Dynamite Friction 4514-74024 Disc Brake Kit - Front and Rear
Brake Kit for Porsche Cayenne
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a front and rear brake service kit for select Porsche Cayenne models. Part number 4514-74024 combines coated rotors, low metallic pads, and brake hardware components in one package for a complete brake refresh.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install, with no oil coating to clean off
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- DFC 5000 Advanced low metallic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
Part number 4514-74024 is built for Porsche Cayenne brake service applications where rotor corrosion resistance, consistent pedal feel, and OE-style fit are important. The coated rotors are machined to tight tolerances and inspected for critical dimensions and balance, while the 5000 Advanced pads are formulated for stable friction performance across a wide range of driving conditions. This brake kit is a practical choice for Porsche Cayenne front and rear brake replacement on 2003-2010 vehicles, including 2003-2006 Porsche Cayenne with black calipers.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Rotor rust and surface corrosion
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear and caliper movement
- Longer brake service time caused by unprepared rotors
- Reduced braking consistency from aged friction components
Installation Notes
Compatible With 2003-2006 Porsche Cayenne, front and rear; 2004-2006 Porsche Cayenne, front and rear; 2008-2010 Porsche Cayenne, front and rear. Verify caliper configuration before ordering, especially on 2003-2006 Porsche Cayenne models with black calipers. Clean all mating surfaces, follow proper torque specifications, and complete a full brake bed-in procedure after installation. Part number 4514-74024 is supplied as a complete service kit for the listed applications.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications, inspected for critical attributes, and covered by a 12-month warranty against defects in material and workmanship. The brake pads are post-cured, scorched, and assembled with premium shims to support stable friction performance and quieter operation.
Brake Kit for Porsche Cayenne
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a front and rear brake service kit for select Porsche Cayenne models. Part number 4514-74024 combines coated rotors, low metallic pads, and brake hardware components in one package for a complete brake refresh.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install, with no oil coating to clean off
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- DFC 5000 Advanced low metallic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
Part number 4514-74024 is built for Porsche Cayenne brake service applications where rotor corrosion resistance, consistent pedal feel, and OE-style fit are important. The coated rotors are machined to tight tolerances and inspected for critical dimensions and balance, while the 5000 Advanced pads are formulated for stable friction performance across a wide range of driving conditions. This brake kit is a practical choice for Porsche Cayenne front and rear brake replacement on 2003-2010 vehicles, including 2003-2006 Porsche Cayenne with black calipers.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Rotor rust and surface corrosion
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear and caliper movement
- Longer brake service time caused by unprepared rotors
- Reduced braking consistency from aged friction components
Installation Notes
Compatible With 2003-2006 Porsche Cayenne, front and rear; 2004-2006 Porsche Cayenne, front and rear; 2008-2010 Porsche Cayenne, front and rear. Verify caliper configuration before ordering, especially on 2003-2006 Porsche Cayenne models with black calipers. Clean all mating surfaces, follow proper torque specifications, and complete a full brake bed-in procedure after installation. Part number 4514-74024 is supplied as a complete service kit for the listed applications.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications, inspected for critical attributes, and covered by a 12-month warranty against defects in material and workmanship. The brake pads are post-cured, scorched, and assembled with premium shims to support stable friction performance and quieter operation.
Description
Brake Kit for Porsche Cayenne
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a front and rear brake service kit for select Porsche Cayenne models. Part number 4514-74024 combines coated rotors, low metallic pads, and brake hardware components in one package for a complete brake refresh.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install, with no oil coating to clean off
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- DFC 5000 Advanced low metallic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
Part number 4514-74024 is built for Porsche Cayenne brake service applications where rotor corrosion resistance, consistent pedal feel, and OE-style fit are important. The coated rotors are machined to tight tolerances and inspected for critical dimensions and balance, while the 5000 Advanced pads are formulated for stable friction performance across a wide range of driving conditions. This brake kit is a practical choice for Porsche Cayenne front and rear brake replacement on 2003-2010 vehicles, including 2003-2006 Porsche Cayenne with black calipers.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Rotor rust and surface corrosion
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear and caliper movement
- Longer brake service time caused by unprepared rotors
- Reduced braking consistency from aged friction components
Installation Notes
Compatible With 2003-2006 Porsche Cayenne, front and rear; 2004-2006 Porsche Cayenne, front and rear; 2008-2010 Porsche Cayenne, front and rear. Verify caliper configuration before ordering, especially on 2003-2006 Porsche Cayenne models with black calipers. Clean all mating surfaces, follow proper torque specifications, and complete a full brake bed-in procedure after installation. Part number 4514-74024 is supplied as a complete service kit for the listed applications.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications, inspected for critical attributes, and covered by a 12-month warranty against defects in material and workmanship. The brake pads are post-cured, scorched, and assembled with premium shims to support stable friction performance and quieter operation.
