Dynamite Friction 4514-76103 Disc Brake Pad and Rotor / Drum Brake Shoe and Drum Kit - Front and Rear
Brake Kit for 1986 Toyota 4Runner and Pickup
Dynamite Friction DFC Geospec Rotors with 5000 Advanced Brake Pads includes DFC Drums, Shoes and Hardware is a complete brake service kit for select 1986 Toyota applications. It combines coated rotors, advanced friction pads, and matching drum brake components for front and rear service on the Toyota 4Runner and Toyota Pickup.
Key Features
- Fits 1986 Toyota 4Runner, front and rear
- Fits 1986 Toyota Pickup, front and rear
- DFC 5000 Advanced Brake Pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray corrosion-resistant finish
- Dry-packaged rotors ready for installation
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Drums, shoes, and hardware included in the kit description
Product Line Details
The DFC Geospec rotor line is built around coated, OE-style replacement rotors that are machined to tight tolerances and finished for consistent braking performance. The 5000 Advanced Brake Pads line focuses on stable friction behavior, reduced break-in time, and improved NVH control through premium shim construction. Together, these components are packaged for a full brake service on the 1986 Toyota 4Runner and 1986 Toyota Pickup.
Detailed Description
Part number 4514-76103 is a front and rear brake service kit for 1986 Toyota 4Runner and 1986 Toyota Pickup models. The rotor set uses G3000/G11H18 cast iron construction and a coated surface that helps resist rust while eliminating the need to clean oil from the rotor before installation. The pads are post-cured and scorched for consistent friction response, while the rotor finish supports quieter operation and more even contact during bed-in. This kit is a practical choice for a Toyota 4Runner brake kit or Toyota Pickup brake kit when you need coordinated rotor and pad replacement with drum brake service components included in the package description.
Common Problems This Kit Can Address
- Brake noise during stops
- Uneven pad wear or inconsistent pedal feel
- Rust buildup on exposed rotor surfaces
- Longer-than-normal brake break-in after service
- Reduced braking performance from worn friction components
Installation Notes and Tips
Before installation, inspect calipers, wheel cylinders, brake lines, and mounting surfaces for wear or corrosion. Clean the hub face thoroughly so the new rotors seat flat, and follow the vehicle service manual for torque values and bedding procedures. Because this kit is listed for front and rear service on 1986 Toyota 4Runner and 1986 Toyota Pickup applications, confirm axle and drum brake configuration before ordering.
Quality Assurance
DFC GeoSpec rotors are 100% inspected for critical dimensions and balance, and each rotor is backed by a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and assembled with premium shims to support stable friction performance and consistent fitment quality. Part number 4514-76103 is built for direct service use on the listed Toyota applications.
Brake Kit for 1986 Toyota 4Runner and Pickup
Dynamite Friction DFC Geospec Rotors with 5000 Advanced Brake Pads includes DFC Drums, Shoes and Hardware is a complete brake service kit for select 1986 Toyota applications. It combines coated rotors, advanced friction pads, and matching drum brake components for front and rear service on the Toyota 4Runner and Toyota Pickup.
Key Features
- Fits 1986 Toyota 4Runner, front and rear
- Fits 1986 Toyota Pickup, front and rear
- DFC 5000 Advanced Brake Pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray corrosion-resistant finish
- Dry-packaged rotors ready for installation
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Drums, shoes, and hardware included in the kit description
Product Line Details
The DFC Geospec rotor line is built around coated, OE-style replacement rotors that are machined to tight tolerances and finished for consistent braking performance. The 5000 Advanced Brake Pads line focuses on stable friction behavior, reduced break-in time, and improved NVH control through premium shim construction. Together, these components are packaged for a full brake service on the 1986 Toyota 4Runner and 1986 Toyota Pickup.
Detailed Description
Part number 4514-76103 is a front and rear brake service kit for 1986 Toyota 4Runner and 1986 Toyota Pickup models. The rotor set uses G3000/G11H18 cast iron construction and a coated surface that helps resist rust while eliminating the need to clean oil from the rotor before installation. The pads are post-cured and scorched for consistent friction response, while the rotor finish supports quieter operation and more even contact during bed-in. This kit is a practical choice for a Toyota 4Runner brake kit or Toyota Pickup brake kit when you need coordinated rotor and pad replacement with drum brake service components included in the package description.
Common Problems This Kit Can Address
- Brake noise during stops
- Uneven pad wear or inconsistent pedal feel
- Rust buildup on exposed rotor surfaces
- Longer-than-normal brake break-in after service
- Reduced braking performance from worn friction components
Installation Notes and Tips
Before installation, inspect calipers, wheel cylinders, brake lines, and mounting surfaces for wear or corrosion. Clean the hub face thoroughly so the new rotors seat flat, and follow the vehicle service manual for torque values and bedding procedures. Because this kit is listed for front and rear service on 1986 Toyota 4Runner and 1986 Toyota Pickup applications, confirm axle and drum brake configuration before ordering.
Quality Assurance
DFC GeoSpec rotors are 100% inspected for critical dimensions and balance, and each rotor is backed by a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and assembled with premium shims to support stable friction performance and consistent fitment quality. Part number 4514-76103 is built for direct service use on the listed Toyota applications.
Original: $470.16
-65%$470.16
$164.56Description
Brake Kit for 1986 Toyota 4Runner and Pickup
Dynamite Friction DFC Geospec Rotors with 5000 Advanced Brake Pads includes DFC Drums, Shoes and Hardware is a complete brake service kit for select 1986 Toyota applications. It combines coated rotors, advanced friction pads, and matching drum brake components for front and rear service on the Toyota 4Runner and Toyota Pickup.
Key Features
- Fits 1986 Toyota 4Runner, front and rear
- Fits 1986 Toyota Pickup, front and rear
- DFC 5000 Advanced Brake Pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray corrosion-resistant finish
- Dry-packaged rotors ready for installation
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Drums, shoes, and hardware included in the kit description
Product Line Details
The DFC Geospec rotor line is built around coated, OE-style replacement rotors that are machined to tight tolerances and finished for consistent braking performance. The 5000 Advanced Brake Pads line focuses on stable friction behavior, reduced break-in time, and improved NVH control through premium shim construction. Together, these components are packaged for a full brake service on the 1986 Toyota 4Runner and 1986 Toyota Pickup.
Detailed Description
Part number 4514-76103 is a front and rear brake service kit for 1986 Toyota 4Runner and 1986 Toyota Pickup models. The rotor set uses G3000/G11H18 cast iron construction and a coated surface that helps resist rust while eliminating the need to clean oil from the rotor before installation. The pads are post-cured and scorched for consistent friction response, while the rotor finish supports quieter operation and more even contact during bed-in. This kit is a practical choice for a Toyota 4Runner brake kit or Toyota Pickup brake kit when you need coordinated rotor and pad replacement with drum brake service components included in the package description.
Common Problems This Kit Can Address
- Brake noise during stops
- Uneven pad wear or inconsistent pedal feel
- Rust buildup on exposed rotor surfaces
- Longer-than-normal brake break-in after service
- Reduced braking performance from worn friction components
Installation Notes and Tips
Before installation, inspect calipers, wheel cylinders, brake lines, and mounting surfaces for wear or corrosion. Clean the hub face thoroughly so the new rotors seat flat, and follow the vehicle service manual for torque values and bedding procedures. Because this kit is listed for front and rear service on 1986 Toyota 4Runner and 1986 Toyota Pickup applications, confirm axle and drum brake configuration before ordering.
Quality Assurance
DFC GeoSpec rotors are 100% inspected for critical dimensions and balance, and each rotor is backed by a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and assembled with premium shims to support stable friction performance and consistent fitment quality. Part number 4514-76103 is built for direct service use on the listed Toyota applications.
