Dynamite Friction 4514-74055 Disc Brake Kit - Front and Rear
Brake Kit for 2008-2010 Volkswagen Passat
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit, part number 4514-74055, is a complete brake service solution for the 2008-2010 Volkswagen Passat. It combines coated rotors, ceramic pads, and brake hardware in one package for front and rear service.
Key Features
- Fits 2008-2010 Volkswagen Passat, front and rear
- DFC GEOSPEC coated rotors with dry-to-install silver-gray corrosion protection
- 5000 Advanced ceramic brake pads with post-cured friction material
- Non-directional rotor finish for even pad bed-in and smoother braking
- Premium rubber-steel-rubber shims for reduced noise and vibration
- Part number 4514-74055 for application lookup and ordering
Product Details
DFC designed this brake kit to match OE-style form, fit, and function for the Volkswagen Passat. The rotors use G3000/G11H18 cast iron and are machined to tight tolerances, then inspected for balance and critical dimensions. The coated surface helps resist rust, while the ceramic pads are scorched to reduce initial break-in and provide stable friction from the first stop. DFC hardware uses PTFE coating, vulcanized rubber, and stainless steel to address wear, caliper movement, and brake noise.
This part number 4514-74055 is a practical choice for drivers searching for a 2008 Volkswagen Passat brake kit, 2009 Volkswagen Passat front and rear rotors and pads, or a 2010 Volkswagen Passat complete brake service kit.
Common Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Rust buildup on uncoated rotors
- Longer stopping distances from worn friction material
- Vibration or harshness during braking
Installation Notes
Before installation, confirm rotor size and brake configuration against the vehicle and existing components. Clean the rotor friction surfaces only as needed during handling, and follow standard brake service procedures for pad bedding and torque specifications. Because this kit is designed for front and rear service on the listed Passat applications, it is suited to a full brake refresh on one vehicle.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected after machining, and vented rotors are balance-checked and corrected when needed. The rotors carry a 12-month warranty against defects in material and workmanship. DFC also post-cures its brake pads and uses premium shims to support consistent friction performance and quieter operation.
Brake Kit for 2008-2010 Volkswagen Passat
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit, part number 4514-74055, is a complete brake service solution for the 2008-2010 Volkswagen Passat. It combines coated rotors, ceramic pads, and brake hardware in one package for front and rear service.
Key Features
- Fits 2008-2010 Volkswagen Passat, front and rear
- DFC GEOSPEC coated rotors with dry-to-install silver-gray corrosion protection
- 5000 Advanced ceramic brake pads with post-cured friction material
- Non-directional rotor finish for even pad bed-in and smoother braking
- Premium rubber-steel-rubber shims for reduced noise and vibration
- Part number 4514-74055 for application lookup and ordering
Product Details
DFC designed this brake kit to match OE-style form, fit, and function for the Volkswagen Passat. The rotors use G3000/G11H18 cast iron and are machined to tight tolerances, then inspected for balance and critical dimensions. The coated surface helps resist rust, while the ceramic pads are scorched to reduce initial break-in and provide stable friction from the first stop. DFC hardware uses PTFE coating, vulcanized rubber, and stainless steel to address wear, caliper movement, and brake noise.
This part number 4514-74055 is a practical choice for drivers searching for a 2008 Volkswagen Passat brake kit, 2009 Volkswagen Passat front and rear rotors and pads, or a 2010 Volkswagen Passat complete brake service kit.
Common Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Rust buildup on uncoated rotors
- Longer stopping distances from worn friction material
- Vibration or harshness during braking
Installation Notes
Before installation, confirm rotor size and brake configuration against the vehicle and existing components. Clean the rotor friction surfaces only as needed during handling, and follow standard brake service procedures for pad bedding and torque specifications. Because this kit is designed for front and rear service on the listed Passat applications, it is suited to a full brake refresh on one vehicle.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected after machining, and vented rotors are balance-checked and corrected when needed. The rotors carry a 12-month warranty against defects in material and workmanship. DFC also post-cures its brake pads and uses premium shims to support consistent friction performance and quieter operation.
Original: $346.55
-65%$346.55
$121.29Description
Brake Kit for 2008-2010 Volkswagen Passat
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit, part number 4514-74055, is a complete brake service solution for the 2008-2010 Volkswagen Passat. It combines coated rotors, ceramic pads, and brake hardware in one package for front and rear service.
Key Features
- Fits 2008-2010 Volkswagen Passat, front and rear
- DFC GEOSPEC coated rotors with dry-to-install silver-gray corrosion protection
- 5000 Advanced ceramic brake pads with post-cured friction material
- Non-directional rotor finish for even pad bed-in and smoother braking
- Premium rubber-steel-rubber shims for reduced noise and vibration
- Part number 4514-74055 for application lookup and ordering
Product Details
DFC designed this brake kit to match OE-style form, fit, and function for the Volkswagen Passat. The rotors use G3000/G11H18 cast iron and are machined to tight tolerances, then inspected for balance and critical dimensions. The coated surface helps resist rust, while the ceramic pads are scorched to reduce initial break-in and provide stable friction from the first stop. DFC hardware uses PTFE coating, vulcanized rubber, and stainless steel to address wear, caliper movement, and brake noise.
This part number 4514-74055 is a practical choice for drivers searching for a 2008 Volkswagen Passat brake kit, 2009 Volkswagen Passat front and rear rotors and pads, or a 2010 Volkswagen Passat complete brake service kit.
Common Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Rust buildup on uncoated rotors
- Longer stopping distances from worn friction material
- Vibration or harshness during braking
Installation Notes
Before installation, confirm rotor size and brake configuration against the vehicle and existing components. Clean the rotor friction surfaces only as needed during handling, and follow standard brake service procedures for pad bedding and torque specifications. Because this kit is designed for front and rear service on the listed Passat applications, it is suited to a full brake refresh on one vehicle.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected after machining, and vented rotors are balance-checked and corrected when needed. The rotors carry a 12-month warranty against defects in material and workmanship. DFC also post-cures its brake pads and uses premium shims to support consistent friction performance and quieter operation.
