Dynamite Friction 4514-67023 Disc Brake Kit - Front and Rear
Brake Kit for Frontier, Xterra, and Equator
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a complete disc brake service kit for select Nissan Frontier, Nissan Xterra, and Suzuki Equator applications. Part number 4514-67023 combines coated rotors, ceramic brake pads, and matching hardware in one package for front and rear brake service.
Key Features
- Complete disc brake kit with rotors, 5000 Advanced ceramic pads, and hardware
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-to-install rotor coating reduces prep time during brake service
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 100% post-cured brake pads for stable friction performance
- Scorched pad surface helps reduce initial break-in time
- Rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware uses PTFE coating, vulcanized rubber, and stainless steel construction
Product Details
DFC 5000 Advanced Brake Pads are formulated for modern vehicle braking demands and are built with consistent friction characteristics across the axle. The pads are post cured, then scorched to remove uncured bonding agents, which helps deliver more immediate stopping response after installation. DFC also uses premium rubber-steel-rubber shims to improve NVH control for quieter operation.
The GEOSPEC coated rotors are made to OE-style G3000/G11H18 cast iron specifications and machined to tight tolerances. Each rotor is processed dry and shipped dry, so there is no oil coating to clean before installation. The non-directional finish promotes faster, more even pad bedding, while balance inspection on vented rotors helps support smooth operation. Part number 4514-67023 is a practical choice for Nissan Frontier brake replacement, Nissan Xterra brake service, and Suzuki Equator front and rear brake maintenance.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake noise from worn hardware or pad shims
- Uneven pad wear caused by fatigued or corroded hardware
- Longer stopping response from worn brake pads
- Rotor rust buildup on exposed braking surfaces
- Brake vibration related to rotor finish or balance issues
Installation Notes
Compatible With 2021-2026 Nissan Frontier, front and rear; 2005-2020 Nissan Frontier, front and rear; 2005-2015 Nissan Xterra, front and rear; and 2009-2012 Suzuki Equator, front and rear. For best results, replace rotors, pads, and hardware together during a full brake service. Clean the rotor friction surfaces before assembly if needed, and follow the vehicle manufacturer’s bedding procedure after installation.
Quality Assurance
DFC GEOSPEC rotors are backed by a 12-month warranty against defects in material and workmanship. The rotors also undergo 100% inspection for critical dimensions, and the brake pads are produced with post-curing and scorching steps to support consistent friction performance.
Brake Kit for Frontier, Xterra, and Equator
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a complete disc brake service kit for select Nissan Frontier, Nissan Xterra, and Suzuki Equator applications. Part number 4514-67023 combines coated rotors, ceramic brake pads, and matching hardware in one package for front and rear brake service.
Key Features
- Complete disc brake kit with rotors, 5000 Advanced ceramic pads, and hardware
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-to-install rotor coating reduces prep time during brake service
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 100% post-cured brake pads for stable friction performance
- Scorched pad surface helps reduce initial break-in time
- Rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware uses PTFE coating, vulcanized rubber, and stainless steel construction
Product Details
DFC 5000 Advanced Brake Pads are formulated for modern vehicle braking demands and are built with consistent friction characteristics across the axle. The pads are post cured, then scorched to remove uncured bonding agents, which helps deliver more immediate stopping response after installation. DFC also uses premium rubber-steel-rubber shims to improve NVH control for quieter operation.
The GEOSPEC coated rotors are made to OE-style G3000/G11H18 cast iron specifications and machined to tight tolerances. Each rotor is processed dry and shipped dry, so there is no oil coating to clean before installation. The non-directional finish promotes faster, more even pad bedding, while balance inspection on vented rotors helps support smooth operation. Part number 4514-67023 is a practical choice for Nissan Frontier brake replacement, Nissan Xterra brake service, and Suzuki Equator front and rear brake maintenance.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake noise from worn hardware or pad shims
- Uneven pad wear caused by fatigued or corroded hardware
- Longer stopping response from worn brake pads
- Rotor rust buildup on exposed braking surfaces
- Brake vibration related to rotor finish or balance issues
Installation Notes
Compatible With 2021-2026 Nissan Frontier, front and rear; 2005-2020 Nissan Frontier, front and rear; 2005-2015 Nissan Xterra, front and rear; and 2009-2012 Suzuki Equator, front and rear. For best results, replace rotors, pads, and hardware together during a full brake service. Clean the rotor friction surfaces before assembly if needed, and follow the vehicle manufacturer’s bedding procedure after installation.
Quality Assurance
DFC GEOSPEC rotors are backed by a 12-month warranty against defects in material and workmanship. The rotors also undergo 100% inspection for critical dimensions, and the brake pads are produced with post-curing and scorching steps to support consistent friction performance.
Original: $333.27
-65%$333.27
$116.64Description
Brake Kit for Frontier, Xterra, and Equator
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a complete disc brake service kit for select Nissan Frontier, Nissan Xterra, and Suzuki Equator applications. Part number 4514-67023 combines coated rotors, ceramic brake pads, and matching hardware in one package for front and rear brake service.
Key Features
- Complete disc brake kit with rotors, 5000 Advanced ceramic pads, and hardware
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-to-install rotor coating reduces prep time during brake service
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 100% post-cured brake pads for stable friction performance
- Scorched pad surface helps reduce initial break-in time
- Rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware uses PTFE coating, vulcanized rubber, and stainless steel construction
Product Details
DFC 5000 Advanced Brake Pads are formulated for modern vehicle braking demands and are built with consistent friction characteristics across the axle. The pads are post cured, then scorched to remove uncured bonding agents, which helps deliver more immediate stopping response after installation. DFC also uses premium rubber-steel-rubber shims to improve NVH control for quieter operation.
The GEOSPEC coated rotors are made to OE-style G3000/G11H18 cast iron specifications and machined to tight tolerances. Each rotor is processed dry and shipped dry, so there is no oil coating to clean before installation. The non-directional finish promotes faster, more even pad bedding, while balance inspection on vented rotors helps support smooth operation. Part number 4514-67023 is a practical choice for Nissan Frontier brake replacement, Nissan Xterra brake service, and Suzuki Equator front and rear brake maintenance.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake noise from worn hardware or pad shims
- Uneven pad wear caused by fatigued or corroded hardware
- Longer stopping response from worn brake pads
- Rotor rust buildup on exposed braking surfaces
- Brake vibration related to rotor finish or balance issues
Installation Notes
Compatible With 2021-2026 Nissan Frontier, front and rear; 2005-2020 Nissan Frontier, front and rear; 2005-2015 Nissan Xterra, front and rear; and 2009-2012 Suzuki Equator, front and rear. For best results, replace rotors, pads, and hardware together during a full brake service. Clean the rotor friction surfaces before assembly if needed, and follow the vehicle manufacturer’s bedding procedure after installation.
Quality Assurance
DFC GEOSPEC rotors are backed by a 12-month warranty against defects in material and workmanship. The rotors also undergo 100% inspection for critical dimensions, and the brake pads are produced with post-curing and scorching steps to support consistent friction performance.
