Dynamite Friction 4514-67033 Disc Brake Kit - Front and Rear
Brake Kit for Nissan Juke Front and Rear
DFC Friction part number 4514-67033 is a complete disc brake kit for the 2014-2017 Nissan Juke, covering front and rear service. It combines DFC GEOSPEC coated rotors, 5000 Advanced ceramic brake pads, and matching hardware for a coordinated brake repair.
Built for drivers looking for a Nissan Juke brake kit with OE-style fitment, corrosion protection, and quieter operation, this package is organized to simplify brake service on the 2014, 2015, 2016, and 2017 Juke.
Key Features
- Fits 2014-2017 Nissan Juke, front and rear
- DFC GEOSPEC coated rotors with a silver-gray anti-rust finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Premium rubber-steel-rubber shims for improved NVH control
- Non-directional rotor finish for more even pad bed-in
- Dry-processed rotors ready for installation
- Part number 4514-67033 for easy identification
Product Line Details
The DFC GEOSPEC rotor line is designed with corrosion resistance in mind and uses a coated surface that is ready to install without additional cleaning. The 5000 Advanced pad line is formulated for stable friction performance and reduced initial break-in effort, while the included hardware is engineered to OE-style form, fit, and function.
Detailed Description
This DFC brake kit is designed for the Nissan Juke and combines rotors, pads, and hardware into one service package. The rotors are made to G3000/G11H18 cast iron specifications, machined to tight tolerances, and inspected for balance and critical dimensions. The pads are post cured, scorched, and assembled with premium shims to help reduce noise and vibration. Part number 4514-67033 is a practical choice for a full brake refresh on the 2014-2017 Nissan Juke.
What It Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or stressed hardware
- Rust buildup on exposed rotor surfaces
- Longer stopping response from worn friction components
- Vibration or harshness during braking
Installation Notes and Tips
Compatible With 2014-2017 Nissan Juke, front and rear. Before installation, inspect calipers, slides, and brake fluid condition, and verify rotor orientation and pad seating surfaces are clean. The coated rotor surface is intended to be installed dry and the coating will wear away in the pad contact area during normal use. Part number 4514-67033 should be matched to the vehicle’s axle position and brake service requirements before assembly.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected after machining, and vented rotors are balance-checked and corrected when needed. The rotors carry a 12-month warranty against defects in material and workmanship. DFC’s brake pad and hardware components are built to OE-style standards for consistent service results on the Nissan Juke.
Brake Kit for Nissan Juke Front and Rear
DFC Friction part number 4514-67033 is a complete disc brake kit for the 2014-2017 Nissan Juke, covering front and rear service. It combines DFC GEOSPEC coated rotors, 5000 Advanced ceramic brake pads, and matching hardware for a coordinated brake repair.
Built for drivers looking for a Nissan Juke brake kit with OE-style fitment, corrosion protection, and quieter operation, this package is organized to simplify brake service on the 2014, 2015, 2016, and 2017 Juke.
Key Features
- Fits 2014-2017 Nissan Juke, front and rear
- DFC GEOSPEC coated rotors with a silver-gray anti-rust finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Premium rubber-steel-rubber shims for improved NVH control
- Non-directional rotor finish for more even pad bed-in
- Dry-processed rotors ready for installation
- Part number 4514-67033 for easy identification
Product Line Details
The DFC GEOSPEC rotor line is designed with corrosion resistance in mind and uses a coated surface that is ready to install without additional cleaning. The 5000 Advanced pad line is formulated for stable friction performance and reduced initial break-in effort, while the included hardware is engineered to OE-style form, fit, and function.
Detailed Description
This DFC brake kit is designed for the Nissan Juke and combines rotors, pads, and hardware into one service package. The rotors are made to G3000/G11H18 cast iron specifications, machined to tight tolerances, and inspected for balance and critical dimensions. The pads are post cured, scorched, and assembled with premium shims to help reduce noise and vibration. Part number 4514-67033 is a practical choice for a full brake refresh on the 2014-2017 Nissan Juke.
What It Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or stressed hardware
- Rust buildup on exposed rotor surfaces
- Longer stopping response from worn friction components
- Vibration or harshness during braking
Installation Notes and Tips
Compatible With 2014-2017 Nissan Juke, front and rear. Before installation, inspect calipers, slides, and brake fluid condition, and verify rotor orientation and pad seating surfaces are clean. The coated rotor surface is intended to be installed dry and the coating will wear away in the pad contact area during normal use. Part number 4514-67033 should be matched to the vehicle’s axle position and brake service requirements before assembly.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected after machining, and vented rotors are balance-checked and corrected when needed. The rotors carry a 12-month warranty against defects in material and workmanship. DFC’s brake pad and hardware components are built to OE-style standards for consistent service results on the Nissan Juke.
Original: $360.61
-65%$360.61
$126.21Description
Brake Kit for Nissan Juke Front and Rear
DFC Friction part number 4514-67033 is a complete disc brake kit for the 2014-2017 Nissan Juke, covering front and rear service. It combines DFC GEOSPEC coated rotors, 5000 Advanced ceramic brake pads, and matching hardware for a coordinated brake repair.
Built for drivers looking for a Nissan Juke brake kit with OE-style fitment, corrosion protection, and quieter operation, this package is organized to simplify brake service on the 2014, 2015, 2016, and 2017 Juke.
Key Features
- Fits 2014-2017 Nissan Juke, front and rear
- DFC GEOSPEC coated rotors with a silver-gray anti-rust finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Premium rubber-steel-rubber shims for improved NVH control
- Non-directional rotor finish for more even pad bed-in
- Dry-processed rotors ready for installation
- Part number 4514-67033 for easy identification
Product Line Details
The DFC GEOSPEC rotor line is designed with corrosion resistance in mind and uses a coated surface that is ready to install without additional cleaning. The 5000 Advanced pad line is formulated for stable friction performance and reduced initial break-in effort, while the included hardware is engineered to OE-style form, fit, and function.
Detailed Description
This DFC brake kit is designed for the Nissan Juke and combines rotors, pads, and hardware into one service package. The rotors are made to G3000/G11H18 cast iron specifications, machined to tight tolerances, and inspected for balance and critical dimensions. The pads are post cured, scorched, and assembled with premium shims to help reduce noise and vibration. Part number 4514-67033 is a practical choice for a full brake refresh on the 2014-2017 Nissan Juke.
What It Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or stressed hardware
- Rust buildup on exposed rotor surfaces
- Longer stopping response from worn friction components
- Vibration or harshness during braking
Installation Notes and Tips
Compatible With 2014-2017 Nissan Juke, front and rear. Before installation, inspect calipers, slides, and brake fluid condition, and verify rotor orientation and pad seating surfaces are clean. The coated rotor surface is intended to be installed dry and the coating will wear away in the pad contact area during normal use. Part number 4514-67033 should be matched to the vehicle’s axle position and brake service requirements before assembly.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected after machining, and vented rotors are balance-checked and corrected when needed. The rotors carry a 12-month warranty against defects in material and workmanship. DFC’s brake pad and hardware components are built to OE-style standards for consistent service results on the Nissan Juke.
