Dynamite Friction 4514-63069 Disc Brake Kit - Front and Rear
Brake Kit for Mercedes-Benz SLK250
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Low Metallic and Hardware Kit is a complete disc brake kit for the front and rear of select Mercedes-Benz SLK250 models. Part number 4514-63069 is built for 2012-2015 Mercedes-Benz SLK250 applications without the Sport Package, combining coated rotors, low metallic pads, and matching brake hardware in one service package.
- Fits 2012-2015 Mercedes-Benz SLK250, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors ship dry and are ready to install
- Non-directional rotor finish supports even pad bed-in and quieter stops
- DFC 5000 Advanced low metallic brake pads with post-cured friction material
- Scorched pads help reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Brake hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number: 4514-63069
Product Line Details
DFC GEOSPEC coated rotors are machined to tight tolerances and built to OE specifications using G3000/G11H18 cast iron. The coating is designed to resist rust better than conventional paint or zinc finishes, while the dry-ready surface eliminates the need to clean oil from the rotor before installation. The DFC 5000 Advanced pad formulation is developed for modern vehicle braking demands and is assembled with shims that help reduce noise, vibration, and harshness. The included hardware kit is engineered to restore proper spring tension and caliper movement where worn or corroded hardware has affected braking performance.
What This Brake Kit Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weak hardware
- Rust buildup on exposed rotor surfaces
- Longer stopping response from aged friction material
- Vibration or harshness during braking
Installation Notes and Tips
Compatible With 2012-2015 Mercedes-Benz SLK250 front and rear brake service on vehicles without the Sport Package. Before installation, confirm rotor size, caliper clearance, and axle position against the vehicle build data. Because the rotors are shipped dry, no oil removal step is needed before assembly. For best results, follow the pad bed-in procedure after installation to help establish even transfer on the rotor surface.
Quality Assurance
Each DFC GEOSPEC rotor is inspected for critical dimensions and balance, with vented rotors electronically mill-balanced when required. The rotors carry a 12-month warranty against defects in material and workmanship. Part number 4514-63069 is designed to meet OE-style expectations for fit, finish, and braking consistency.
Brake Kit for Mercedes-Benz SLK250
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Low Metallic and Hardware Kit is a complete disc brake kit for the front and rear of select Mercedes-Benz SLK250 models. Part number 4514-63069 is built for 2012-2015 Mercedes-Benz SLK250 applications without the Sport Package, combining coated rotors, low metallic pads, and matching brake hardware in one service package.
- Fits 2012-2015 Mercedes-Benz SLK250, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors ship dry and are ready to install
- Non-directional rotor finish supports even pad bed-in and quieter stops
- DFC 5000 Advanced low metallic brake pads with post-cured friction material
- Scorched pads help reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Brake hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number: 4514-63069
Product Line Details
DFC GEOSPEC coated rotors are machined to tight tolerances and built to OE specifications using G3000/G11H18 cast iron. The coating is designed to resist rust better than conventional paint or zinc finishes, while the dry-ready surface eliminates the need to clean oil from the rotor before installation. The DFC 5000 Advanced pad formulation is developed for modern vehicle braking demands and is assembled with shims that help reduce noise, vibration, and harshness. The included hardware kit is engineered to restore proper spring tension and caliper movement where worn or corroded hardware has affected braking performance.
What This Brake Kit Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weak hardware
- Rust buildup on exposed rotor surfaces
- Longer stopping response from aged friction material
- Vibration or harshness during braking
Installation Notes and Tips
Compatible With 2012-2015 Mercedes-Benz SLK250 front and rear brake service on vehicles without the Sport Package. Before installation, confirm rotor size, caliper clearance, and axle position against the vehicle build data. Because the rotors are shipped dry, no oil removal step is needed before assembly. For best results, follow the pad bed-in procedure after installation to help establish even transfer on the rotor surface.
Quality Assurance
Each DFC GEOSPEC rotor is inspected for critical dimensions and balance, with vented rotors electronically mill-balanced when required. The rotors carry a 12-month warranty against defects in material and workmanship. Part number 4514-63069 is designed to meet OE-style expectations for fit, finish, and braking consistency.
Description
Brake Kit for Mercedes-Benz SLK250
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Low Metallic and Hardware Kit is a complete disc brake kit for the front and rear of select Mercedes-Benz SLK250 models. Part number 4514-63069 is built for 2012-2015 Mercedes-Benz SLK250 applications without the Sport Package, combining coated rotors, low metallic pads, and matching brake hardware in one service package.
- Fits 2012-2015 Mercedes-Benz SLK250, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors ship dry and are ready to install
- Non-directional rotor finish supports even pad bed-in and quieter stops
- DFC 5000 Advanced low metallic brake pads with post-cured friction material
- Scorched pads help reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Brake hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number: 4514-63069
Product Line Details
DFC GEOSPEC coated rotors are machined to tight tolerances and built to OE specifications using G3000/G11H18 cast iron. The coating is designed to resist rust better than conventional paint or zinc finishes, while the dry-ready surface eliminates the need to clean oil from the rotor before installation. The DFC 5000 Advanced pad formulation is developed for modern vehicle braking demands and is assembled with shims that help reduce noise, vibration, and harshness. The included hardware kit is engineered to restore proper spring tension and caliper movement where worn or corroded hardware has affected braking performance.
What This Brake Kit Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weak hardware
- Rust buildup on exposed rotor surfaces
- Longer stopping response from aged friction material
- Vibration or harshness during braking
Installation Notes and Tips
Compatible With 2012-2015 Mercedes-Benz SLK250 front and rear brake service on vehicles without the Sport Package. Before installation, confirm rotor size, caliper clearance, and axle position against the vehicle build data. Because the rotors are shipped dry, no oil removal step is needed before assembly. For best results, follow the pad bed-in procedure after installation to help establish even transfer on the rotor surface.
Quality Assurance
Each DFC GEOSPEC rotor is inspected for critical dimensions and balance, with vented rotors electronically mill-balanced when required. The rotors carry a 12-month warranty against defects in material and workmanship. Part number 4514-63069 is designed to meet OE-style expectations for fit, finish, and braking consistency.
