Dynamite Friction 4514-63098 Disc Brake Kit - Front and Rear
Brake Kit for 2019 Mercedes-Benz GLE400
This DFC brake kit combines GeoSpec coated rotors, 5000 Advanced brake pads, and matching hardware for the front and rear of the 2019 Mercedes-Benz GLE400. It is built for drivers looking for an OE-style brake service kit with direct-fit components and reduced prep time during installation.
Key Features
- Part number 4514-63098
- Fits 2019 Mercedes-Benz GLE400, front and rear
- DFC GeoSpec coated rotors with a silver-gray corrosion-resistant finish
- Rotors ship dry and are ready to install without oil removal
- 5000 Advanced pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
The DFC Geospec Rotors with 5000 Advanced Brake Pads includes Hardware line is engineered as a complete brake service solution for vehicles that need consistent stopping performance and OE-style fitment. The rotors are cast to G3000/G11H18 specifications, machined to tight tolerances, and finished with a non-directional surface to support even pad bed-in and smoother braking. The pads are formulated for stable friction output, while the hardware is designed to address worn or fatigued brake clips and springs that can contribute to noise and uneven wear. Part number 4514-63098 is a practical choice for a 2019 Mercedes-Benz GLE400 brake job when replacing rotors, pads, and hardware together.
What This Brake Kit Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weak hardware
- Reduced braking consistency from worn rotors
- Longer service time from rotors that require extra prep before installation
- Vibration or harshness during normal braking
Installation Notes
Compatible With 2019 Mercedes-Benz GLE400, front and rear. Inspect calipers, slides, and mounting surfaces before installation, and follow the vehicle service procedure for pad bedding after the brake job. The dry rotor finish is intended to reduce prep work, but all friction surfaces should still be handled cleanly during assembly. Verify axle position and brake hardware condition before beginning service.
Quality Assurance
DFC states that the rotors are 100% inspected for critical dimensions and balance, and the brake pads are post-cured and scorched to support stable friction performance from the first stop. The GeoSpec rotors carry a 12-month warranty against defects in material and workmanship. Part number 4514-63098 is built to OE-style specifications for a direct replacement brake service on the Mercedes-Benz GLE400.
Brake Kit for 2019 Mercedes-Benz GLE400
This DFC brake kit combines GeoSpec coated rotors, 5000 Advanced brake pads, and matching hardware for the front and rear of the 2019 Mercedes-Benz GLE400. It is built for drivers looking for an OE-style brake service kit with direct-fit components and reduced prep time during installation.
Key Features
- Part number 4514-63098
- Fits 2019 Mercedes-Benz GLE400, front and rear
- DFC GeoSpec coated rotors with a silver-gray corrosion-resistant finish
- Rotors ship dry and are ready to install without oil removal
- 5000 Advanced pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
The DFC Geospec Rotors with 5000 Advanced Brake Pads includes Hardware line is engineered as a complete brake service solution for vehicles that need consistent stopping performance and OE-style fitment. The rotors are cast to G3000/G11H18 specifications, machined to tight tolerances, and finished with a non-directional surface to support even pad bed-in and smoother braking. The pads are formulated for stable friction output, while the hardware is designed to address worn or fatigued brake clips and springs that can contribute to noise and uneven wear. Part number 4514-63098 is a practical choice for a 2019 Mercedes-Benz GLE400 brake job when replacing rotors, pads, and hardware together.
What This Brake Kit Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weak hardware
- Reduced braking consistency from worn rotors
- Longer service time from rotors that require extra prep before installation
- Vibration or harshness during normal braking
Installation Notes
Compatible With 2019 Mercedes-Benz GLE400, front and rear. Inspect calipers, slides, and mounting surfaces before installation, and follow the vehicle service procedure for pad bedding after the brake job. The dry rotor finish is intended to reduce prep work, but all friction surfaces should still be handled cleanly during assembly. Verify axle position and brake hardware condition before beginning service.
Quality Assurance
DFC states that the rotors are 100% inspected for critical dimensions and balance, and the brake pads are post-cured and scorched to support stable friction performance from the first stop. The GeoSpec rotors carry a 12-month warranty against defects in material and workmanship. Part number 4514-63098 is built to OE-style specifications for a direct replacement brake service on the Mercedes-Benz GLE400.
Original: $477.59
-65%$477.59
$167.16Description
Brake Kit for 2019 Mercedes-Benz GLE400
This DFC brake kit combines GeoSpec coated rotors, 5000 Advanced brake pads, and matching hardware for the front and rear of the 2019 Mercedes-Benz GLE400. It is built for drivers looking for an OE-style brake service kit with direct-fit components and reduced prep time during installation.
Key Features
- Part number 4514-63098
- Fits 2019 Mercedes-Benz GLE400, front and rear
- DFC GeoSpec coated rotors with a silver-gray corrosion-resistant finish
- Rotors ship dry and are ready to install without oil removal
- 5000 Advanced pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
The DFC Geospec Rotors with 5000 Advanced Brake Pads includes Hardware line is engineered as a complete brake service solution for vehicles that need consistent stopping performance and OE-style fitment. The rotors are cast to G3000/G11H18 specifications, machined to tight tolerances, and finished with a non-directional surface to support even pad bed-in and smoother braking. The pads are formulated for stable friction output, while the hardware is designed to address worn or fatigued brake clips and springs that can contribute to noise and uneven wear. Part number 4514-63098 is a practical choice for a 2019 Mercedes-Benz GLE400 brake job when replacing rotors, pads, and hardware together.
What This Brake Kit Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weak hardware
- Reduced braking consistency from worn rotors
- Longer service time from rotors that require extra prep before installation
- Vibration or harshness during normal braking
Installation Notes
Compatible With 2019 Mercedes-Benz GLE400, front and rear. Inspect calipers, slides, and mounting surfaces before installation, and follow the vehicle service procedure for pad bedding after the brake job. The dry rotor finish is intended to reduce prep work, but all friction surfaces should still be handled cleanly during assembly. Verify axle position and brake hardware condition before beginning service.
Quality Assurance
DFC states that the rotors are 100% inspected for critical dimensions and balance, and the brake pads are post-cured and scorched to support stable friction performance from the first stop. The GeoSpec rotors carry a 12-month warranty against defects in material and workmanship. Part number 4514-63098 is built to OE-style specifications for a direct replacement brake service on the Mercedes-Benz GLE400.
