Dynamite Friction 4514-65008 Disc Brake Kit - Front and Rear
Brake Kit for Saab 9-3 and Cadillac BLS
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a front and rear disc brake kit built for OE-style service replacement. Part number 4514-65008 combines coated rotors, low metallic pads, and brake hardware for select Saab 9-3 and Cadillac BLS applications.
This kit is organized for drivers servicing a 2006-2011 Saab 9-3 or 2007-2008 Cadillac BLS brake system and looking for a complete rotor-and-pad solution in one package. The DFC GEOSPEC rotor finish helps resist rust, while the 5000 Advanced pads use a low metallic friction formula with shims for quieter operation.
Key Features
- Part number 4514-65008 disc brake kit for front and rear service
- Compatible with select 2006-2011 Saab 9-3 and 2007-2008 Cadillac BLS applications
- GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in and smoother stops
- 5000 Advanced low metallic brake pads with post-cured friction material
- Premium rubber-steel-rubber shims help reduce noise and vibration
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC built this brake service kit around matched components for consistent braking performance. The rotors are cast to OEM-style G3000/G11H18 specifications, machined to tight tolerances, and inspected for balance and critical dimensions. The pads are scorched to remove uncured bonding agents, which helps reduce initial break-in time and supports stable friction from the first stop. For Saab 9-3 and Cadillac BLS owners, part number 4514-65008 provides a direct-fit service option for front and rear brake maintenance.
Common Brake Issues This Kit Addresses
- Brake noise from worn or corroded hardware
- Uneven pad wear caused by fatigued caliper hardware
- Rotor rust and surface corrosion
- Vibration or harshness during braking
- Reduced stopping consistency from worn pads and rotors
Installation Notes
Verify rotor size and brake configuration before ordering: 2010-2011 Saab 9-3 without Performance Package uses 285mm front and 278mm rear rotors; 2006-2007 Saab 9-3 uses 285mm front rotors and solid rear rotors; 2007-2008 Cadillac BLS uses a 285mm front disc. Clean all mating surfaces, inspect caliper slides, and follow the vehicle service manual for torque and bedding procedures.
Quality Assurance
Each DFC GEOSPEC coated rotor is inspected for critical dimensions and balance, and the rotors carry a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and assembled with noise-reducing shims to support consistent brake service quality.
Brake Kit for Saab 9-3 and Cadillac BLS
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a front and rear disc brake kit built for OE-style service replacement. Part number 4514-65008 combines coated rotors, low metallic pads, and brake hardware for select Saab 9-3 and Cadillac BLS applications.
This kit is organized for drivers servicing a 2006-2011 Saab 9-3 or 2007-2008 Cadillac BLS brake system and looking for a complete rotor-and-pad solution in one package. The DFC GEOSPEC rotor finish helps resist rust, while the 5000 Advanced pads use a low metallic friction formula with shims for quieter operation.
Key Features
- Part number 4514-65008 disc brake kit for front and rear service
- Compatible with select 2006-2011 Saab 9-3 and 2007-2008 Cadillac BLS applications
- GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in and smoother stops
- 5000 Advanced low metallic brake pads with post-cured friction material
- Premium rubber-steel-rubber shims help reduce noise and vibration
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC built this brake service kit around matched components for consistent braking performance. The rotors are cast to OEM-style G3000/G11H18 specifications, machined to tight tolerances, and inspected for balance and critical dimensions. The pads are scorched to remove uncured bonding agents, which helps reduce initial break-in time and supports stable friction from the first stop. For Saab 9-3 and Cadillac BLS owners, part number 4514-65008 provides a direct-fit service option for front and rear brake maintenance.
Common Brake Issues This Kit Addresses
- Brake noise from worn or corroded hardware
- Uneven pad wear caused by fatigued caliper hardware
- Rotor rust and surface corrosion
- Vibration or harshness during braking
- Reduced stopping consistency from worn pads and rotors
Installation Notes
Verify rotor size and brake configuration before ordering: 2010-2011 Saab 9-3 without Performance Package uses 285mm front and 278mm rear rotors; 2006-2007 Saab 9-3 uses 285mm front rotors and solid rear rotors; 2007-2008 Cadillac BLS uses a 285mm front disc. Clean all mating surfaces, inspect caliper slides, and follow the vehicle service manual for torque and bedding procedures.
Quality Assurance
Each DFC GEOSPEC coated rotor is inspected for critical dimensions and balance, and the rotors carry a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and assembled with noise-reducing shims to support consistent brake service quality.
Original: $315.97
-65%$315.97
$110.59Description
Brake Kit for Saab 9-3 and Cadillac BLS
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a front and rear disc brake kit built for OE-style service replacement. Part number 4514-65008 combines coated rotors, low metallic pads, and brake hardware for select Saab 9-3 and Cadillac BLS applications.
This kit is organized for drivers servicing a 2006-2011 Saab 9-3 or 2007-2008 Cadillac BLS brake system and looking for a complete rotor-and-pad solution in one package. The DFC GEOSPEC rotor finish helps resist rust, while the 5000 Advanced pads use a low metallic friction formula with shims for quieter operation.
Key Features
- Part number 4514-65008 disc brake kit for front and rear service
- Compatible with select 2006-2011 Saab 9-3 and 2007-2008 Cadillac BLS applications
- GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in and smoother stops
- 5000 Advanced low metallic brake pads with post-cured friction material
- Premium rubber-steel-rubber shims help reduce noise and vibration
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC built this brake service kit around matched components for consistent braking performance. The rotors are cast to OEM-style G3000/G11H18 specifications, machined to tight tolerances, and inspected for balance and critical dimensions. The pads are scorched to remove uncured bonding agents, which helps reduce initial break-in time and supports stable friction from the first stop. For Saab 9-3 and Cadillac BLS owners, part number 4514-65008 provides a direct-fit service option for front and rear brake maintenance.
Common Brake Issues This Kit Addresses
- Brake noise from worn or corroded hardware
- Uneven pad wear caused by fatigued caliper hardware
- Rotor rust and surface corrosion
- Vibration or harshness during braking
- Reduced stopping consistency from worn pads and rotors
Installation Notes
Verify rotor size and brake configuration before ordering: 2010-2011 Saab 9-3 without Performance Package uses 285mm front and 278mm rear rotors; 2006-2007 Saab 9-3 uses 285mm front rotors and solid rear rotors; 2007-2008 Cadillac BLS uses a 285mm front disc. Clean all mating surfaces, inspect caliper slides, and follow the vehicle service manual for torque and bedding procedures.
Quality Assurance
Each DFC GEOSPEC coated rotor is inspected for critical dimensions and balance, and the rotors carry a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and assembled with noise-reducing shims to support consistent brake service quality.
