Dynamite Friction 4514-76051 Disc Brake Kit - Front and Rear
Brake Kit for 2016-2020 Toyota Mirai
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for the 2016-2020 Toyota Mirai, front and rear. Part number 4514-76051 combines coated rotors, ceramic brake pads, and brake hardware in one service kit for a complete brake refresh.
Compatible With 2016-2020 Toyota Mirai brake service applications, this kit is designed for drivers looking for OE-style fitment, corrosion protection, and consistent pedal response. The DFC GEOSPEC rotor finish helps resist rust, while the 5000 Advanced pads are formulated for stable friction and reduced noise.
Key Features
- Fits 2016-2020 Toyota Mirai, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4514-76051 for easy identification
Product Details
DFC GEOSPEC rotors are machined to tight tolerances, finished with a non-directional surface for even pad bedding, and processed dry so they are ready to install without oil cleanup. The rotor casting is engineered to OEM-style G3000/G11H18 cast iron specifications for durability and stability. The 5000 Advanced pads are developed with friction formulations matched to axle-specific vehicle requirements and assembled with shims that help reduce brake noise and vibration. This part number 4514-76051 is a practical choice for Toyota Mirai brake replacement when you want a complete front and rear service kit.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Rust buildup on exposed rotor surfaces
- Reduced stopping consistency from aged friction material
- Longer service time caused by rotors that require cleaning before installation
Installation Notes
Verify rotor size, pad shape, and hardware match the vehicle before installation. Clean the hub mounting surface, inspect calipers and slides, and follow proper bedding procedures after installation to help the pads and rotors seat evenly. For 2016-2020 Toyota Mirai brake service, confirm front and rear placement before beginning work. Part number 4514-76051 should be matched to the exact application listed above.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical dimensions and balance, and every rotor includes a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and scorched for stable friction performance, while the hardware kit is built to OE-style form, fit, and function standards.
Brake Kit for 2016-2020 Toyota Mirai
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for the 2016-2020 Toyota Mirai, front and rear. Part number 4514-76051 combines coated rotors, ceramic brake pads, and brake hardware in one service kit for a complete brake refresh.
Compatible With 2016-2020 Toyota Mirai brake service applications, this kit is designed for drivers looking for OE-style fitment, corrosion protection, and consistent pedal response. The DFC GEOSPEC rotor finish helps resist rust, while the 5000 Advanced pads are formulated for stable friction and reduced noise.
Key Features
- Fits 2016-2020 Toyota Mirai, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4514-76051 for easy identification
Product Details
DFC GEOSPEC rotors are machined to tight tolerances, finished with a non-directional surface for even pad bedding, and processed dry so they are ready to install without oil cleanup. The rotor casting is engineered to OEM-style G3000/G11H18 cast iron specifications for durability and stability. The 5000 Advanced pads are developed with friction formulations matched to axle-specific vehicle requirements and assembled with shims that help reduce brake noise and vibration. This part number 4514-76051 is a practical choice for Toyota Mirai brake replacement when you want a complete front and rear service kit.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Rust buildup on exposed rotor surfaces
- Reduced stopping consistency from aged friction material
- Longer service time caused by rotors that require cleaning before installation
Installation Notes
Verify rotor size, pad shape, and hardware match the vehicle before installation. Clean the hub mounting surface, inspect calipers and slides, and follow proper bedding procedures after installation to help the pads and rotors seat evenly. For 2016-2020 Toyota Mirai brake service, confirm front and rear placement before beginning work. Part number 4514-76051 should be matched to the exact application listed above.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical dimensions and balance, and every rotor includes a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and scorched for stable friction performance, while the hardware kit is built to OE-style form, fit, and function standards.
Original: $314.92
-65%$314.92
$110.22Description
Brake Kit for 2016-2020 Toyota Mirai
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for the 2016-2020 Toyota Mirai, front and rear. Part number 4514-76051 combines coated rotors, ceramic brake pads, and brake hardware in one service kit for a complete brake refresh.
Compatible With 2016-2020 Toyota Mirai brake service applications, this kit is designed for drivers looking for OE-style fitment, corrosion protection, and consistent pedal response. The DFC GEOSPEC rotor finish helps resist rust, while the 5000 Advanced pads are formulated for stable friction and reduced noise.
Key Features
- Fits 2016-2020 Toyota Mirai, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4514-76051 for easy identification
Product Details
DFC GEOSPEC rotors are machined to tight tolerances, finished with a non-directional surface for even pad bedding, and processed dry so they are ready to install without oil cleanup. The rotor casting is engineered to OEM-style G3000/G11H18 cast iron specifications for durability and stability. The 5000 Advanced pads are developed with friction formulations matched to axle-specific vehicle requirements and assembled with shims that help reduce brake noise and vibration. This part number 4514-76051 is a practical choice for Toyota Mirai brake replacement when you want a complete front and rear service kit.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Rust buildup on exposed rotor surfaces
- Reduced stopping consistency from aged friction material
- Longer service time caused by rotors that require cleaning before installation
Installation Notes
Verify rotor size, pad shape, and hardware match the vehicle before installation. Clean the hub mounting surface, inspect calipers and slides, and follow proper bedding procedures after installation to help the pads and rotors seat evenly. For 2016-2020 Toyota Mirai brake service, confirm front and rear placement before beginning work. Part number 4514-76051 should be matched to the exact application listed above.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical dimensions and balance, and every rotor includes a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and scorched for stable friction performance, while the hardware kit is built to OE-style form, fit, and function standards.
