Dynamite Friction 4514-65013 Disc Brake Kit - Front and Rear
Brake Kit for Saab 9-3 and Cadillac BLS
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a complete disc brake service solution for select Saab and Cadillac applications. Part number 4514-65013 combines coated rotors, ceramic brake pads, and matching hardware for a front and rear brake refresh.
Compatible With 2006-2011 Saab 9-3 and 2007-2008 Cadillac BLS applications with the listed 314mm front rotor configuration, this kit is built for drivers replacing worn brake components on the same vehicle platforms.
Key Features
- Complete disc brake kit with rotors, pads, and hardware
- DFC 5000 Advanced ceramic pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed, dry-shipped rotors ready for installation
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware is engineered as a matched brake service package for OE-style replacement. The rotors are cast to G3000/G11H18 specifications, machined to tight tolerances, and inspected for balance and critical dimensions. The coated surface helps resist rust better than conventional paint or zinc finishes, while the non-directional finish supports quieter stops and consistent pad contact. The 5000 Advanced pads are formulated for stable friction performance and reduced break-in time, making this a practical choice for a full brake job on Saab 9-3 and Cadillac BLS models.
This part number, 4514-65013, is also a useful reference when sourcing a complete front and rear brake kit for the listed vehicles. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues It Can Address
- Brake noise from worn pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven braking feel from worn or out-of-spec rotors
- Reduced stopping performance from aged friction material
- Excessive caliper movement caused by worn hardware components
Installation Notes and Tips
Verify rotor size and brake configuration before ordering, especially on Saab 9-3 and Cadillac BLS vehicles with the listed 314mm front rotor setup. The rotors are shipped dry and ready to install, so no oil removal or extra prep is required. For best results, inspect caliper condition, clean mounting surfaces, and follow the vehicle manufacturer’s brake service procedure during installation.
Quality Assurance
Each rotor is 100% inspected after machining to confirm critical dimensions and OE-spec compliance. Vented rotors are electronically mill-balanced when needed, and the kit includes a 12-month warranty against defects in material and workmanship on the rotors. Part number 4514-65013 is built to deliver a complete, application-specific brake service package for the listed Saab and Cadillac fitments.
Brake Kit for Saab 9-3 and Cadillac BLS
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a complete disc brake service solution for select Saab and Cadillac applications. Part number 4514-65013 combines coated rotors, ceramic brake pads, and matching hardware for a front and rear brake refresh.
Compatible With 2006-2011 Saab 9-3 and 2007-2008 Cadillac BLS applications with the listed 314mm front rotor configuration, this kit is built for drivers replacing worn brake components on the same vehicle platforms.
Key Features
- Complete disc brake kit with rotors, pads, and hardware
- DFC 5000 Advanced ceramic pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed, dry-shipped rotors ready for installation
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware is engineered as a matched brake service package for OE-style replacement. The rotors are cast to G3000/G11H18 specifications, machined to tight tolerances, and inspected for balance and critical dimensions. The coated surface helps resist rust better than conventional paint or zinc finishes, while the non-directional finish supports quieter stops and consistent pad contact. The 5000 Advanced pads are formulated for stable friction performance and reduced break-in time, making this a practical choice for a full brake job on Saab 9-3 and Cadillac BLS models.
This part number, 4514-65013, is also a useful reference when sourcing a complete front and rear brake kit for the listed vehicles. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues It Can Address
- Brake noise from worn pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven braking feel from worn or out-of-spec rotors
- Reduced stopping performance from aged friction material
- Excessive caliper movement caused by worn hardware components
Installation Notes and Tips
Verify rotor size and brake configuration before ordering, especially on Saab 9-3 and Cadillac BLS vehicles with the listed 314mm front rotor setup. The rotors are shipped dry and ready to install, so no oil removal or extra prep is required. For best results, inspect caliper condition, clean mounting surfaces, and follow the vehicle manufacturer’s brake service procedure during installation.
Quality Assurance
Each rotor is 100% inspected after machining to confirm critical dimensions and OE-spec compliance. Vented rotors are electronically mill-balanced when needed, and the kit includes a 12-month warranty against defects in material and workmanship on the rotors. Part number 4514-65013 is built to deliver a complete, application-specific brake service package for the listed Saab and Cadillac fitments.
Original: $381.52
-65%$381.52
$133.53Description
Brake Kit for Saab 9-3 and Cadillac BLS
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a complete disc brake service solution for select Saab and Cadillac applications. Part number 4514-65013 combines coated rotors, ceramic brake pads, and matching hardware for a front and rear brake refresh.
Compatible With 2006-2011 Saab 9-3 and 2007-2008 Cadillac BLS applications with the listed 314mm front rotor configuration, this kit is built for drivers replacing worn brake components on the same vehicle platforms.
Key Features
- Complete disc brake kit with rotors, pads, and hardware
- DFC 5000 Advanced ceramic pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed, dry-shipped rotors ready for installation
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware is engineered as a matched brake service package for OE-style replacement. The rotors are cast to G3000/G11H18 specifications, machined to tight tolerances, and inspected for balance and critical dimensions. The coated surface helps resist rust better than conventional paint or zinc finishes, while the non-directional finish supports quieter stops and consistent pad contact. The 5000 Advanced pads are formulated for stable friction performance and reduced break-in time, making this a practical choice for a full brake job on Saab 9-3 and Cadillac BLS models.
This part number, 4514-65013, is also a useful reference when sourcing a complete front and rear brake kit for the listed vehicles. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues It Can Address
- Brake noise from worn pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven braking feel from worn or out-of-spec rotors
- Reduced stopping performance from aged friction material
- Excessive caliper movement caused by worn hardware components
Installation Notes and Tips
Verify rotor size and brake configuration before ordering, especially on Saab 9-3 and Cadillac BLS vehicles with the listed 314mm front rotor setup. The rotors are shipped dry and ready to install, so no oil removal or extra prep is required. For best results, inspect caliper condition, clean mounting surfaces, and follow the vehicle manufacturer’s brake service procedure during installation.
Quality Assurance
Each rotor is 100% inspected after machining to confirm critical dimensions and OE-spec compliance. Vented rotors are electronically mill-balanced when needed, and the kit includes a 12-month warranty against defects in material and workmanship on the rotors. Part number 4514-65013 is built to deliver a complete, application-specific brake service package for the listed Saab and Cadillac fitments.
