Dynamite Friction 4514-76090 Disc Brake Pad and Rotor / Drum Brake Shoe and Drum Kit - Front and Rear
Brake Kit for Toyota Camry
Restore braking performance on select 2002-2004 Toyota Camry models with DFC Geospec Rotors with 5000 Advanced Brake Pads includes DFC Drums Shoes and Hardware, part number 4514-76090. This brake service kit is built for front and rear service on Camry applications with rear drum brakes, combining coated rotors, advanced pads, and matched drum brake components in one package.
Key Features
- Fits 2002-2004 Toyota Camry, front and rear
- Rear drum application noted for the Camry fitment
- DFC 5000 Advanced brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- Dry-processed, dry-shipped rotors ready for installation
- Non-directional rotor finish for more even pad bed-in and smoother stops
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4514-76090 for ordering and catalog lookup
Product Details
The DFC Geospec Rotors with 5000 Advanced Brake Pads includes DFC Drums Shoes and Hardware line is engineered as a complete brake service solution for the 2002-2004 Toyota Camry. The pads are formulated for stable friction performance, while the coated rotors are machined to tight tolerances and inspected for critical dimensions to support OE-style fit and function. The drum brake components and hardware are included to address the rear drum service side of the vehicle, helping you replace worn braking parts in one coordinated repair. Use part number 4514-76090 when searching for this Toyota Camry brake kit.
Common Reasons to Replace
- Brake noise, vibration, or harshness during stops
- Rust buildup on rotor surfaces
- Longer stopping distances or reduced pedal confidence
- Uneven pad wear or poor pad bed-in
- Rear drum wear, fatigue, or corrosion on Camry brake service parts
Installation Notes
Verify the vehicle is a 2002-2004 Toyota Camry with rear drum brakes before ordering. Clean mounting surfaces, inspect caliper and drum brake contact points, and follow the manufacturer’s bed-in procedure after installation. The rotors are shipped dry and ready to install, which helps reduce prep time during the brake job. Confirm all brake components are torqued to specification and test the system before returning the vehicle to service.
Quality Assurance
DFC states that the pads are post-cured and scorched for consistent friction behavior, and the rotors are manufactured to OE specifications using G3000/G11H18 cast iron, then inspected for balance and critical dimensions. The rotors include a 12-month warranty against defects in material and workmanship. Part number 4514-76090 is built for dependable service on select Toyota Camry brake repairs.
Brake Kit for Toyota Camry
Restore braking performance on select 2002-2004 Toyota Camry models with DFC Geospec Rotors with 5000 Advanced Brake Pads includes DFC Drums Shoes and Hardware, part number 4514-76090. This brake service kit is built for front and rear service on Camry applications with rear drum brakes, combining coated rotors, advanced pads, and matched drum brake components in one package.
Key Features
- Fits 2002-2004 Toyota Camry, front and rear
- Rear drum application noted for the Camry fitment
- DFC 5000 Advanced brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- Dry-processed, dry-shipped rotors ready for installation
- Non-directional rotor finish for more even pad bed-in and smoother stops
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4514-76090 for ordering and catalog lookup
Product Details
The DFC Geospec Rotors with 5000 Advanced Brake Pads includes DFC Drums Shoes and Hardware line is engineered as a complete brake service solution for the 2002-2004 Toyota Camry. The pads are formulated for stable friction performance, while the coated rotors are machined to tight tolerances and inspected for critical dimensions to support OE-style fit and function. The drum brake components and hardware are included to address the rear drum service side of the vehicle, helping you replace worn braking parts in one coordinated repair. Use part number 4514-76090 when searching for this Toyota Camry brake kit.
Common Reasons to Replace
- Brake noise, vibration, or harshness during stops
- Rust buildup on rotor surfaces
- Longer stopping distances or reduced pedal confidence
- Uneven pad wear or poor pad bed-in
- Rear drum wear, fatigue, or corrosion on Camry brake service parts
Installation Notes
Verify the vehicle is a 2002-2004 Toyota Camry with rear drum brakes before ordering. Clean mounting surfaces, inspect caliper and drum brake contact points, and follow the manufacturer’s bed-in procedure after installation. The rotors are shipped dry and ready to install, which helps reduce prep time during the brake job. Confirm all brake components are torqued to specification and test the system before returning the vehicle to service.
Quality Assurance
DFC states that the pads are post-cured and scorched for consistent friction behavior, and the rotors are manufactured to OE specifications using G3000/G11H18 cast iron, then inspected for balance and critical dimensions. The rotors include a 12-month warranty against defects in material and workmanship. Part number 4514-76090 is built for dependable service on select Toyota Camry brake repairs.
Original: $353.13
-65%$353.13
$123.60Description
Brake Kit for Toyota Camry
Restore braking performance on select 2002-2004 Toyota Camry models with DFC Geospec Rotors with 5000 Advanced Brake Pads includes DFC Drums Shoes and Hardware, part number 4514-76090. This brake service kit is built for front and rear service on Camry applications with rear drum brakes, combining coated rotors, advanced pads, and matched drum brake components in one package.
Key Features
- Fits 2002-2004 Toyota Camry, front and rear
- Rear drum application noted for the Camry fitment
- DFC 5000 Advanced brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- Dry-processed, dry-shipped rotors ready for installation
- Non-directional rotor finish for more even pad bed-in and smoother stops
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4514-76090 for ordering and catalog lookup
Product Details
The DFC Geospec Rotors with 5000 Advanced Brake Pads includes DFC Drums Shoes and Hardware line is engineered as a complete brake service solution for the 2002-2004 Toyota Camry. The pads are formulated for stable friction performance, while the coated rotors are machined to tight tolerances and inspected for critical dimensions to support OE-style fit and function. The drum brake components and hardware are included to address the rear drum service side of the vehicle, helping you replace worn braking parts in one coordinated repair. Use part number 4514-76090 when searching for this Toyota Camry brake kit.
Common Reasons to Replace
- Brake noise, vibration, or harshness during stops
- Rust buildup on rotor surfaces
- Longer stopping distances or reduced pedal confidence
- Uneven pad wear or poor pad bed-in
- Rear drum wear, fatigue, or corrosion on Camry brake service parts
Installation Notes
Verify the vehicle is a 2002-2004 Toyota Camry with rear drum brakes before ordering. Clean mounting surfaces, inspect caliper and drum brake contact points, and follow the manufacturer’s bed-in procedure after installation. The rotors are shipped dry and ready to install, which helps reduce prep time during the brake job. Confirm all brake components are torqued to specification and test the system before returning the vehicle to service.
Quality Assurance
DFC states that the pads are post-cured and scorched for consistent friction behavior, and the rotors are manufactured to OE specifications using G3000/G11H18 cast iron, then inspected for balance and critical dimensions. The rotors include a 12-month warranty against defects in material and workmanship. Part number 4514-76090 is built for dependable service on select Toyota Camry brake repairs.
