Dynamite Friction 4514-67032 Disc Brake Kit - Front and Rear
Brake Kit for 2007-2012 Nissan Sentra
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for front and rear brake service on the 2007-2012 Nissan Sentra. Part number 4514-67032 combines coated rotors, ceramic pads, and matching hardware for a complete brake job in one package.
Key Features
- Fits 2007-2012 Nissan Sentra, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Non-directional rotor finish for more even pad bed-in and smoother stops
- Part number 4514-67032
Product Details
DFC GEOSPEC coated rotors are machined to OE-style tolerances and processed dry, so they are ready to install without extra cleaning. The coating is designed to resist rust better than conventional paint or zinc finishes, while the G3000/G11H18 cast iron construction supports durability and stable braking performance. The 5000 Advanced brake pads are formulated for consistent friction, and the included hardware is designed to restore proper spring tension and caliper movement during brake service. This makes 4514-67032 a practical choice for a Nissan Sentra brake rotor and pad kit when replacing worn components on both axles.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Reduced stopping performance from worn rotors and pads
- Rotor rust and surface corrosion
- Brake pulsation or rough braking feel
Installation Notes
Inspect calipers, slides, and brake fluid condition before installation. Clean the hub mounting surface thoroughly so the coated rotors seat correctly. Follow the vehicle manufacturer’s torque specifications and perform a proper pad bed-in procedure after installation. Part number 4514-67032 is intended for front and rear brake service on the listed Nissan Sentra applications.
Quality Assurance
DFC rotors are 100% inspected for critical dimensions and balance, and each rotor includes a 12-month warranty against defects in material and workmanship. The brake pads are post cured and scorched for stable friction performance, and the hardware kit is engineered to OE-style form, fit, and function.
Brake Kit for 2007-2012 Nissan Sentra
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for front and rear brake service on the 2007-2012 Nissan Sentra. Part number 4514-67032 combines coated rotors, ceramic pads, and matching hardware for a complete brake job in one package.
Key Features
- Fits 2007-2012 Nissan Sentra, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Non-directional rotor finish for more even pad bed-in and smoother stops
- Part number 4514-67032
Product Details
DFC GEOSPEC coated rotors are machined to OE-style tolerances and processed dry, so they are ready to install without extra cleaning. The coating is designed to resist rust better than conventional paint or zinc finishes, while the G3000/G11H18 cast iron construction supports durability and stable braking performance. The 5000 Advanced brake pads are formulated for consistent friction, and the included hardware is designed to restore proper spring tension and caliper movement during brake service. This makes 4514-67032 a practical choice for a Nissan Sentra brake rotor and pad kit when replacing worn components on both axles.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Reduced stopping performance from worn rotors and pads
- Rotor rust and surface corrosion
- Brake pulsation or rough braking feel
Installation Notes
Inspect calipers, slides, and brake fluid condition before installation. Clean the hub mounting surface thoroughly so the coated rotors seat correctly. Follow the vehicle manufacturer’s torque specifications and perform a proper pad bed-in procedure after installation. Part number 4514-67032 is intended for front and rear brake service on the listed Nissan Sentra applications.
Quality Assurance
DFC rotors are 100% inspected for critical dimensions and balance, and each rotor includes a 12-month warranty against defects in material and workmanship. The brake pads are post cured and scorched for stable friction performance, and the hardware kit is engineered to OE-style form, fit, and function.
Original: $352.59
-65%$352.59
$123.41Description
Brake Kit for 2007-2012 Nissan Sentra
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for front and rear brake service on the 2007-2012 Nissan Sentra. Part number 4514-67032 combines coated rotors, ceramic pads, and matching hardware for a complete brake job in one package.
Key Features
- Fits 2007-2012 Nissan Sentra, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Non-directional rotor finish for more even pad bed-in and smoother stops
- Part number 4514-67032
Product Details
DFC GEOSPEC coated rotors are machined to OE-style tolerances and processed dry, so they are ready to install without extra cleaning. The coating is designed to resist rust better than conventional paint or zinc finishes, while the G3000/G11H18 cast iron construction supports durability and stable braking performance. The 5000 Advanced brake pads are formulated for consistent friction, and the included hardware is designed to restore proper spring tension and caliper movement during brake service. This makes 4514-67032 a practical choice for a Nissan Sentra brake rotor and pad kit when replacing worn components on both axles.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Reduced stopping performance from worn rotors and pads
- Rotor rust and surface corrosion
- Brake pulsation or rough braking feel
Installation Notes
Inspect calipers, slides, and brake fluid condition before installation. Clean the hub mounting surface thoroughly so the coated rotors seat correctly. Follow the vehicle manufacturer’s torque specifications and perform a proper pad bed-in procedure after installation. Part number 4514-67032 is intended for front and rear brake service on the listed Nissan Sentra applications.
Quality Assurance
DFC rotors are 100% inspected for critical dimensions and balance, and each rotor includes a 12-month warranty against defects in material and workmanship. The brake pads are post cured and scorched for stable friction performance, and the hardware kit is engineered to OE-style form, fit, and function.
