Dynamite Friction 4514-63034 Disc Brake Kit - Front and Rear
Brake Kit for Mercedes-Benz SLK Front and Rear
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Low Metallic and Hardware Kit is a complete disc brake kit for select Mercedes-Benz SLK applications. It combines coated rotors, low metallic pads, and matching brake hardware for a service-focused brake repair on the front and rear axles.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors that are ready to install without oil removal
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- DFC 5000 Advanced low metallic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Brake hardware kit with PTFE coating, vulcanized rubber, and stainless steel components
- Part number 4514-63034
Product Details
Built for 2006-2008 Mercedes-Benz SLK280 and 2009-2011 Mercedes-Benz SLK300, this brake service kit is designed for vehicles without the Sport Package. The coated rotors are machined to tight tolerances, inspected for balance, and finished to support quieter stops and consistent pedal feel. The low metallic pad formulation is paired with hardware designed to restore proper caliper movement and reduce brake noise caused by worn or corroded components. If you are searching for a Mercedes-Benz SLK front and rear brake kit, or a DFC 4514-63034 brake kit for SLK280 or SLK300 service, this package brings the major wear items together in one application-specific setup.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Rotor rust and surface corrosion
- Uneven pad wear caused by stressed hardware
- Reduced braking smoothness from worn rotor surfaces
- Longer stopping response from aged friction material
Installation Notes
Confirm vehicle configuration before ordering: this kit fits Mercedes-Benz SLK models without the Sport Package. Clean installation surfaces, inspect calipers and slides, and follow proper bedding procedures after installation. The rotors are shipped dry and ready to install, which helps reduce prep time during service. Part number 4514-63034 should be matched to the exact vehicle application before brake work begins.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE-style specifications, processed to tight tolerances, and 100% inspected for critical dimensions and balance where applicable. The rotors include a 12-month warranty against defects in material and workmanship. DFC 5000 Advanced pads are post cured and scorched for stable friction performance, while the hardware kit is engineered to OE form, fit, and function standards.
Brake Kit for Mercedes-Benz SLK Front and Rear
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Low Metallic and Hardware Kit is a complete disc brake kit for select Mercedes-Benz SLK applications. It combines coated rotors, low metallic pads, and matching brake hardware for a service-focused brake repair on the front and rear axles.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors that are ready to install without oil removal
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- DFC 5000 Advanced low metallic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Brake hardware kit with PTFE coating, vulcanized rubber, and stainless steel components
- Part number 4514-63034
Product Details
Built for 2006-2008 Mercedes-Benz SLK280 and 2009-2011 Mercedes-Benz SLK300, this brake service kit is designed for vehicles without the Sport Package. The coated rotors are machined to tight tolerances, inspected for balance, and finished to support quieter stops and consistent pedal feel. The low metallic pad formulation is paired with hardware designed to restore proper caliper movement and reduce brake noise caused by worn or corroded components. If you are searching for a Mercedes-Benz SLK front and rear brake kit, or a DFC 4514-63034 brake kit for SLK280 or SLK300 service, this package brings the major wear items together in one application-specific setup.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Rotor rust and surface corrosion
- Uneven pad wear caused by stressed hardware
- Reduced braking smoothness from worn rotor surfaces
- Longer stopping response from aged friction material
Installation Notes
Confirm vehicle configuration before ordering: this kit fits Mercedes-Benz SLK models without the Sport Package. Clean installation surfaces, inspect calipers and slides, and follow proper bedding procedures after installation. The rotors are shipped dry and ready to install, which helps reduce prep time during service. Part number 4514-63034 should be matched to the exact vehicle application before brake work begins.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE-style specifications, processed to tight tolerances, and 100% inspected for critical dimensions and balance where applicable. The rotors include a 12-month warranty against defects in material and workmanship. DFC 5000 Advanced pads are post cured and scorched for stable friction performance, while the hardware kit is engineered to OE form, fit, and function standards.
Description
Brake Kit for Mercedes-Benz SLK Front and Rear
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Low Metallic and Hardware Kit is a complete disc brake kit for select Mercedes-Benz SLK applications. It combines coated rotors, low metallic pads, and matching brake hardware for a service-focused brake repair on the front and rear axles.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors that are ready to install without oil removal
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- DFC 5000 Advanced low metallic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Brake hardware kit with PTFE coating, vulcanized rubber, and stainless steel components
- Part number 4514-63034
Product Details
Built for 2006-2008 Mercedes-Benz SLK280 and 2009-2011 Mercedes-Benz SLK300, this brake service kit is designed for vehicles without the Sport Package. The coated rotors are machined to tight tolerances, inspected for balance, and finished to support quieter stops and consistent pedal feel. The low metallic pad formulation is paired with hardware designed to restore proper caliper movement and reduce brake noise caused by worn or corroded components. If you are searching for a Mercedes-Benz SLK front and rear brake kit, or a DFC 4514-63034 brake kit for SLK280 or SLK300 service, this package brings the major wear items together in one application-specific setup.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Rotor rust and surface corrosion
- Uneven pad wear caused by stressed hardware
- Reduced braking smoothness from worn rotor surfaces
- Longer stopping response from aged friction material
Installation Notes
Confirm vehicle configuration before ordering: this kit fits Mercedes-Benz SLK models without the Sport Package. Clean installation surfaces, inspect calipers and slides, and follow proper bedding procedures after installation. The rotors are shipped dry and ready to install, which helps reduce prep time during service. Part number 4514-63034 should be matched to the exact vehicle application before brake work begins.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE-style specifications, processed to tight tolerances, and 100% inspected for critical dimensions and balance where applicable. The rotors include a 12-month warranty against defects in material and workmanship. DFC 5000 Advanced pads are post cured and scorched for stable friction performance, while the hardware kit is engineered to OE form, fit, and function standards.
