Dynamite Friction 4514-74027 Disc Brake Kit - Front and Rear
Brake Kit for Volkswagen Golf and Jetta
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a complete disc brake service solution for select Volkswagen applications. Part number 4514-74027 combines coated rotors, ceramic brake pads, and matching hardware for front and rear brake service on confirmed fitments.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors that are ready to install without oil removal
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish for even pad bed-in and smoother braking
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Hardware kit with PTFE coating, vulcanized rubber, and stainless steel components
Product Line Details
DFC GEOSPEC coated rotors are engineered for corrosion resistance and consistent fitment, while the 5000 Advanced pad line is formulated for stable friction performance across a range of vehicle types. The included hardware is designed to restore proper caliper movement and spring tension during brake service.
Detailed Description
Part number 4514-74027 is built for drivers servicing a 2010 Volkswagen Golf, front and rear, as well as a 2010 Volkswagen Jetta sportwagen with TRW/Girling rear calipers and 260mm rear rotors, and a 2009 Volkswagen Jetta sportwagen. The rotor set is machined to tight tolerances, balanced where required, and finished with a non-directional surface to support quieter stops and more even pad contact. The ceramic pad formulation is post cured and scorched for stable friction from the first stop, while the hardware kit addresses wear, corrosion, and caliper movement that can affect braking feel.
Used For
- Replacing worn rotors and pads on a Volkswagen Golf or Jetta brake service
- Correcting brake noise caused by fatigued or corroded hardware
- Restoring pedal feel after rotor wear, pad glazing, or uneven braking
- Addressing rust buildup on exposed rotor surfaces
- Improving brake consistency during routine front and rear maintenance
Installation Notes and Fitment
- Fits 2010 Volkswagen Golf, front and rear; 260mm rear rotors
- Fits 2010 Volkswagen Jetta, front and rear; sportwagen; with TRW/Girling rear calipers; 260mm rear rotors
- Fits 2009 Volkswagen Jetta, front and rear; sportwagen
- Confirm rotor size and rear caliper type before installation
- Follow standard brake bedding procedures after installation
Quality Assurance
DFC rotors are inspected for critical dimensions and, where applicable, balance correction before release. The rotors carry a 12-month warranty against defects in material and workmanship. Part number 4514-74027 is built to OE-style specifications for the listed Volkswagen Golf and Jetta applications.
Brake Kit for Volkswagen Golf and Jetta
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a complete disc brake service solution for select Volkswagen applications. Part number 4514-74027 combines coated rotors, ceramic brake pads, and matching hardware for front and rear brake service on confirmed fitments.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors that are ready to install without oil removal
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish for even pad bed-in and smoother braking
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Hardware kit with PTFE coating, vulcanized rubber, and stainless steel components
Product Line Details
DFC GEOSPEC coated rotors are engineered for corrosion resistance and consistent fitment, while the 5000 Advanced pad line is formulated for stable friction performance across a range of vehicle types. The included hardware is designed to restore proper caliper movement and spring tension during brake service.
Detailed Description
Part number 4514-74027 is built for drivers servicing a 2010 Volkswagen Golf, front and rear, as well as a 2010 Volkswagen Jetta sportwagen with TRW/Girling rear calipers and 260mm rear rotors, and a 2009 Volkswagen Jetta sportwagen. The rotor set is machined to tight tolerances, balanced where required, and finished with a non-directional surface to support quieter stops and more even pad contact. The ceramic pad formulation is post cured and scorched for stable friction from the first stop, while the hardware kit addresses wear, corrosion, and caliper movement that can affect braking feel.
Used For
- Replacing worn rotors and pads on a Volkswagen Golf or Jetta brake service
- Correcting brake noise caused by fatigued or corroded hardware
- Restoring pedal feel after rotor wear, pad glazing, or uneven braking
- Addressing rust buildup on exposed rotor surfaces
- Improving brake consistency during routine front and rear maintenance
Installation Notes and Fitment
- Fits 2010 Volkswagen Golf, front and rear; 260mm rear rotors
- Fits 2010 Volkswagen Jetta, front and rear; sportwagen; with TRW/Girling rear calipers; 260mm rear rotors
- Fits 2009 Volkswagen Jetta, front and rear; sportwagen
- Confirm rotor size and rear caliper type before installation
- Follow standard brake bedding procedures after installation
Quality Assurance
DFC rotors are inspected for critical dimensions and, where applicable, balance correction before release. The rotors carry a 12-month warranty against defects in material and workmanship. Part number 4514-74027 is built to OE-style specifications for the listed Volkswagen Golf and Jetta applications.
Description
Brake Kit for Volkswagen Golf and Jetta
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a complete disc brake service solution for select Volkswagen applications. Part number 4514-74027 combines coated rotors, ceramic brake pads, and matching hardware for front and rear brake service on confirmed fitments.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors that are ready to install without oil removal
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish for even pad bed-in and smoother braking
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Hardware kit with PTFE coating, vulcanized rubber, and stainless steel components
Product Line Details
DFC GEOSPEC coated rotors are engineered for corrosion resistance and consistent fitment, while the 5000 Advanced pad line is formulated for stable friction performance across a range of vehicle types. The included hardware is designed to restore proper caliper movement and spring tension during brake service.
Detailed Description
Part number 4514-74027 is built for drivers servicing a 2010 Volkswagen Golf, front and rear, as well as a 2010 Volkswagen Jetta sportwagen with TRW/Girling rear calipers and 260mm rear rotors, and a 2009 Volkswagen Jetta sportwagen. The rotor set is machined to tight tolerances, balanced where required, and finished with a non-directional surface to support quieter stops and more even pad contact. The ceramic pad formulation is post cured and scorched for stable friction from the first stop, while the hardware kit addresses wear, corrosion, and caliper movement that can affect braking feel.
Used For
- Replacing worn rotors and pads on a Volkswagen Golf or Jetta brake service
- Correcting brake noise caused by fatigued or corroded hardware
- Restoring pedal feel after rotor wear, pad glazing, or uneven braking
- Addressing rust buildup on exposed rotor surfaces
- Improving brake consistency during routine front and rear maintenance
Installation Notes and Fitment
- Fits 2010 Volkswagen Golf, front and rear; 260mm rear rotors
- Fits 2010 Volkswagen Jetta, front and rear; sportwagen; with TRW/Girling rear calipers; 260mm rear rotors
- Fits 2009 Volkswagen Jetta, front and rear; sportwagen
- Confirm rotor size and rear caliper type before installation
- Follow standard brake bedding procedures after installation
Quality Assurance
DFC rotors are inspected for critical dimensions and, where applicable, balance correction before release. The rotors carry a 12-month warranty against defects in material and workmanship. Part number 4514-74027 is built to OE-style specifications for the listed Volkswagen Golf and Jetta applications.
