Dynamite Friction 4514-76019 Disc Brake Kit - Front and Rear
Brake Kit for 2001-2003 Toyota Highlander
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for the front and rear brake service on the 2001-2003 Toyota Highlander. Part number 4514-76019 combines coated rotors, ceramic pads, and matching hardware in one service kit for a complete brake refresh.
Key Features
- Fits 2001-2003 Toyota Highlander, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- G3000/G11H18 cast iron construction for OE-style durability and stability
- Non-directional rotor finish for even pad bed-in and smoother braking
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4514-76019
Product Details
This brake service kit is designed for drivers servicing a Toyota Highlander brake job with matched components from the same product line. The DFC GEOSPEC coated rotors are machined to tight tolerances, inspected for critical dimensions, and finished to support quieter stops and more even pad contact. The 5000 Advanced ceramic pads are formulated for stable friction performance, while the included hardware kit addresses worn or corroded brake hardware that can contribute to noise, uneven wear, and caliper movement. Part number 4514-76019 is a direct fit for the listed Highlander applications.
DFC Complete Brake Kits package the rotor, pad, and hardware components together for a front and rear brake service on the 2001-2003 Toyota Highlander. If you are searching for a 2001 Toyota Highlander front and rear brake kit, a 2002 Toyota Highlander disc brake kit, or a 2003 Toyota Highlander brake rotor and pad set, this application matches those needs.
Common Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven pad wear from aged brake hardware
- Longer stopping distances caused by worn friction material
- Rotor vibration or inconsistent pedal feel from worn service parts
Installation Notes
Each rotor is processed dry and ready for installation, which helps reduce prep time during service. The rotor coating is removed naturally by the brake pads during normal use. For best results, inspect calipers, slides, and brake fluid condition before completing the job, and follow the vehicle manufacturer’s service procedure for bed-in and torque specifications.
Quality Assurance
DFC rotors are inspected for balance and critical dimensions to meet OE specifications, and the rotors include a 12-month warranty against defects in material and workmanship. The pads are post-cured and scorched for stable friction performance, and the hardware kit is engineered to OE-style form, fit, and function.
Brake Kit for 2001-2003 Toyota Highlander
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for the front and rear brake service on the 2001-2003 Toyota Highlander. Part number 4514-76019 combines coated rotors, ceramic pads, and matching hardware in one service kit for a complete brake refresh.
Key Features
- Fits 2001-2003 Toyota Highlander, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- G3000/G11H18 cast iron construction for OE-style durability and stability
- Non-directional rotor finish for even pad bed-in and smoother braking
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4514-76019
Product Details
This brake service kit is designed for drivers servicing a Toyota Highlander brake job with matched components from the same product line. The DFC GEOSPEC coated rotors are machined to tight tolerances, inspected for critical dimensions, and finished to support quieter stops and more even pad contact. The 5000 Advanced ceramic pads are formulated for stable friction performance, while the included hardware kit addresses worn or corroded brake hardware that can contribute to noise, uneven wear, and caliper movement. Part number 4514-76019 is a direct fit for the listed Highlander applications.
DFC Complete Brake Kits package the rotor, pad, and hardware components together for a front and rear brake service on the 2001-2003 Toyota Highlander. If you are searching for a 2001 Toyota Highlander front and rear brake kit, a 2002 Toyota Highlander disc brake kit, or a 2003 Toyota Highlander brake rotor and pad set, this application matches those needs.
Common Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven pad wear from aged brake hardware
- Longer stopping distances caused by worn friction material
- Rotor vibration or inconsistent pedal feel from worn service parts
Installation Notes
Each rotor is processed dry and ready for installation, which helps reduce prep time during service. The rotor coating is removed naturally by the brake pads during normal use. For best results, inspect calipers, slides, and brake fluid condition before completing the job, and follow the vehicle manufacturer’s service procedure for bed-in and torque specifications.
Quality Assurance
DFC rotors are inspected for balance and critical dimensions to meet OE specifications, and the rotors include a 12-month warranty against defects in material and workmanship. The pads are post-cured and scorched for stable friction performance, and the hardware kit is engineered to OE-style form, fit, and function.
Original: $333.80
-65%$333.80
$116.83Description
Brake Kit for 2001-2003 Toyota Highlander
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for the front and rear brake service on the 2001-2003 Toyota Highlander. Part number 4514-76019 combines coated rotors, ceramic pads, and matching hardware in one service kit for a complete brake refresh.
Key Features
- Fits 2001-2003 Toyota Highlander, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- G3000/G11H18 cast iron construction for OE-style durability and stability
- Non-directional rotor finish for even pad bed-in and smoother braking
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4514-76019
Product Details
This brake service kit is designed for drivers servicing a Toyota Highlander brake job with matched components from the same product line. The DFC GEOSPEC coated rotors are machined to tight tolerances, inspected for critical dimensions, and finished to support quieter stops and more even pad contact. The 5000 Advanced ceramic pads are formulated for stable friction performance, while the included hardware kit addresses worn or corroded brake hardware that can contribute to noise, uneven wear, and caliper movement. Part number 4514-76019 is a direct fit for the listed Highlander applications.
DFC Complete Brake Kits package the rotor, pad, and hardware components together for a front and rear brake service on the 2001-2003 Toyota Highlander. If you are searching for a 2001 Toyota Highlander front and rear brake kit, a 2002 Toyota Highlander disc brake kit, or a 2003 Toyota Highlander brake rotor and pad set, this application matches those needs.
Common Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven pad wear from aged brake hardware
- Longer stopping distances caused by worn friction material
- Rotor vibration or inconsistent pedal feel from worn service parts
Installation Notes
Each rotor is processed dry and ready for installation, which helps reduce prep time during service. The rotor coating is removed naturally by the brake pads during normal use. For best results, inspect calipers, slides, and brake fluid condition before completing the job, and follow the vehicle manufacturer’s service procedure for bed-in and torque specifications.
Quality Assurance
DFC rotors are inspected for balance and critical dimensions to meet OE specifications, and the rotors include a 12-month warranty against defects in material and workmanship. The pads are post-cured and scorched for stable friction performance, and the hardware kit is engineered to OE-style form, fit, and function.
