Dynamite Friction 4514-59076 Disc Brake Kit - Front and Rear
Brake Kit for Honda HR-V Front and Rear
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for drivers servicing a 2016-2022 Honda HR-V front and rear brake system. Part number 4514-59076 combines coated rotors, ceramic-style pads, and matching brake hardware in one service kit for a complete brake refresh.
Key Features
- Fits 2016-2021 Honda HR-V, front and rear
- Fits 2022 Honda HR-V, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4514-59076
Product Details
DFC GEOSPEC rotors are engineered to OE specifications using G3000/G11H18 cast iron, then machined to tight tolerances and inspected for critical dimensions and balance. The coated surface helps resist rust better than conventional paint or zinc finishes, while the dry-ready design eliminates the need to clean oil from the rotor before installation. The 5000 Advanced Brake Pads are formulated for consistent friction and reduced initial break-in, and the included hardware is designed to restore proper spring tension and caliper movement. This part number 4514-59076 is a direct service solution for Honda HR-V brake maintenance.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Rust buildup on rotor surfaces
- Uneven pad wear or caliper movement
- Reduced braking smoothness during stop-and-go driving
- Longer stopping response caused by worn friction components
Installation Notes
Use this kit for front and rear brake service on the listed Honda HR-V applications. The rotors are shipped dry and ready to install, which can reduce prep time during brake work. Inspect calipers, slides, and mounting points before assembly, and follow proper bedding procedures after installation to help the pads and rotors seat evenly. Confirm fitment by year before ordering, especially for 2022 Honda HR-V and 2016-2021 Honda HR-V applications.
Quality Assurance
Each rotor is 100% inspected after machining to verify critical attributes and OE-spec compliance. DFC also backs the rotors with a 12-month warranty against defects in material and workmanship. Part number 4514-59076 is built as a complete brake service kit for dependable replacement on the Honda HR-V.
Brake Kit for Honda HR-V Front and Rear
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for drivers servicing a 2016-2022 Honda HR-V front and rear brake system. Part number 4514-59076 combines coated rotors, ceramic-style pads, and matching brake hardware in one service kit for a complete brake refresh.
Key Features
- Fits 2016-2021 Honda HR-V, front and rear
- Fits 2022 Honda HR-V, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4514-59076
Product Details
DFC GEOSPEC rotors are engineered to OE specifications using G3000/G11H18 cast iron, then machined to tight tolerances and inspected for critical dimensions and balance. The coated surface helps resist rust better than conventional paint or zinc finishes, while the dry-ready design eliminates the need to clean oil from the rotor before installation. The 5000 Advanced Brake Pads are formulated for consistent friction and reduced initial break-in, and the included hardware is designed to restore proper spring tension and caliper movement. This part number 4514-59076 is a direct service solution for Honda HR-V brake maintenance.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Rust buildup on rotor surfaces
- Uneven pad wear or caliper movement
- Reduced braking smoothness during stop-and-go driving
- Longer stopping response caused by worn friction components
Installation Notes
Use this kit for front and rear brake service on the listed Honda HR-V applications. The rotors are shipped dry and ready to install, which can reduce prep time during brake work. Inspect calipers, slides, and mounting points before assembly, and follow proper bedding procedures after installation to help the pads and rotors seat evenly. Confirm fitment by year before ordering, especially for 2022 Honda HR-V and 2016-2021 Honda HR-V applications.
Quality Assurance
Each rotor is 100% inspected after machining to verify critical attributes and OE-spec compliance. DFC also backs the rotors with a 12-month warranty against defects in material and workmanship. Part number 4514-59076 is built as a complete brake service kit for dependable replacement on the Honda HR-V.
Description
Brake Kit for Honda HR-V Front and Rear
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for drivers servicing a 2016-2022 Honda HR-V front and rear brake system. Part number 4514-59076 combines coated rotors, ceramic-style pads, and matching brake hardware in one service kit for a complete brake refresh.
Key Features
- Fits 2016-2021 Honda HR-V, front and rear
- Fits 2022 Honda HR-V, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4514-59076
Product Details
DFC GEOSPEC rotors are engineered to OE specifications using G3000/G11H18 cast iron, then machined to tight tolerances and inspected for critical dimensions and balance. The coated surface helps resist rust better than conventional paint or zinc finishes, while the dry-ready design eliminates the need to clean oil from the rotor before installation. The 5000 Advanced Brake Pads are formulated for consistent friction and reduced initial break-in, and the included hardware is designed to restore proper spring tension and caliper movement. This part number 4514-59076 is a direct service solution for Honda HR-V brake maintenance.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Rust buildup on rotor surfaces
- Uneven pad wear or caliper movement
- Reduced braking smoothness during stop-and-go driving
- Longer stopping response caused by worn friction components
Installation Notes
Use this kit for front and rear brake service on the listed Honda HR-V applications. The rotors are shipped dry and ready to install, which can reduce prep time during brake work. Inspect calipers, slides, and mounting points before assembly, and follow proper bedding procedures after installation to help the pads and rotors seat evenly. Confirm fitment by year before ordering, especially for 2022 Honda HR-V and 2016-2021 Honda HR-V applications.
Quality Assurance
Each rotor is 100% inspected after machining to verify critical attributes and OE-spec compliance. DFC also backs the rotors with a 12-month warranty against defects in material and workmanship. Part number 4514-59076 is built as a complete brake service kit for dependable replacement on the Honda HR-V.
