Dynamite Friction 4514-67048 Disc Brake Kit - Front and Rear
Brake Kit for OE-Style Stopping Performance
The Dynamite Friction DFC GeoSpec rotor and 5000 Advanced pad kit is built for drivers who want a complete brake service solution with matched components. Part number 4514-67048 combines coated rotors, advanced friction pads, and hardware in one package for a cleaner, more efficient brake job.
Compatible with select vehicle applications, this brake kit is a practical choice for routine brake service on daily drivers, family sedans, performance cars, and light trucks. The DFC Geospec Rotors with 5000 Advanced Brake Pads includes Hardware package is engineered to support quieter operation, stable pedal feel, and OE-style fitment.
Key Features
- Complete disc brake kit with rotors, pads, and hardware
- DFC GeoSpec coated rotors with a silver-gray corrosion-resistant finish
- Dry-to-install rotor coating reduces prep time during brake service
- Non-directional rotor finish supports even pad bed-in and smoother stops
- 5000 Advanced pads are post-cured and scorched for consistent friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware uses PTFE coating, vulcanized rubber, and stainless steel construction
- Part number 4514-67048 for ordering and catalog lookup
Product Details
DFC designs this brake service kit around OE-style requirements for durability, reliability, and stable braking behavior. The GeoSpec rotors are cast to G3000/G11H18 specifications, machined to tight tolerances, and inspected for critical dimensions and balance. The 5000 Advanced pads are formulated for consistent friction output, while the included hardware is designed to restore proper caliper movement and spring tension during service. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application. Part number 4514-67048 is a direct reference for this complete brake kit.
Common Brake Service Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or stressed hardware
- Rotor rust and surface corrosion on exposed braking surfaces
- Reduced stopping consistency from aged friction materials
- Excessive caliper movement from worn brake hardware components
Installation Notes and Tips
Before installation, confirm vehicle fitment by year, make, model, and brake position. Clean the hub mounting surface, inspect calipers and slides, and replace any damaged components before assembly. The rotors are shipped dry and ready to install, so no oil removal is required. Follow proper bedding procedures after installation to help the pads and rotors establish even contact.
Fits select applications for the listed vehicle coverage only; use the exact catalog fitment for confirmation. For search reference, part number 4514-67048 is commonly used when ordering a complete front or rear brake service kit.
Quality Assurance
DFC GeoSpec rotors are manufactured to OE-style specifications, finished with a corrosion-resistant coating, and inspected for balance and critical dimensions. The rotors include a 12-month warranty against defects in material and workmanship.
Brake Kit for OE-Style Stopping Performance
The Dynamite Friction DFC GeoSpec rotor and 5000 Advanced pad kit is built for drivers who want a complete brake service solution with matched components. Part number 4514-67048 combines coated rotors, advanced friction pads, and hardware in one package for a cleaner, more efficient brake job.
Compatible with select vehicle applications, this brake kit is a practical choice for routine brake service on daily drivers, family sedans, performance cars, and light trucks. The DFC Geospec Rotors with 5000 Advanced Brake Pads includes Hardware package is engineered to support quieter operation, stable pedal feel, and OE-style fitment.
Key Features
- Complete disc brake kit with rotors, pads, and hardware
- DFC GeoSpec coated rotors with a silver-gray corrosion-resistant finish
- Dry-to-install rotor coating reduces prep time during brake service
- Non-directional rotor finish supports even pad bed-in and smoother stops
- 5000 Advanced pads are post-cured and scorched for consistent friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware uses PTFE coating, vulcanized rubber, and stainless steel construction
- Part number 4514-67048 for ordering and catalog lookup
Product Details
DFC designs this brake service kit around OE-style requirements for durability, reliability, and stable braking behavior. The GeoSpec rotors are cast to G3000/G11H18 specifications, machined to tight tolerances, and inspected for critical dimensions and balance. The 5000 Advanced pads are formulated for consistent friction output, while the included hardware is designed to restore proper caliper movement and spring tension during service. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application. Part number 4514-67048 is a direct reference for this complete brake kit.
Common Brake Service Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or stressed hardware
- Rotor rust and surface corrosion on exposed braking surfaces
- Reduced stopping consistency from aged friction materials
- Excessive caliper movement from worn brake hardware components
Installation Notes and Tips
Before installation, confirm vehicle fitment by year, make, model, and brake position. Clean the hub mounting surface, inspect calipers and slides, and replace any damaged components before assembly. The rotors are shipped dry and ready to install, so no oil removal is required. Follow proper bedding procedures after installation to help the pads and rotors establish even contact.
Fits select applications for the listed vehicle coverage only; use the exact catalog fitment for confirmation. For search reference, part number 4514-67048 is commonly used when ordering a complete front or rear brake service kit.
Quality Assurance
DFC GeoSpec rotors are manufactured to OE-style specifications, finished with a corrosion-resistant coating, and inspected for balance and critical dimensions. The rotors include a 12-month warranty against defects in material and workmanship.
Original: $247.09
-65%$247.09
$86.48Description
Brake Kit for OE-Style Stopping Performance
The Dynamite Friction DFC GeoSpec rotor and 5000 Advanced pad kit is built for drivers who want a complete brake service solution with matched components. Part number 4514-67048 combines coated rotors, advanced friction pads, and hardware in one package for a cleaner, more efficient brake job.
Compatible with select vehicle applications, this brake kit is a practical choice for routine brake service on daily drivers, family sedans, performance cars, and light trucks. The DFC Geospec Rotors with 5000 Advanced Brake Pads includes Hardware package is engineered to support quieter operation, stable pedal feel, and OE-style fitment.
Key Features
- Complete disc brake kit with rotors, pads, and hardware
- DFC GeoSpec coated rotors with a silver-gray corrosion-resistant finish
- Dry-to-install rotor coating reduces prep time during brake service
- Non-directional rotor finish supports even pad bed-in and smoother stops
- 5000 Advanced pads are post-cured and scorched for consistent friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware uses PTFE coating, vulcanized rubber, and stainless steel construction
- Part number 4514-67048 for ordering and catalog lookup
Product Details
DFC designs this brake service kit around OE-style requirements for durability, reliability, and stable braking behavior. The GeoSpec rotors are cast to G3000/G11H18 specifications, machined to tight tolerances, and inspected for critical dimensions and balance. The 5000 Advanced pads are formulated for consistent friction output, while the included hardware is designed to restore proper caliper movement and spring tension during service. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application. Part number 4514-67048 is a direct reference for this complete brake kit.
Common Brake Service Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or stressed hardware
- Rotor rust and surface corrosion on exposed braking surfaces
- Reduced stopping consistency from aged friction materials
- Excessive caliper movement from worn brake hardware components
Installation Notes and Tips
Before installation, confirm vehicle fitment by year, make, model, and brake position. Clean the hub mounting surface, inspect calipers and slides, and replace any damaged components before assembly. The rotors are shipped dry and ready to install, so no oil removal is required. Follow proper bedding procedures after installation to help the pads and rotors establish even contact.
Fits select applications for the listed vehicle coverage only; use the exact catalog fitment for confirmation. For search reference, part number 4514-67048 is commonly used when ordering a complete front or rear brake service kit.
Quality Assurance
DFC GeoSpec rotors are manufactured to OE-style specifications, finished with a corrosion-resistant coating, and inspected for balance and critical dimensions. The rotors include a 12-month warranty against defects in material and workmanship.
