Dynamite Friction 4514-67040 Disc Brake Kit - Front and Rear
Brake Kit for Nissan Altima
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a front and rear disc brake kit built for Nissan Altima applications from 2013-2025. Part number 4514-67040 combines coated rotors, ceramic brake pads, and brake hardware in one service package for a complete brake refresh.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for smoother pad bedding and quieter stops
- OE-style rotor machining and inspection for dimensional consistency
- Hardware kit included for the listed applications
Product Details
DFC’s GEOSPEC rotor line is engineered for drivers who want a direct replacement brake service with added corrosion protection. The rotors are processed dry and ready to install, which helps reduce prep time during brake service. They are made to G3000/G11H18 cast iron specifications and finished with a non-directional surface to support even pad contact and stable braking feel. The 5000 Advanced pads are formulated for consistent friction performance and use shims that help reduce brake noise and vibration. Part number 4514-67040 is a practical choice for Nissan Altima front and rear brake maintenance when you want matched components in one kit.
DFC brake kits are built around axle-specific friction and rotor specifications for modern vehicles, including the Nissan Altima. This kit is listed for 2013-2018 Nissan Altima, 2019-2020 Nissan Altima with mechanical parking brake (foot applied), 2021-2022 Nissan Altima with mechanical parking brake (foot applied), and 2023-2025 Nissan Altima with manual parking brake.
Common Brake Service Issues
- Brake pulsation from worn or uneven rotors
- Noise caused by fatigued or corroded hardware
- Reduced stopping performance from worn pads
- Uneven pad wear from aged caliper hardware
- Longer service time when rotors require extra prep before installation
Installation Notes
Verify parking brake type before ordering, since fitment varies by Altima year and configuration. Clean all mating surfaces before installation and follow the vehicle manufacturer’s torque specifications. A proper bed-in procedure helps establish even pad transfer on the rotor surface and supports consistent braking performance.
Quality Assurance
Each DFC GEOSPEC rotor is inspected for critical dimensions and balance, and all vented rotors are electronically corrected if needed. The rotors carry a 12-month warranty against defects in material and workmanship. Part number 4514-67040 is built to OE-style standards for fit, finish, and service consistency.
Brake Kit for Nissan Altima
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a front and rear disc brake kit built for Nissan Altima applications from 2013-2025. Part number 4514-67040 combines coated rotors, ceramic brake pads, and brake hardware in one service package for a complete brake refresh.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for smoother pad bedding and quieter stops
- OE-style rotor machining and inspection for dimensional consistency
- Hardware kit included for the listed applications
Product Details
DFC’s GEOSPEC rotor line is engineered for drivers who want a direct replacement brake service with added corrosion protection. The rotors are processed dry and ready to install, which helps reduce prep time during brake service. They are made to G3000/G11H18 cast iron specifications and finished with a non-directional surface to support even pad contact and stable braking feel. The 5000 Advanced pads are formulated for consistent friction performance and use shims that help reduce brake noise and vibration. Part number 4514-67040 is a practical choice for Nissan Altima front and rear brake maintenance when you want matched components in one kit.
DFC brake kits are built around axle-specific friction and rotor specifications for modern vehicles, including the Nissan Altima. This kit is listed for 2013-2018 Nissan Altima, 2019-2020 Nissan Altima with mechanical parking brake (foot applied), 2021-2022 Nissan Altima with mechanical parking brake (foot applied), and 2023-2025 Nissan Altima with manual parking brake.
Common Brake Service Issues
- Brake pulsation from worn or uneven rotors
- Noise caused by fatigued or corroded hardware
- Reduced stopping performance from worn pads
- Uneven pad wear from aged caliper hardware
- Longer service time when rotors require extra prep before installation
Installation Notes
Verify parking brake type before ordering, since fitment varies by Altima year and configuration. Clean all mating surfaces before installation and follow the vehicle manufacturer’s torque specifications. A proper bed-in procedure helps establish even pad transfer on the rotor surface and supports consistent braking performance.
Quality Assurance
Each DFC GEOSPEC rotor is inspected for critical dimensions and balance, and all vented rotors are electronically corrected if needed. The rotors carry a 12-month warranty against defects in material and workmanship. Part number 4514-67040 is built to OE-style standards for fit, finish, and service consistency.
Original: $325.23
-65%$325.23
$113.83Description
Brake Kit for Nissan Altima
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a front and rear disc brake kit built for Nissan Altima applications from 2013-2025. Part number 4514-67040 combines coated rotors, ceramic brake pads, and brake hardware in one service package for a complete brake refresh.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for smoother pad bedding and quieter stops
- OE-style rotor machining and inspection for dimensional consistency
- Hardware kit included for the listed applications
Product Details
DFC’s GEOSPEC rotor line is engineered for drivers who want a direct replacement brake service with added corrosion protection. The rotors are processed dry and ready to install, which helps reduce prep time during brake service. They are made to G3000/G11H18 cast iron specifications and finished with a non-directional surface to support even pad contact and stable braking feel. The 5000 Advanced pads are formulated for consistent friction performance and use shims that help reduce brake noise and vibration. Part number 4514-67040 is a practical choice for Nissan Altima front and rear brake maintenance when you want matched components in one kit.
DFC brake kits are built around axle-specific friction and rotor specifications for modern vehicles, including the Nissan Altima. This kit is listed for 2013-2018 Nissan Altima, 2019-2020 Nissan Altima with mechanical parking brake (foot applied), 2021-2022 Nissan Altima with mechanical parking brake (foot applied), and 2023-2025 Nissan Altima with manual parking brake.
Common Brake Service Issues
- Brake pulsation from worn or uneven rotors
- Noise caused by fatigued or corroded hardware
- Reduced stopping performance from worn pads
- Uneven pad wear from aged caliper hardware
- Longer service time when rotors require extra prep before installation
Installation Notes
Verify parking brake type before ordering, since fitment varies by Altima year and configuration. Clean all mating surfaces before installation and follow the vehicle manufacturer’s torque specifications. A proper bed-in procedure helps establish even pad transfer on the rotor surface and supports consistent braking performance.
Quality Assurance
Each DFC GEOSPEC rotor is inspected for critical dimensions and balance, and all vented rotors are electronically corrected if needed. The rotors carry a 12-month warranty against defects in material and workmanship. Part number 4514-67040 is built to OE-style standards for fit, finish, and service consistency.
