Dynamite Friction 4514-59032 Disc Brake Kit - Front and Rear
Brake Kit for 2009-2011 Honda Civic
The DFC Geospec Rotors with 5000 Advanced Brake Pads includes Hardware kit is a front and rear disc brake service solution for the 2009-2011 Honda Civic. Part number 4514-59032 combines coated rotors, advanced friction pads, and matching hardware for a complete brake refresh.
Built for the Honda Civic brake service market, this kit is designed to restore stopping performance, reduce brake noise, and simplify rotor and pad replacement on both axles.
Key Features
- Fits 2009-2011 Honda Civic, front and rear
- DFC GeoSpec coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Non-directional rotor finish for smoother pad bed-in
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4514-59032
Product Details
DFC 5000 Advanced Brake Pads are formulated for stable friction performance and consistent pedal response. The pads are post cured, then scorched to remove uncured bonding agents, which helps deliver stopping power from the first stop. DFC GeoSpec rotors are machined to tight tolerances from G3000/G11H18 cast iron, then finished for even pad contact and quieter operation. Each rotor is processed dry and ready to install, which helps reduce prep time during brake service. The included hardware is engineered to replace worn or corroded brake hardware that can contribute to uneven wear and caliper movement. This part number 4514-59032 is a direct-fit brake service kit for Honda Civic front and rear brake maintenance.
Common Brake Issues This Kit Addresses
- Brake noise during stops
- Pulsation or uneven braking feel from worn rotors
- Reduced stopping performance from aged pads
- Corroded or fatigued hardware causing caliper movement
- Uneven pad wear on the Honda Civic
Installation Notes
Fits 2009-2011 Honda Civic, front and rear. Inspect calipers, slides, and brake fluid condition before installation. Clean all mating surfaces, follow proper torque specifications, and bed in the pads according to the manufacturer procedure for even transfer layer formation. Part number 4514-59032 is intended for complete axle service on both ends of the vehicle.
Quality Assurance
DFC GeoSpec rotors are 100% inspected for critical dimensions and balance, and each rotor includes a 12-month warranty against defects in material and workmanship. The brake pads are assembled with premium shims to support quieter operation and stable performance.
Brake Kit for 2009-2011 Honda Civic
The DFC Geospec Rotors with 5000 Advanced Brake Pads includes Hardware kit is a front and rear disc brake service solution for the 2009-2011 Honda Civic. Part number 4514-59032 combines coated rotors, advanced friction pads, and matching hardware for a complete brake refresh.
Built for the Honda Civic brake service market, this kit is designed to restore stopping performance, reduce brake noise, and simplify rotor and pad replacement on both axles.
Key Features
- Fits 2009-2011 Honda Civic, front and rear
- DFC GeoSpec coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Non-directional rotor finish for smoother pad bed-in
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4514-59032
Product Details
DFC 5000 Advanced Brake Pads are formulated for stable friction performance and consistent pedal response. The pads are post cured, then scorched to remove uncured bonding agents, which helps deliver stopping power from the first stop. DFC GeoSpec rotors are machined to tight tolerances from G3000/G11H18 cast iron, then finished for even pad contact and quieter operation. Each rotor is processed dry and ready to install, which helps reduce prep time during brake service. The included hardware is engineered to replace worn or corroded brake hardware that can contribute to uneven wear and caliper movement. This part number 4514-59032 is a direct-fit brake service kit for Honda Civic front and rear brake maintenance.
Common Brake Issues This Kit Addresses
- Brake noise during stops
- Pulsation or uneven braking feel from worn rotors
- Reduced stopping performance from aged pads
- Corroded or fatigued hardware causing caliper movement
- Uneven pad wear on the Honda Civic
Installation Notes
Fits 2009-2011 Honda Civic, front and rear. Inspect calipers, slides, and brake fluid condition before installation. Clean all mating surfaces, follow proper torque specifications, and bed in the pads according to the manufacturer procedure for even transfer layer formation. Part number 4514-59032 is intended for complete axle service on both ends of the vehicle.
Quality Assurance
DFC GeoSpec rotors are 100% inspected for critical dimensions and balance, and each rotor includes a 12-month warranty against defects in material and workmanship. The brake pads are assembled with premium shims to support quieter operation and stable performance.
Original: $243.84
-65%$243.84
$85.34Description
Brake Kit for 2009-2011 Honda Civic
The DFC Geospec Rotors with 5000 Advanced Brake Pads includes Hardware kit is a front and rear disc brake service solution for the 2009-2011 Honda Civic. Part number 4514-59032 combines coated rotors, advanced friction pads, and matching hardware for a complete brake refresh.
Built for the Honda Civic brake service market, this kit is designed to restore stopping performance, reduce brake noise, and simplify rotor and pad replacement on both axles.
Key Features
- Fits 2009-2011 Honda Civic, front and rear
- DFC GeoSpec coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Non-directional rotor finish for smoother pad bed-in
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4514-59032
Product Details
DFC 5000 Advanced Brake Pads are formulated for stable friction performance and consistent pedal response. The pads are post cured, then scorched to remove uncured bonding agents, which helps deliver stopping power from the first stop. DFC GeoSpec rotors are machined to tight tolerances from G3000/G11H18 cast iron, then finished for even pad contact and quieter operation. Each rotor is processed dry and ready to install, which helps reduce prep time during brake service. The included hardware is engineered to replace worn or corroded brake hardware that can contribute to uneven wear and caliper movement. This part number 4514-59032 is a direct-fit brake service kit for Honda Civic front and rear brake maintenance.
Common Brake Issues This Kit Addresses
- Brake noise during stops
- Pulsation or uneven braking feel from worn rotors
- Reduced stopping performance from aged pads
- Corroded or fatigued hardware causing caliper movement
- Uneven pad wear on the Honda Civic
Installation Notes
Fits 2009-2011 Honda Civic, front and rear. Inspect calipers, slides, and brake fluid condition before installation. Clean all mating surfaces, follow proper torque specifications, and bed in the pads according to the manufacturer procedure for even transfer layer formation. Part number 4514-59032 is intended for complete axle service on both ends of the vehicle.
Quality Assurance
DFC GeoSpec rotors are 100% inspected for critical dimensions and balance, and each rotor includes a 12-month warranty against defects in material and workmanship. The brake pads are assembled with premium shims to support quieter operation and stable performance.
