Dynamite Friction 4514-76029 Disc Brake Kit - Front and Rear
Brake Kit for 2004 Toyota Camry
This DFC brake kit combines coated rotors, 5000 Advanced ceramic pads, and matching hardware for the front and rear of a 2004 Toyota Camry made in Japan. Part number 4514-76029 is built for buyers looking for a complete brake service package with OE-style fitment details and corrosion-resistant rotor surfaces.
Key Features
- Fits 2004 Toyota Camry, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4514-76029
Product Details
DFC Complete Brake Kits are organized to simplify brake service by grouping the rotors, pads, and hardware needed for a front and rear brake job. The GEOSPEC rotors are machined to OE-style tolerances, processed dry, and ready to install without cleaning off oil residue. The 5000 Advanced pads are formulated for stable friction performance and are assembled with shims that help reduce brake noise and harshness. For a 2004 Toyota Camry brake replacement, this kit supports a full axle service with components matched for durability, balance, and consistent pedal feel. Part number 4514-76029 is also referenced as 4514-76029 in catalog listings.
Common Brake Service Issues
- Brake pulsation from worn or uneven rotors
- Squealing or noise from aged pads and hardware
- Corrosion on rotor surfaces
- Reduced braking consistency from fatigued friction material
- Uneven pad wear caused by worn hardware
Installation Notes
Before installation, confirm rotor size, caliper condition, and all vehicle-specific brake service requirements for the 2004 Toyota Camry. Clean the hub mounting surface, inspect caliper slides, and follow proper bedding procedures after installation. The dry rotor finish helps reduce prep time, and the non-directional machining supports a smoother initial pad seat. Part number 4514-76029 should be verified against the vehicle’s brake configuration before service begins.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications, inspected for critical dimensions, and balanced where required. The rotors carry a 12-month warranty against defects in material and workmanship. DFC 5000 Advanced pads are post-cured and scorched for stable friction performance, while the hardware kit is built with OE-style form, fit, and function in mind.
Brake Kit for 2004 Toyota Camry
This DFC brake kit combines coated rotors, 5000 Advanced ceramic pads, and matching hardware for the front and rear of a 2004 Toyota Camry made in Japan. Part number 4514-76029 is built for buyers looking for a complete brake service package with OE-style fitment details and corrosion-resistant rotor surfaces.
Key Features
- Fits 2004 Toyota Camry, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4514-76029
Product Details
DFC Complete Brake Kits are organized to simplify brake service by grouping the rotors, pads, and hardware needed for a front and rear brake job. The GEOSPEC rotors are machined to OE-style tolerances, processed dry, and ready to install without cleaning off oil residue. The 5000 Advanced pads are formulated for stable friction performance and are assembled with shims that help reduce brake noise and harshness. For a 2004 Toyota Camry brake replacement, this kit supports a full axle service with components matched for durability, balance, and consistent pedal feel. Part number 4514-76029 is also referenced as 4514-76029 in catalog listings.
Common Brake Service Issues
- Brake pulsation from worn or uneven rotors
- Squealing or noise from aged pads and hardware
- Corrosion on rotor surfaces
- Reduced braking consistency from fatigued friction material
- Uneven pad wear caused by worn hardware
Installation Notes
Before installation, confirm rotor size, caliper condition, and all vehicle-specific brake service requirements for the 2004 Toyota Camry. Clean the hub mounting surface, inspect caliper slides, and follow proper bedding procedures after installation. The dry rotor finish helps reduce prep time, and the non-directional machining supports a smoother initial pad seat. Part number 4514-76029 should be verified against the vehicle’s brake configuration before service begins.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications, inspected for critical dimensions, and balanced where required. The rotors carry a 12-month warranty against defects in material and workmanship. DFC 5000 Advanced pads are post-cured and scorched for stable friction performance, while the hardware kit is built with OE-style form, fit, and function in mind.
Original: $327.82
-65%$327.82
$114.74Description
Brake Kit for 2004 Toyota Camry
This DFC brake kit combines coated rotors, 5000 Advanced ceramic pads, and matching hardware for the front and rear of a 2004 Toyota Camry made in Japan. Part number 4514-76029 is built for buyers looking for a complete brake service package with OE-style fitment details and corrosion-resistant rotor surfaces.
Key Features
- Fits 2004 Toyota Camry, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4514-76029
Product Details
DFC Complete Brake Kits are organized to simplify brake service by grouping the rotors, pads, and hardware needed for a front and rear brake job. The GEOSPEC rotors are machined to OE-style tolerances, processed dry, and ready to install without cleaning off oil residue. The 5000 Advanced pads are formulated for stable friction performance and are assembled with shims that help reduce brake noise and harshness. For a 2004 Toyota Camry brake replacement, this kit supports a full axle service with components matched for durability, balance, and consistent pedal feel. Part number 4514-76029 is also referenced as 4514-76029 in catalog listings.
Common Brake Service Issues
- Brake pulsation from worn or uneven rotors
- Squealing or noise from aged pads and hardware
- Corrosion on rotor surfaces
- Reduced braking consistency from fatigued friction material
- Uneven pad wear caused by worn hardware
Installation Notes
Before installation, confirm rotor size, caliper condition, and all vehicle-specific brake service requirements for the 2004 Toyota Camry. Clean the hub mounting surface, inspect caliper slides, and follow proper bedding procedures after installation. The dry rotor finish helps reduce prep time, and the non-directional machining supports a smoother initial pad seat. Part number 4514-76029 should be verified against the vehicle’s brake configuration before service begins.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications, inspected for critical dimensions, and balanced where required. The rotors carry a 12-month warranty against defects in material and workmanship. DFC 5000 Advanced pads are post-cured and scorched for stable friction performance, while the hardware kit is built with OE-style form, fit, and function in mind.
