Dynamite Friction 4514-59035 Disc Brake Kit - Front and Rear
Brake Kit for 2011-2015 Honda CR-Z
This DFC brake kit combines GEOSPEC coated rotors, 5000 Advanced ceramic brake pads, and hardware for the front and rear of the 2011-2015 Honda CR-Z. Part number 4514-59035 is built for drivers who want an OE-style brake service package with corrosion-resistant rotors and low-noise pad hardware.
Key Features
- Fits 2011-2015 Honda CR-Z, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Non-directional rotor finish for smoother pad bed-in and quieter stops
- Part number 4514-59035
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware package is engineered as a complete disc brake service kit for the Honda CR-Z. The rotors are cast to G3000/G11H18 specifications, machined to tight tolerances, and finished dry so they are ready for installation without extra cleaning. The coated surface helps resist rust, while the non-directional finish supports even pad contact during break-in. The ceramic pads are post-cured and scorched to promote stable friction performance from the first stop, and the included hardware is designed to restore proper caliper movement and reduce brake noise. If you are searching for a front and rear brake kit for 2011-2015 Honda CR-Z, part number 4514-59035 is a direct fitment match for that application.
Common Brake Issues This Kit Can Address
- Rotor rust and surface corrosion
- Brake noise from worn hardware or pad shims
- Uneven pad wear caused by fatigued hardware
- Longer stopping distances from worn friction material
- Brake pulsation related to rotor wear or finish issues
Installation Notes
Before installation, inspect calipers, slides, and mounting points for wear or corrosion. Clean the hub surface thoroughly so the coated rotors seat flat, and follow proper torque procedures during assembly. The dry rotor finish is ready to install, and the pad surface is designed to reduce the need for an extended break-in period. For best results on a Honda CR-Z brake replacement, verify axle position and compare the existing components to the kit contents before beginning service.
Quality Assurance
DFC states that each rotor is 100% inspected for critical dimensions and balance, and the rotors carry a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and assembled with premium shims, while the hardware uses PTFE coating, vulcanized rubber, and stainless steel for OE-style fit and function. Part number 4514-59035 reflects a complete brake service solution for the 2011-2015 Honda CR-Z.
Brake Kit for 2011-2015 Honda CR-Z
This DFC brake kit combines GEOSPEC coated rotors, 5000 Advanced ceramic brake pads, and hardware for the front and rear of the 2011-2015 Honda CR-Z. Part number 4514-59035 is built for drivers who want an OE-style brake service package with corrosion-resistant rotors and low-noise pad hardware.
Key Features
- Fits 2011-2015 Honda CR-Z, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Non-directional rotor finish for smoother pad bed-in and quieter stops
- Part number 4514-59035
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware package is engineered as a complete disc brake service kit for the Honda CR-Z. The rotors are cast to G3000/G11H18 specifications, machined to tight tolerances, and finished dry so they are ready for installation without extra cleaning. The coated surface helps resist rust, while the non-directional finish supports even pad contact during break-in. The ceramic pads are post-cured and scorched to promote stable friction performance from the first stop, and the included hardware is designed to restore proper caliper movement and reduce brake noise. If you are searching for a front and rear brake kit for 2011-2015 Honda CR-Z, part number 4514-59035 is a direct fitment match for that application.
Common Brake Issues This Kit Can Address
- Rotor rust and surface corrosion
- Brake noise from worn hardware or pad shims
- Uneven pad wear caused by fatigued hardware
- Longer stopping distances from worn friction material
- Brake pulsation related to rotor wear or finish issues
Installation Notes
Before installation, inspect calipers, slides, and mounting points for wear or corrosion. Clean the hub surface thoroughly so the coated rotors seat flat, and follow proper torque procedures during assembly. The dry rotor finish is ready to install, and the pad surface is designed to reduce the need for an extended break-in period. For best results on a Honda CR-Z brake replacement, verify axle position and compare the existing components to the kit contents before beginning service.
Quality Assurance
DFC states that each rotor is 100% inspected for critical dimensions and balance, and the rotors carry a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and assembled with premium shims, while the hardware uses PTFE coating, vulcanized rubber, and stainless steel for OE-style fit and function. Part number 4514-59035 reflects a complete brake service solution for the 2011-2015 Honda CR-Z.
Original: $241.10
-65%$241.10
$84.38Description
Brake Kit for 2011-2015 Honda CR-Z
This DFC brake kit combines GEOSPEC coated rotors, 5000 Advanced ceramic brake pads, and hardware for the front and rear of the 2011-2015 Honda CR-Z. Part number 4514-59035 is built for drivers who want an OE-style brake service package with corrosion-resistant rotors and low-noise pad hardware.
Key Features
- Fits 2011-2015 Honda CR-Z, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Non-directional rotor finish for smoother pad bed-in and quieter stops
- Part number 4514-59035
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware package is engineered as a complete disc brake service kit for the Honda CR-Z. The rotors are cast to G3000/G11H18 specifications, machined to tight tolerances, and finished dry so they are ready for installation without extra cleaning. The coated surface helps resist rust, while the non-directional finish supports even pad contact during break-in. The ceramic pads are post-cured and scorched to promote stable friction performance from the first stop, and the included hardware is designed to restore proper caliper movement and reduce brake noise. If you are searching for a front and rear brake kit for 2011-2015 Honda CR-Z, part number 4514-59035 is a direct fitment match for that application.
Common Brake Issues This Kit Can Address
- Rotor rust and surface corrosion
- Brake noise from worn hardware or pad shims
- Uneven pad wear caused by fatigued hardware
- Longer stopping distances from worn friction material
- Brake pulsation related to rotor wear or finish issues
Installation Notes
Before installation, inspect calipers, slides, and mounting points for wear or corrosion. Clean the hub surface thoroughly so the coated rotors seat flat, and follow proper torque procedures during assembly. The dry rotor finish is ready to install, and the pad surface is designed to reduce the need for an extended break-in period. For best results on a Honda CR-Z brake replacement, verify axle position and compare the existing components to the kit contents before beginning service.
Quality Assurance
DFC states that each rotor is 100% inspected for critical dimensions and balance, and the rotors carry a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and assembled with premium shims, while the hardware uses PTFE coating, vulcanized rubber, and stainless steel for OE-style fit and function. Part number 4514-59035 reflects a complete brake service solution for the 2011-2015 Honda CR-Z.
