Dynamite Friction 4514-74021 Disc Brake Kit - Front and Rear
Brake Kit for Audi Q7 and Porsche Cayenne
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a front and rear brake service solution for select Audi Q7 and Porsche Cayenne applications. Part number 4514-74021 combines coated rotors, low metallic pads, and brake hardware components in one package for a complete brake refresh.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced low metallic brake pads with post-cured friction material
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Dry-processed rotors that are ready to install without oil removal
- OE-style rotor machining with non-directional finish for smoother pad bed-in
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4514-74021 for front and rear brake service
Product Details
DFC GEOSPEC rotors are cast to G3000/G11H18 specifications, machined to tight tolerances, and finished with a non-directional surface to support even pad contact and quieter stops. The coated surface helps resist rust better than conventional paint or zinc finishes, and the rotors are shipped dry so installation does not require cleaning off protective oil. The 5000 Advanced pads are post cured, scorched, and assembled with premium shims to help deliver stable friction and reduced NVH. Part number 4514-74021 is built for drivers servicing Audi Q7 brake rotors and pads or Porsche Cayenne brake rotors and pads with a matched hardware kit.
Vehicle Fitment
- Fits 2007-2015 Audi Q7, Front and Rear
- Fits 2005-2006 Porsche Cayenne, Front and Rear, without E81 Power Package
- Fits 2003-2004 Porsche Cayenne, Front and Rear
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Longer stopping response from worn friction material
- Rotor rust and surface corrosion on exposed braking components
- Excessive caliper movement related to aged brake hardware
Installation Notes
Verify rotor size, brake package, and model-year application before ordering. This kit is listed for front and rear service on the vehicles shown above, and the 2005-2006 Porsche Cayenne application excludes the E81 Power Package. Clean the hub surface thoroughly, inspect calipers and slides, and follow proper bedding procedures after installation to help the pads and rotors seat evenly.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected after machining, including balance checks on vented rotors, and every rotor is covered by a 12-month warranty against defects in material and workmanship. DFC brake pads are post cured and scorched for stable friction performance, while the hardware kit is engineered to OE form, fit, and function.
Brake Kit for Audi Q7 and Porsche Cayenne
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a front and rear brake service solution for select Audi Q7 and Porsche Cayenne applications. Part number 4514-74021 combines coated rotors, low metallic pads, and brake hardware components in one package for a complete brake refresh.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced low metallic brake pads with post-cured friction material
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Dry-processed rotors that are ready to install without oil removal
- OE-style rotor machining with non-directional finish for smoother pad bed-in
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4514-74021 for front and rear brake service
Product Details
DFC GEOSPEC rotors are cast to G3000/G11H18 specifications, machined to tight tolerances, and finished with a non-directional surface to support even pad contact and quieter stops. The coated surface helps resist rust better than conventional paint or zinc finishes, and the rotors are shipped dry so installation does not require cleaning off protective oil. The 5000 Advanced pads are post cured, scorched, and assembled with premium shims to help deliver stable friction and reduced NVH. Part number 4514-74021 is built for drivers servicing Audi Q7 brake rotors and pads or Porsche Cayenne brake rotors and pads with a matched hardware kit.
Vehicle Fitment
- Fits 2007-2015 Audi Q7, Front and Rear
- Fits 2005-2006 Porsche Cayenne, Front and Rear, without E81 Power Package
- Fits 2003-2004 Porsche Cayenne, Front and Rear
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Longer stopping response from worn friction material
- Rotor rust and surface corrosion on exposed braking components
- Excessive caliper movement related to aged brake hardware
Installation Notes
Verify rotor size, brake package, and model-year application before ordering. This kit is listed for front and rear service on the vehicles shown above, and the 2005-2006 Porsche Cayenne application excludes the E81 Power Package. Clean the hub surface thoroughly, inspect calipers and slides, and follow proper bedding procedures after installation to help the pads and rotors seat evenly.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected after machining, including balance checks on vented rotors, and every rotor is covered by a 12-month warranty against defects in material and workmanship. DFC brake pads are post cured and scorched for stable friction performance, while the hardware kit is engineered to OE form, fit, and function.
Description
Brake Kit for Audi Q7 and Porsche Cayenne
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a front and rear brake service solution for select Audi Q7 and Porsche Cayenne applications. Part number 4514-74021 combines coated rotors, low metallic pads, and brake hardware components in one package for a complete brake refresh.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced low metallic brake pads with post-cured friction material
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Dry-processed rotors that are ready to install without oil removal
- OE-style rotor machining with non-directional finish for smoother pad bed-in
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4514-74021 for front and rear brake service
Product Details
DFC GEOSPEC rotors are cast to G3000/G11H18 specifications, machined to tight tolerances, and finished with a non-directional surface to support even pad contact and quieter stops. The coated surface helps resist rust better than conventional paint or zinc finishes, and the rotors are shipped dry so installation does not require cleaning off protective oil. The 5000 Advanced pads are post cured, scorched, and assembled with premium shims to help deliver stable friction and reduced NVH. Part number 4514-74021 is built for drivers servicing Audi Q7 brake rotors and pads or Porsche Cayenne brake rotors and pads with a matched hardware kit.
Vehicle Fitment
- Fits 2007-2015 Audi Q7, Front and Rear
- Fits 2005-2006 Porsche Cayenne, Front and Rear, without E81 Power Package
- Fits 2003-2004 Porsche Cayenne, Front and Rear
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Longer stopping response from worn friction material
- Rotor rust and surface corrosion on exposed braking components
- Excessive caliper movement related to aged brake hardware
Installation Notes
Verify rotor size, brake package, and model-year application before ordering. This kit is listed for front and rear service on the vehicles shown above, and the 2005-2006 Porsche Cayenne application excludes the E81 Power Package. Clean the hub surface thoroughly, inspect calipers and slides, and follow proper bedding procedures after installation to help the pads and rotors seat evenly.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected after machining, including balance checks on vented rotors, and every rotor is covered by a 12-month warranty against defects in material and workmanship. DFC brake pads are post cured and scorched for stable friction performance, while the hardware kit is engineered to OE form, fit, and function.
