Dynamite Friction 4514-59071 Disc Brake Kit - Front and Rear
Brake Kit for Acura Integra
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for 1997-2001 Acura Integra front and rear brake service. Part number 4514-59071 combines coated rotors, ceramic pads, and matched hardware for a complete brake refresh on the Acura Integra.
Key Features
- Fits 1997-2001 Acura Integra, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for more even pad bed-in and quieter stops
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4514-59071
Product Details
This brake service kit is engineered for drivers who need a direct-fit brake solution for the 1997-2001 Acura Integra. The DFC GEOSPEC rotors are processed dry and ready to install, which helps reduce prep time during brake service. The rotor castings use G3000/G11H18 cast iron and are machined to OE-level tolerances, then inspected for balance and critical dimensions. The 5000 Advanced ceramic pads are formulated for stable friction performance and consistent pedal response, while the included hardware is designed to address wear, corrosion, and caliper movement issues that can affect braking feel. Part number 4514-59071 is a practical choice for Acura Integra front and rear brake replacement.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Rotor rust buildup on exposed braking surfaces
- Longer stopping distances from worn friction material
- Vibration or harshness during braking
Installation Notes
Compatible With 1997-2001 Acura Integra, front and rear. Inspect calipers, slides, and mounting points before installation, and replace any damaged components as needed. Clean the hub face thoroughly to help prevent rotor runout concerns, and follow proper bedding procedures after installation to promote even pad transfer. The coated rotor surface is designed to be swept away by the brake pads during normal use.
Quality Assurance
DFC states that each rotor is 100% inspected for critical attributes and balance, and the kit includes rotors engineered to OE specifications for durability and stability. The rotors carry a 12-month warranty against defects in material and workmanship. Part number 4514-59071 reflects a complete brake kit approach for Acura Integra service.
Brake Kit for Acura Integra
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for 1997-2001 Acura Integra front and rear brake service. Part number 4514-59071 combines coated rotors, ceramic pads, and matched hardware for a complete brake refresh on the Acura Integra.
Key Features
- Fits 1997-2001 Acura Integra, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for more even pad bed-in and quieter stops
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4514-59071
Product Details
This brake service kit is engineered for drivers who need a direct-fit brake solution for the 1997-2001 Acura Integra. The DFC GEOSPEC rotors are processed dry and ready to install, which helps reduce prep time during brake service. The rotor castings use G3000/G11H18 cast iron and are machined to OE-level tolerances, then inspected for balance and critical dimensions. The 5000 Advanced ceramic pads are formulated for stable friction performance and consistent pedal response, while the included hardware is designed to address wear, corrosion, and caliper movement issues that can affect braking feel. Part number 4514-59071 is a practical choice for Acura Integra front and rear brake replacement.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Rotor rust buildup on exposed braking surfaces
- Longer stopping distances from worn friction material
- Vibration or harshness during braking
Installation Notes
Compatible With 1997-2001 Acura Integra, front and rear. Inspect calipers, slides, and mounting points before installation, and replace any damaged components as needed. Clean the hub face thoroughly to help prevent rotor runout concerns, and follow proper bedding procedures after installation to promote even pad transfer. The coated rotor surface is designed to be swept away by the brake pads during normal use.
Quality Assurance
DFC states that each rotor is 100% inspected for critical attributes and balance, and the kit includes rotors engineered to OE specifications for durability and stability. The rotors carry a 12-month warranty against defects in material and workmanship. Part number 4514-59071 reflects a complete brake kit approach for Acura Integra service.
Description
Brake Kit for Acura Integra
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for 1997-2001 Acura Integra front and rear brake service. Part number 4514-59071 combines coated rotors, ceramic pads, and matched hardware for a complete brake refresh on the Acura Integra.
Key Features
- Fits 1997-2001 Acura Integra, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for more even pad bed-in and quieter stops
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4514-59071
Product Details
This brake service kit is engineered for drivers who need a direct-fit brake solution for the 1997-2001 Acura Integra. The DFC GEOSPEC rotors are processed dry and ready to install, which helps reduce prep time during brake service. The rotor castings use G3000/G11H18 cast iron and are machined to OE-level tolerances, then inspected for balance and critical dimensions. The 5000 Advanced ceramic pads are formulated for stable friction performance and consistent pedal response, while the included hardware is designed to address wear, corrosion, and caliper movement issues that can affect braking feel. Part number 4514-59071 is a practical choice for Acura Integra front and rear brake replacement.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Rotor rust buildup on exposed braking surfaces
- Longer stopping distances from worn friction material
- Vibration or harshness during braking
Installation Notes
Compatible With 1997-2001 Acura Integra, front and rear. Inspect calipers, slides, and mounting points before installation, and replace any damaged components as needed. Clean the hub face thoroughly to help prevent rotor runout concerns, and follow proper bedding procedures after installation to promote even pad transfer. The coated rotor surface is designed to be swept away by the brake pads during normal use.
Quality Assurance
DFC states that each rotor is 100% inspected for critical attributes and balance, and the kit includes rotors engineered to OE specifications for durability and stability. The rotors carry a 12-month warranty against defects in material and workmanship. Part number 4514-59071 reflects a complete brake kit approach for Acura Integra service.
