Dynamite Friction 4514-59043 Disc Brake Kit - Front and Rear
Brake Kit for Honda Crosstour and Accord Crosstour
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a complete disc brake service solution for select Honda crossover applications. It combines coated rotors, ceramic brake pads, and matched hardware for front and rear brake service on the 2010-2015 Honda Crosstour and Accord Crosstour.
Key Features
- Part number 4514-59043
- Fits 2012-2015 Honda Crosstour, front and rear
- Fits 2010-2011 Honda Accord Crosstour, front and rear
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced break-in time and consistent initial stopping response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed, dry-shipped rotors ready for installation
- Non-directional rotor finish for smoother pad bed-in and quieter braking
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- 12-month rotor warranty against defects in material and workmanship
Product Details
DFC’s 5000 Advanced brake pad line is built around application-specific friction formulas developed with OEM friction suppliers across multiple continents. The pads are 100% post cured for stable performance and scorched to remove uncured bonding agents, which helps deliver consistent braking from the first stop. On the rotor side, GeoSpec coated rotors are machined to tight tolerances, finished for even pad contact, and inspected for balance and critical dimensions to meet OE specifications. The hardware kit adds corrosion protection and proper spring tension retention for a more complete brake service on the Honda Crosstour and Honda Accord Crosstour.
What This Brake Kit Helps Address
- Brake noise from worn or fatigued hardware
- Uneven pad wear caused by corroded or weak hardware components
- Reduced stopping consistency from worn rotors and pads
- Rust buildup on exposed rotor surfaces
- Longer brake service time caused by uncoated, oil-covered rotors
Installation Notes and Tips
Compatible With 2012-2015 Honda Crosstour, front and rear, and 2010-2011 Honda Accord Crosstour, front and rear. The rotors are shipped dry and ready to install, so no cleaning of protective oil is required before service. For best results, follow standard brake service procedures, inspect caliper condition, and verify all mounting surfaces are clean before assembly. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Quality Assurance
Each GeoSpec rotor is manufactured to OE-style specifications, processed through precision machining and inspection steps, and backed by a 12-month warranty against defects in material and workmanship. The DFC brake pad and hardware components are engineered to support stable friction performance, quieter operation, and consistent fitment for the listed Honda Crosstour applications. Part number 4514-59043 is a complete brake service kit for front and rear axle replacement.
Brake Kit for Honda Crosstour and Accord Crosstour
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a complete disc brake service solution for select Honda crossover applications. It combines coated rotors, ceramic brake pads, and matched hardware for front and rear brake service on the 2010-2015 Honda Crosstour and Accord Crosstour.
Key Features
- Part number 4514-59043
- Fits 2012-2015 Honda Crosstour, front and rear
- Fits 2010-2011 Honda Accord Crosstour, front and rear
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced break-in time and consistent initial stopping response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed, dry-shipped rotors ready for installation
- Non-directional rotor finish for smoother pad bed-in and quieter braking
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- 12-month rotor warranty against defects in material and workmanship
Product Details
DFC’s 5000 Advanced brake pad line is built around application-specific friction formulas developed with OEM friction suppliers across multiple continents. The pads are 100% post cured for stable performance and scorched to remove uncured bonding agents, which helps deliver consistent braking from the first stop. On the rotor side, GeoSpec coated rotors are machined to tight tolerances, finished for even pad contact, and inspected for balance and critical dimensions to meet OE specifications. The hardware kit adds corrosion protection and proper spring tension retention for a more complete brake service on the Honda Crosstour and Honda Accord Crosstour.
What This Brake Kit Helps Address
- Brake noise from worn or fatigued hardware
- Uneven pad wear caused by corroded or weak hardware components
- Reduced stopping consistency from worn rotors and pads
- Rust buildup on exposed rotor surfaces
- Longer brake service time caused by uncoated, oil-covered rotors
Installation Notes and Tips
Compatible With 2012-2015 Honda Crosstour, front and rear, and 2010-2011 Honda Accord Crosstour, front and rear. The rotors are shipped dry and ready to install, so no cleaning of protective oil is required before service. For best results, follow standard brake service procedures, inspect caliper condition, and verify all mounting surfaces are clean before assembly. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Quality Assurance
Each GeoSpec rotor is manufactured to OE-style specifications, processed through precision machining and inspection steps, and backed by a 12-month warranty against defects in material and workmanship. The DFC brake pad and hardware components are engineered to support stable friction performance, quieter operation, and consistent fitment for the listed Honda Crosstour applications. Part number 4514-59043 is a complete brake service kit for front and rear axle replacement.
Original: $336.11
-65%$336.11
$117.64Description
Brake Kit for Honda Crosstour and Accord Crosstour
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a complete disc brake service solution for select Honda crossover applications. It combines coated rotors, ceramic brake pads, and matched hardware for front and rear brake service on the 2010-2015 Honda Crosstour and Accord Crosstour.
Key Features
- Part number 4514-59043
- Fits 2012-2015 Honda Crosstour, front and rear
- Fits 2010-2011 Honda Accord Crosstour, front and rear
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced break-in time and consistent initial stopping response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed, dry-shipped rotors ready for installation
- Non-directional rotor finish for smoother pad bed-in and quieter braking
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- 12-month rotor warranty against defects in material and workmanship
Product Details
DFC’s 5000 Advanced brake pad line is built around application-specific friction formulas developed with OEM friction suppliers across multiple continents. The pads are 100% post cured for stable performance and scorched to remove uncured bonding agents, which helps deliver consistent braking from the first stop. On the rotor side, GeoSpec coated rotors are machined to tight tolerances, finished for even pad contact, and inspected for balance and critical dimensions to meet OE specifications. The hardware kit adds corrosion protection and proper spring tension retention for a more complete brake service on the Honda Crosstour and Honda Accord Crosstour.
What This Brake Kit Helps Address
- Brake noise from worn or fatigued hardware
- Uneven pad wear caused by corroded or weak hardware components
- Reduced stopping consistency from worn rotors and pads
- Rust buildup on exposed rotor surfaces
- Longer brake service time caused by uncoated, oil-covered rotors
Installation Notes and Tips
Compatible With 2012-2015 Honda Crosstour, front and rear, and 2010-2011 Honda Accord Crosstour, front and rear. The rotors are shipped dry and ready to install, so no cleaning of protective oil is required before service. For best results, follow standard brake service procedures, inspect caliper condition, and verify all mounting surfaces are clean before assembly. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Quality Assurance
Each GeoSpec rotor is manufactured to OE-style specifications, processed through precision machining and inspection steps, and backed by a 12-month warranty against defects in material and workmanship. The DFC brake pad and hardware components are engineered to support stable friction performance, quieter operation, and consistent fitment for the listed Honda Crosstour applications. Part number 4514-59043 is a complete brake service kit for front and rear axle replacement.
