Dynamite Friction 4514-73044 Disc Brake Kit - Front and Rear
Brake Kit for Audi A6 Quattro, A7 Quattro, A8 Quattro
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Low Metallic and Hardware Kit, part number 4514-73044, is a complete disc brake service kit for select Audi applications. It combines coated rotors, low-metallic pads, and brake hardware to support a full front-and-rear brake refresh.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced low-metallic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time and more immediate stopping response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Dry-processed rotors that are ready to install without oil removal
- Non-directional rotor finish for more even pad bed-in and quieter operation
- Hardware kit included for a complete brake service
Product Line Details
DFC 5000 Advanced Brake Pads are formulated for consistent friction performance and are assembled with premium shims to help control brake noise and pedal harshness. The GEOSPEC rotor line uses a coated cast-iron design built to OEM-style dimensions and machining tolerances, with balance inspection on vented rotors and a final inspection process for critical measurements.
Detailed Description
Part number 4514-73044 is built for drivers servicing front and rear brakes on 2012-2014 Audi A6 Quattro, 2012-2013 Audi A7 Quattro, and 2013-2014 Audi A8 Quattro applications. It is a practical choice for Audi A6 Quattro brake replacement, Audi A7 Quattro rotor and pad service, and Audi A8 Quattro complete brake maintenance when you want matched components in one package. The coated rotors help resist rust, while the low-metallic pads are engineered for stable friction and smoother stopping behavior.
This kit is suited for routine brake overhaul work where worn rotors, pad fade, brake noise, or uneven braking feel need to be addressed together. The included hardware supports a more complete service by replacing stressed or corroded brake hardware during the job.
Common Issues This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Squealing or noise caused by aged pads and hardware
- Reduced stopping performance from worn friction material
- Rust buildup on exposed rotor surfaces
- Uneven pad wear from fatigued brake hardware
Installation Notes and Tips
Verify rotor size and brake configuration before ordering, especially on 2012 Audi A6 Quattro applications that note 356mm front rotors. Clean the hub mounting surface before installation, and follow proper bedding procedures after the brake job to help the pads and rotors seat evenly. This kit is intended for front-and-rear service on the listed Audi vehicles only.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE-style specifications using G3000/G11H18 cast iron, then machined to tight tolerances and inspected for critical dimensions. Vented rotors receive balance inspection and correction when needed. Rotors include a 12-month warranty against defects in material and workmanship.
Brake Kit for Audi A6 Quattro, A7 Quattro, A8 Quattro
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Low Metallic and Hardware Kit, part number 4514-73044, is a complete disc brake service kit for select Audi applications. It combines coated rotors, low-metallic pads, and brake hardware to support a full front-and-rear brake refresh.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced low-metallic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time and more immediate stopping response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Dry-processed rotors that are ready to install without oil removal
- Non-directional rotor finish for more even pad bed-in and quieter operation
- Hardware kit included for a complete brake service
Product Line Details
DFC 5000 Advanced Brake Pads are formulated for consistent friction performance and are assembled with premium shims to help control brake noise and pedal harshness. The GEOSPEC rotor line uses a coated cast-iron design built to OEM-style dimensions and machining tolerances, with balance inspection on vented rotors and a final inspection process for critical measurements.
Detailed Description
Part number 4514-73044 is built for drivers servicing front and rear brakes on 2012-2014 Audi A6 Quattro, 2012-2013 Audi A7 Quattro, and 2013-2014 Audi A8 Quattro applications. It is a practical choice for Audi A6 Quattro brake replacement, Audi A7 Quattro rotor and pad service, and Audi A8 Quattro complete brake maintenance when you want matched components in one package. The coated rotors help resist rust, while the low-metallic pads are engineered for stable friction and smoother stopping behavior.
This kit is suited for routine brake overhaul work where worn rotors, pad fade, brake noise, or uneven braking feel need to be addressed together. The included hardware supports a more complete service by replacing stressed or corroded brake hardware during the job.
Common Issues This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Squealing or noise caused by aged pads and hardware
- Reduced stopping performance from worn friction material
- Rust buildup on exposed rotor surfaces
- Uneven pad wear from fatigued brake hardware
Installation Notes and Tips
Verify rotor size and brake configuration before ordering, especially on 2012 Audi A6 Quattro applications that note 356mm front rotors. Clean the hub mounting surface before installation, and follow proper bedding procedures after the brake job to help the pads and rotors seat evenly. This kit is intended for front-and-rear service on the listed Audi vehicles only.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE-style specifications using G3000/G11H18 cast iron, then machined to tight tolerances and inspected for critical dimensions. Vented rotors receive balance inspection and correction when needed. Rotors include a 12-month warranty against defects in material and workmanship.
Original: $513.43
-65%$513.43
$179.70Description
Brake Kit for Audi A6 Quattro, A7 Quattro, A8 Quattro
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Low Metallic and Hardware Kit, part number 4514-73044, is a complete disc brake service kit for select Audi applications. It combines coated rotors, low-metallic pads, and brake hardware to support a full front-and-rear brake refresh.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced low-metallic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time and more immediate stopping response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Dry-processed rotors that are ready to install without oil removal
- Non-directional rotor finish for more even pad bed-in and quieter operation
- Hardware kit included for a complete brake service
Product Line Details
DFC 5000 Advanced Brake Pads are formulated for consistent friction performance and are assembled with premium shims to help control brake noise and pedal harshness. The GEOSPEC rotor line uses a coated cast-iron design built to OEM-style dimensions and machining tolerances, with balance inspection on vented rotors and a final inspection process for critical measurements.
Detailed Description
Part number 4514-73044 is built for drivers servicing front and rear brakes on 2012-2014 Audi A6 Quattro, 2012-2013 Audi A7 Quattro, and 2013-2014 Audi A8 Quattro applications. It is a practical choice for Audi A6 Quattro brake replacement, Audi A7 Quattro rotor and pad service, and Audi A8 Quattro complete brake maintenance when you want matched components in one package. The coated rotors help resist rust, while the low-metallic pads are engineered for stable friction and smoother stopping behavior.
This kit is suited for routine brake overhaul work where worn rotors, pad fade, brake noise, or uneven braking feel need to be addressed together. The included hardware supports a more complete service by replacing stressed or corroded brake hardware during the job.
Common Issues This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Squealing or noise caused by aged pads and hardware
- Reduced stopping performance from worn friction material
- Rust buildup on exposed rotor surfaces
- Uneven pad wear from fatigued brake hardware
Installation Notes and Tips
Verify rotor size and brake configuration before ordering, especially on 2012 Audi A6 Quattro applications that note 356mm front rotors. Clean the hub mounting surface before installation, and follow proper bedding procedures after the brake job to help the pads and rotors seat evenly. This kit is intended for front-and-rear service on the listed Audi vehicles only.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE-style specifications using G3000/G11H18 cast iron, then machined to tight tolerances and inspected for critical dimensions. Vented rotors receive balance inspection and correction when needed. Rotors include a 12-month warranty against defects in material and workmanship.
