Dynamite Friction 4514-73020 Disc Brake Kit - Front and Rear
Brake Kit for Audi A4 Quattro and A4
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a front and rear disc brake kit built for Audi A4 and Audi A4 Quattro applications. Part number 4514-73020 combines coated rotors, low metallic pads, and matching brake hardware for a complete service package.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors that are ready to install without oil removal
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish for even pad bed-in and smoother braking
- DFC 5000 Advanced low metallic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Hardware kit with PTFE coating, vulcanized rubber, and stainless steel components
Product Details
DFC’s GEOSPEC rotor line is designed for drivers who want OE-style fit and consistent braking performance with added corrosion protection. The coated finish helps resist rust better than conventional paint or zinc coatings, while the dry shipping process saves prep time during installation. Each rotor is machined to tight tolerances, finished for smoother pad contact, and inspected to meet OE specifications. The 5000 Advanced pad formulation is built for stable friction performance and quieter operation, making this kit a practical choice for Audi A4 Quattro brake service and Audi A4 front and rear brake replacement. Part number 4514-73020 is also a strong match for buyers searching for a complete Audi brake kit with coated rotors and low metallic pads.
Common Problems This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Rust buildup on exposed rotor surfaces
- Noise caused by fatigued or corroded brake hardware
- Reduced stopping performance from worn pads
- Uneven pad wear from aged hardware components
Installation Notes
Fits 2002-2005 Audi A4, front and rear. Fits 2002-2004 Audi A4 Quattro, front and rear. Fits 2005 Audi A4 Quattro, front and rear. Fits 2006 Audi A4 Quattro, front and rear. One fitment note specifies 312mm front rotors for the 2005 Audi A4 Quattro application, so rotor size should be verified before installation. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Quality Assurance
Each DFC rotor is 100% inspected for critical dimensions and balance, and every rotor includes a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction performance, and the hardware kit is engineered to OE-style form, fit, and function.
Brake Kit for Audi A4 Quattro and A4
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a front and rear disc brake kit built for Audi A4 and Audi A4 Quattro applications. Part number 4514-73020 combines coated rotors, low metallic pads, and matching brake hardware for a complete service package.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors that are ready to install without oil removal
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish for even pad bed-in and smoother braking
- DFC 5000 Advanced low metallic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Hardware kit with PTFE coating, vulcanized rubber, and stainless steel components
Product Details
DFC’s GEOSPEC rotor line is designed for drivers who want OE-style fit and consistent braking performance with added corrosion protection. The coated finish helps resist rust better than conventional paint or zinc coatings, while the dry shipping process saves prep time during installation. Each rotor is machined to tight tolerances, finished for smoother pad contact, and inspected to meet OE specifications. The 5000 Advanced pad formulation is built for stable friction performance and quieter operation, making this kit a practical choice for Audi A4 Quattro brake service and Audi A4 front and rear brake replacement. Part number 4514-73020 is also a strong match for buyers searching for a complete Audi brake kit with coated rotors and low metallic pads.
Common Problems This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Rust buildup on exposed rotor surfaces
- Noise caused by fatigued or corroded brake hardware
- Reduced stopping performance from worn pads
- Uneven pad wear from aged hardware components
Installation Notes
Fits 2002-2005 Audi A4, front and rear. Fits 2002-2004 Audi A4 Quattro, front and rear. Fits 2005 Audi A4 Quattro, front and rear. Fits 2006 Audi A4 Quattro, front and rear. One fitment note specifies 312mm front rotors for the 2005 Audi A4 Quattro application, so rotor size should be verified before installation. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Quality Assurance
Each DFC rotor is 100% inspected for critical dimensions and balance, and every rotor includes a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction performance, and the hardware kit is engineered to OE-style form, fit, and function.
Description
Brake Kit for Audi A4 Quattro and A4
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a front and rear disc brake kit built for Audi A4 and Audi A4 Quattro applications. Part number 4514-73020 combines coated rotors, low metallic pads, and matching brake hardware for a complete service package.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors that are ready to install without oil removal
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish for even pad bed-in and smoother braking
- DFC 5000 Advanced low metallic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Hardware kit with PTFE coating, vulcanized rubber, and stainless steel components
Product Details
DFC’s GEOSPEC rotor line is designed for drivers who want OE-style fit and consistent braking performance with added corrosion protection. The coated finish helps resist rust better than conventional paint or zinc coatings, while the dry shipping process saves prep time during installation. Each rotor is machined to tight tolerances, finished for smoother pad contact, and inspected to meet OE specifications. The 5000 Advanced pad formulation is built for stable friction performance and quieter operation, making this kit a practical choice for Audi A4 Quattro brake service and Audi A4 front and rear brake replacement. Part number 4514-73020 is also a strong match for buyers searching for a complete Audi brake kit with coated rotors and low metallic pads.
Common Problems This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Rust buildup on exposed rotor surfaces
- Noise caused by fatigued or corroded brake hardware
- Reduced stopping performance from worn pads
- Uneven pad wear from aged hardware components
Installation Notes
Fits 2002-2005 Audi A4, front and rear. Fits 2002-2004 Audi A4 Quattro, front and rear. Fits 2005 Audi A4 Quattro, front and rear. Fits 2006 Audi A4 Quattro, front and rear. One fitment note specifies 312mm front rotors for the 2005 Audi A4 Quattro application, so rotor size should be verified before installation. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Quality Assurance
Each DFC rotor is 100% inspected for critical dimensions and balance, and every rotor includes a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction performance, and the hardware kit is engineered to OE-style form, fit, and function.
