Dynamite Friction 4514-59053 Disc Brake Kit - Front and Rear
Brake Kit for 2009-2014 Acura TL
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for front and rear brake service on the 2009-2014 Acura TL. Part number 4514-59053 combines coated rotors, ceramic pads, and brake hardware in one service kit for a complete brake refresh.
Key Features
- Fits 2009-2014 Acura TL, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors are processed dry and ready to install
- Non-directional rotor finish supports even pad bed-in and quieter stops
- 5000 Advanced ceramic brake pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4514-59053
Product Details
DFC designed this brake service kit for vehicles that need OE-style fit, stable braking behavior, and corrosion protection. The GEOSPEC rotors are machined to tight tolerances from G3000/G11H18 cast iron, then inspected for balance and critical dimensions. The 5000 Advanced pads are formulated for consistent friction and reduced break-in time, while the included hardware addresses worn or fatigued brake clips and related noise concerns. For Acura TL brake repair, this kit provides the core components needed for a front and rear brake job in one package. Part number 4514-59053 is a direct match for the listed application.
What This Brake Kit Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven braking feel from aged rotors
- Rust buildup on exposed rotor surfaces
- Longer stopping distances caused by worn friction material
- Caliper movement issues related to corroded hardware
Installation Notes
Before installation, confirm rotor size and brake configuration against the vehicle’s existing components. Clean the hub mounting surface, inspect calipers and slides, and follow proper bedding procedures after installation. The rotors are shipped dry and do not require oil removal before service. For Acura TL brake replacement, verify both front and rear axle requirements before beginning the job.
Quality Assurance
DFC rotors are 100% inspected for balance and critical dimensions, and each rotor is covered by a 12-month warranty against defects in material and workmanship. The pads are post-cured and scorched to support stable friction performance, and the hardware is engineered to OE-style form, fit, and function. Part number 4514-59053 is built to meet the demands of a complete brake service on the 2009-2014 Acura TL.
Brake Kit for 2009-2014 Acura TL
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for front and rear brake service on the 2009-2014 Acura TL. Part number 4514-59053 combines coated rotors, ceramic pads, and brake hardware in one service kit for a complete brake refresh.
Key Features
- Fits 2009-2014 Acura TL, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors are processed dry and ready to install
- Non-directional rotor finish supports even pad bed-in and quieter stops
- 5000 Advanced ceramic brake pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4514-59053
Product Details
DFC designed this brake service kit for vehicles that need OE-style fit, stable braking behavior, and corrosion protection. The GEOSPEC rotors are machined to tight tolerances from G3000/G11H18 cast iron, then inspected for balance and critical dimensions. The 5000 Advanced pads are formulated for consistent friction and reduced break-in time, while the included hardware addresses worn or fatigued brake clips and related noise concerns. For Acura TL brake repair, this kit provides the core components needed for a front and rear brake job in one package. Part number 4514-59053 is a direct match for the listed application.
What This Brake Kit Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven braking feel from aged rotors
- Rust buildup on exposed rotor surfaces
- Longer stopping distances caused by worn friction material
- Caliper movement issues related to corroded hardware
Installation Notes
Before installation, confirm rotor size and brake configuration against the vehicle’s existing components. Clean the hub mounting surface, inspect calipers and slides, and follow proper bedding procedures after installation. The rotors are shipped dry and do not require oil removal before service. For Acura TL brake replacement, verify both front and rear axle requirements before beginning the job.
Quality Assurance
DFC rotors are 100% inspected for balance and critical dimensions, and each rotor is covered by a 12-month warranty against defects in material and workmanship. The pads are post-cured and scorched to support stable friction performance, and the hardware is engineered to OE-style form, fit, and function. Part number 4514-59053 is built to meet the demands of a complete brake service on the 2009-2014 Acura TL.
Description
Brake Kit for 2009-2014 Acura TL
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for front and rear brake service on the 2009-2014 Acura TL. Part number 4514-59053 combines coated rotors, ceramic pads, and brake hardware in one service kit for a complete brake refresh.
Key Features
- Fits 2009-2014 Acura TL, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors are processed dry and ready to install
- Non-directional rotor finish supports even pad bed-in and quieter stops
- 5000 Advanced ceramic brake pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4514-59053
Product Details
DFC designed this brake service kit for vehicles that need OE-style fit, stable braking behavior, and corrosion protection. The GEOSPEC rotors are machined to tight tolerances from G3000/G11H18 cast iron, then inspected for balance and critical dimensions. The 5000 Advanced pads are formulated for consistent friction and reduced break-in time, while the included hardware addresses worn or fatigued brake clips and related noise concerns. For Acura TL brake repair, this kit provides the core components needed for a front and rear brake job in one package. Part number 4514-59053 is a direct match for the listed application.
What This Brake Kit Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven braking feel from aged rotors
- Rust buildup on exposed rotor surfaces
- Longer stopping distances caused by worn friction material
- Caliper movement issues related to corroded hardware
Installation Notes
Before installation, confirm rotor size and brake configuration against the vehicle’s existing components. Clean the hub mounting surface, inspect calipers and slides, and follow proper bedding procedures after installation. The rotors are shipped dry and do not require oil removal before service. For Acura TL brake replacement, verify both front and rear axle requirements before beginning the job.
Quality Assurance
DFC rotors are 100% inspected for balance and critical dimensions, and each rotor is covered by a 12-month warranty against defects in material and workmanship. The pads are post-cured and scorched to support stable friction performance, and the hardware is engineered to OE-style form, fit, and function. Part number 4514-59053 is built to meet the demands of a complete brake service on the 2009-2014 Acura TL.
