoroughly so the coated rotor seats flat, and follow standard brake bedding procedures after installation. Because the rotors are shipped dry and ready to install, no oil removal step is required. Verify vehicle-specific fitment before ordering; this kit is not listed with expanded fitment data in the supplied catalog record.
Quality Assurance
DFC states that the pads are post-cured and scorched for stable friction performance, while the rotors are 100% inspected for critical dimensions and balance. The rotors carry a 12-month warranty against defects in material and workmanship. Part number 4514-79000 reflects a matched brake service kit built around OE-style specifications and inspection standards.
DFC Geospec Brake Kit Overview
The Dynamite Friction DFC Geospec Rotors with 5000 Advanced Brake Pads kit, part number 4514-79000, combines coated rotors, advanced friction pads, and brake hardware in one service package. It is built for drivers who want OE-style brake service parts with consistent stopping performance, reduced brake noise, and corrosion-resistant rotor surfaces.
Key Features
- DFC 5000 Advanced Brake Pads with post-cured friction material for stable performance
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray finish that resists rust better than conventional coatings
- Dry-processed rotors that are ready to install without oil removal
- G3000/G11H18 cast iron rotor construction machined to OE specifications
- Non-directional rotor finish for smoother pad bed-in and quieter braking
- Disc brake hardware kit engineered with PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC Geospec Rotors with 5000 Advanced Brake Pads includes Hardware, part number 4514-79000, is a complete disc brake kit for service work where rotor condition, pad material, and hardware wear all need to be addressed together. The DFC 5000 Advanced Brake Pads are formulated for consistent friction output and use shims to help control brake noise and pedal harshness. The GeoSpec rotors are coated for corrosion resistance, machined to tight tolerances, and finished to support even pad contact during bed-in. This kit is a practical choice for brake service on vehicles such as Honda Civic and Honda Accord applications when the listed fitment matches the vehicle being serviced. Part number 4514-79000 is designed to streamline brake maintenance with matched components from one product line.
What It Helps Address
- Brake noise caused by worn pads or fatigued hardware
- Uneven braking feel from rotor wear or inconsistent pad contact
- Rust buildup on exposed rotor surfaces
- Longer stopping distances related to worn friction material
- Caliper movement issues linked to aged disc brake hardware
Installation Notes
Inspect calipers, slides, and hub surfaces before installation. Clean the hub face thoroughly so the coated rotor seats flat, and follow standard brake bedding procedures after installation. Because the rotors are shipped dry and ready to install, no oil removal step is required. Verify vehicle-specific fitment before ordering; this kit is not listed with expanded fitment data in the supplied catalog record.
Quality Assurance
DFC states that the pads are post-cured and scorched for stable friction performance, while the rotors are 100% inspected for critical dimensions and balance. The rotors carry a 12-month warranty against defects in material and workmanship. Part number 4514-79000 reflects a matched brake service kit built around OE-style specifications and inspection standards.
Original: $519.75
-65%$519.75
$181.91Description
DFC Geospec Brake Kit Overview
The Dynamite Friction DFC Geospec Rotors with 5000 Advanced Brake Pads kit, part number 4514-79000, combines coated rotors, advanced friction pads, and brake hardware in one service package. It is built for drivers who want OE-style brake service parts with consistent stopping performance, reduced brake noise, and corrosion-resistant rotor surfaces.
Key Features
- DFC 5000 Advanced Brake Pads with post-cured friction material for stable performance
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray finish that resists rust better than conventional coatings
- Dry-processed rotors that are ready to install without oil removal
- G3000/G11H18 cast iron rotor construction machined to OE specifications
- Non-directional rotor finish for smoother pad bed-in and quieter braking
- Disc brake hardware kit engineered with PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC Geospec Rotors with 5000 Advanced Brake Pads includes Hardware, part number 4514-79000, is a complete disc brake kit for service work where rotor condition, pad material, and hardware wear all need to be addressed together. The DFC 5000 Advanced Brake Pads are formulated for consistent friction output and use shims to help control brake noise and pedal harshness. The GeoSpec rotors are coated for corrosion resistance, machined to tight tolerances, and finished to support even pad contact during bed-in. This kit is a practical choice for brake service on vehicles such as Honda Civic and Honda Accord applications when the listed fitment matches the vehicle being serviced. Part number 4514-79000 is designed to streamline brake maintenance with matched components from one product line.
What It Helps Address
- Brake noise caused by worn pads or fatigued hardware
- Uneven braking feel from rotor wear or inconsistent pad contact
- Rust buildup on exposed rotor surfaces
- Longer stopping distances related to worn friction material
- Caliper movement issues linked to aged disc brake hardware
Installation Notes
Inspect calipers, slides, and hub surfaces before installation. Clean the hub face thoroughly so the coated rotor seats flat, and follow standard brake bedding procedures after installation. Because the rotors are shipped dry and ready to install, no oil removal step is required. Verify vehicle-specific fitment before ordering; this kit is not listed with expanded fitment data in the supplied catalog record.
Quality Assurance
DFC states that the pads are post-cured and scorched for stable friction performance, while the rotors are 100% inspected for critical dimensions and balance. The rotors carry a 12-month warranty against defects in material and workmanship. Part number 4514-79000 reflects a matched brake service kit built around OE-style specifications and inspection standards.
