Dynamite Friction 4514-73055 Disc Brake Kit - Front and Rear
Brake Kit for Audi A4 allroad and allroad
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Low Metallic and Hardware Kit, part number 4514-73055, is a front and rear disc brake kit built for 2013-2016 Audi A4 allroad and 2013-2016 Audi allroad applications. It combines coated rotors, low metallic pads, and brake hardware components in one service package for a complete brake refresh.
Key Features
- Compatible with 2013-2016 Audi A4 allroad and 2013-2016 Audi allroad, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in and smoother braking
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- DFC 5000 Advanced low metallic brake pads with post-cured friction material
- Scorched pads help reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Brake hardware uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4514-73055
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Low Metallic and Hardware Kit is designed for drivers servicing Audi A4 allroad and Audi allroad brake systems with a direct-fit, OE-style approach. The coated rotors are machined to tight tolerances, inspected for critical dimensions, and finished to promote quieter stops and consistent pad contact. The low metallic pads are formulated for stable friction performance and are assembled with shims that help reduce brake noise and vibration. The included hardware kit is engineered to restore proper caliper movement and spring tension where worn or corroded components can affect braking feel. Part number 4514-73055 is a practical choice for a full front and rear brake service on these Audi applications.
Common Issues This Kit Can Address
- Brake noise during stops
- Rust buildup on rotor surfaces
- Uneven pad wear from fatigued hardware
- Reduced braking smoothness or pedal consistency
- Longer stopping distances caused by worn friction components
Installation Notes
Before installation, confirm vehicle fitment by year, make, model, and axle position. The rotors are shipped dry and ready to install, which helps reduce prep time during service. Inspect caliper slides, mounting points, and related brake components during replacement so the new pads and rotors can bed in evenly. For best results, follow the vehicle manufacturer’s brake service procedure and torque specifications.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications, inspected for critical attributes, and backed by a 12-month warranty against defects in material and workmanship. Part number 4514-73055 reflects a complete brake service solution for Audi A4 allroad and Audi allroad owners seeking coated rotors, low metallic pads, and matched hardware in one kit.
Brake Kit for Audi A4 allroad and allroad
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Low Metallic and Hardware Kit, part number 4514-73055, is a front and rear disc brake kit built for 2013-2016 Audi A4 allroad and 2013-2016 Audi allroad applications. It combines coated rotors, low metallic pads, and brake hardware components in one service package for a complete brake refresh.
Key Features
- Compatible with 2013-2016 Audi A4 allroad and 2013-2016 Audi allroad, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in and smoother braking
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- DFC 5000 Advanced low metallic brake pads with post-cured friction material
- Scorched pads help reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Brake hardware uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4514-73055
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Low Metallic and Hardware Kit is designed for drivers servicing Audi A4 allroad and Audi allroad brake systems with a direct-fit, OE-style approach. The coated rotors are machined to tight tolerances, inspected for critical dimensions, and finished to promote quieter stops and consistent pad contact. The low metallic pads are formulated for stable friction performance and are assembled with shims that help reduce brake noise and vibration. The included hardware kit is engineered to restore proper caliper movement and spring tension where worn or corroded components can affect braking feel. Part number 4514-73055 is a practical choice for a full front and rear brake service on these Audi applications.
Common Issues This Kit Can Address
- Brake noise during stops
- Rust buildup on rotor surfaces
- Uneven pad wear from fatigued hardware
- Reduced braking smoothness or pedal consistency
- Longer stopping distances caused by worn friction components
Installation Notes
Before installation, confirm vehicle fitment by year, make, model, and axle position. The rotors are shipped dry and ready to install, which helps reduce prep time during service. Inspect caliper slides, mounting points, and related brake components during replacement so the new pads and rotors can bed in evenly. For best results, follow the vehicle manufacturer’s brake service procedure and torque specifications.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications, inspected for critical attributes, and backed by a 12-month warranty against defects in material and workmanship. Part number 4514-73055 reflects a complete brake service solution for Audi A4 allroad and Audi allroad owners seeking coated rotors, low metallic pads, and matched hardware in one kit.
Original: $416.36
-65%$416.36
$145.73Description
Brake Kit for Audi A4 allroad and allroad
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Low Metallic and Hardware Kit, part number 4514-73055, is a front and rear disc brake kit built for 2013-2016 Audi A4 allroad and 2013-2016 Audi allroad applications. It combines coated rotors, low metallic pads, and brake hardware components in one service package for a complete brake refresh.
Key Features
- Compatible with 2013-2016 Audi A4 allroad and 2013-2016 Audi allroad, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in and smoother braking
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- DFC 5000 Advanced low metallic brake pads with post-cured friction material
- Scorched pads help reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Brake hardware uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4514-73055
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Low Metallic and Hardware Kit is designed for drivers servicing Audi A4 allroad and Audi allroad brake systems with a direct-fit, OE-style approach. The coated rotors are machined to tight tolerances, inspected for critical dimensions, and finished to promote quieter stops and consistent pad contact. The low metallic pads are formulated for stable friction performance and are assembled with shims that help reduce brake noise and vibration. The included hardware kit is engineered to restore proper caliper movement and spring tension where worn or corroded components can affect braking feel. Part number 4514-73055 is a practical choice for a full front and rear brake service on these Audi applications.
Common Issues This Kit Can Address
- Brake noise during stops
- Rust buildup on rotor surfaces
- Uneven pad wear from fatigued hardware
- Reduced braking smoothness or pedal consistency
- Longer stopping distances caused by worn friction components
Installation Notes
Before installation, confirm vehicle fitment by year, make, model, and axle position. The rotors are shipped dry and ready to install, which helps reduce prep time during service. Inspect caliper slides, mounting points, and related brake components during replacement so the new pads and rotors can bed in evenly. For best results, follow the vehicle manufacturer’s brake service procedure and torque specifications.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications, inspected for critical attributes, and backed by a 12-month warranty against defects in material and workmanship. Part number 4514-73055 reflects a complete brake service solution for Audi A4 allroad and Audi allroad owners seeking coated rotors, low metallic pads, and matched hardware in one kit.
