Dynamite Friction 4514-63057 Disc Brake Kit - Front and Rear
Brake Kit for Mercedes-Benz GLC300
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for 2016-2018 Mercedes-Benz GLC300 front and rear brake service on vehicles without the Sport Package. Part number 4514-63057 combines coated rotors, ceramic pads, and brake hardware in one service kit for a complete brake refresh.
Key Features
- Fits 2016-2018 Mercedes-Benz GLC300, front and rear, without Sport Package
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Dry-processed rotors arrive ready to install
Product Details
Part number 4514-63057 is a complete disc brake kit for the Mercedes-Benz GLC300 that pairs DFC GEOSPEC coated rotors with DFC 5000 Advanced ceramic pads and matching hardware. The rotor design uses G3000/G11H18 cast iron and a non-directional finish to support even pad bedding and smoother braking. The coated surface helps resist rust better than conventional paint or zinc finishes, while the dry packaging avoids the need to clean oil from the rotor before installation. DFC’s 5000 Advanced pad line is formulated for stable friction performance and uses shims to help reduce brake noise.
Common Brake Service Problems This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Noise caused by fatigued or corroded brake hardware
- Reduced stopping performance from worn pads
- Rust buildup on exposed rotor surfaces
- Uneven pad wear from aged hardware components
Installation Notes and Tips
Verify that your vehicle is a 2016-2018 Mercedes-Benz GLC300 without the Sport Package before ordering. This kit is intended for front and rear brake service, so confirm axle coverage during inspection. Clean the hub mounting surface before rotor installation and follow proper bedding procedures after assembly to help the pads and rotors seat evenly. Part number 4514-63057 is designed for direct brake service on the listed application.
Quality Assurance
Each DFC GEOSPEC rotor is machined to tight tolerances, inspected for critical dimensions, and checked for balance on vented designs. The rotors carry a 12-month warranty against defects in material and workmanship. DFC 5000 Advanced pads are post-cured and scorched during production to support consistent friction characteristics from the first stop.
Brake Kit for Mercedes-Benz GLC300
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for 2016-2018 Mercedes-Benz GLC300 front and rear brake service on vehicles without the Sport Package. Part number 4514-63057 combines coated rotors, ceramic pads, and brake hardware in one service kit for a complete brake refresh.
Key Features
- Fits 2016-2018 Mercedes-Benz GLC300, front and rear, without Sport Package
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Dry-processed rotors arrive ready to install
Product Details
Part number 4514-63057 is a complete disc brake kit for the Mercedes-Benz GLC300 that pairs DFC GEOSPEC coated rotors with DFC 5000 Advanced ceramic pads and matching hardware. The rotor design uses G3000/G11H18 cast iron and a non-directional finish to support even pad bedding and smoother braking. The coated surface helps resist rust better than conventional paint or zinc finishes, while the dry packaging avoids the need to clean oil from the rotor before installation. DFC’s 5000 Advanced pad line is formulated for stable friction performance and uses shims to help reduce brake noise.
Common Brake Service Problems This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Noise caused by fatigued or corroded brake hardware
- Reduced stopping performance from worn pads
- Rust buildup on exposed rotor surfaces
- Uneven pad wear from aged hardware components
Installation Notes and Tips
Verify that your vehicle is a 2016-2018 Mercedes-Benz GLC300 without the Sport Package before ordering. This kit is intended for front and rear brake service, so confirm axle coverage during inspection. Clean the hub mounting surface before rotor installation and follow proper bedding procedures after assembly to help the pads and rotors seat evenly. Part number 4514-63057 is designed for direct brake service on the listed application.
Quality Assurance
Each DFC GEOSPEC rotor is machined to tight tolerances, inspected for critical dimensions, and checked for balance on vented designs. The rotors carry a 12-month warranty against defects in material and workmanship. DFC 5000 Advanced pads are post-cured and scorched during production to support consistent friction characteristics from the first stop.
Description
Brake Kit for Mercedes-Benz GLC300
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for 2016-2018 Mercedes-Benz GLC300 front and rear brake service on vehicles without the Sport Package. Part number 4514-63057 combines coated rotors, ceramic pads, and brake hardware in one service kit for a complete brake refresh.
Key Features
- Fits 2016-2018 Mercedes-Benz GLC300, front and rear, without Sport Package
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Dry-processed rotors arrive ready to install
Product Details
Part number 4514-63057 is a complete disc brake kit for the Mercedes-Benz GLC300 that pairs DFC GEOSPEC coated rotors with DFC 5000 Advanced ceramic pads and matching hardware. The rotor design uses G3000/G11H18 cast iron and a non-directional finish to support even pad bedding and smoother braking. The coated surface helps resist rust better than conventional paint or zinc finishes, while the dry packaging avoids the need to clean oil from the rotor before installation. DFC’s 5000 Advanced pad line is formulated for stable friction performance and uses shims to help reduce brake noise.
Common Brake Service Problems This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Noise caused by fatigued or corroded brake hardware
- Reduced stopping performance from worn pads
- Rust buildup on exposed rotor surfaces
- Uneven pad wear from aged hardware components
Installation Notes and Tips
Verify that your vehicle is a 2016-2018 Mercedes-Benz GLC300 without the Sport Package before ordering. This kit is intended for front and rear brake service, so confirm axle coverage during inspection. Clean the hub mounting surface before rotor installation and follow proper bedding procedures after assembly to help the pads and rotors seat evenly. Part number 4514-63057 is designed for direct brake service on the listed application.
Quality Assurance
Each DFC GEOSPEC rotor is machined to tight tolerances, inspected for critical dimensions, and checked for balance on vented designs. The rotors carry a 12-month warranty against defects in material and workmanship. DFC 5000 Advanced pads are post-cured and scorched during production to support consistent friction characteristics from the first stop.
