Dynamite Friction 4514-59030 Disc Brake Kit - Front and Rear
Brake Kit for Honda Pilot
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a front and rear disc brake kit for 2003-2008 Honda Pilot applications. Part number 4514-59030 combines coated rotors, ceramic brake pads, and matching hardware components in one service package for a complete brake refresh.
Key Features
- Fits 2003-2008 Honda Pilot, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4514-59030
Product Details
DFC GEOSPEC rotors are machined to OE-style tolerances from G3000/G11H18 cast iron and processed dry so they are ready to install without cleaning off oil residue. The coated surface helps resist rust better than conventional paint or zinc finishes, while the non-directional finish supports quieter stops and more consistent pad contact. The 5000 Advanced pads are formulated for stable friction performance and are assembled with premium shims to help reduce brake noise. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Addresses
- Brake pulsation from worn or uneven rotors
- Noise caused by fatigued or corroded hardware
- Reduced stopping performance from worn pads
- Rust buildup on exposed rotor surfaces
- Uneven pad wear and excessive caliper movement
Installation Notes
Compatible With 2003-2008 Honda Pilot front and rear brake service. Inspect calipers, slides, and brake fluid condition before installation. Clean all mating surfaces, follow the vehicle service manual for torque specifications, and bed in the pads according to standard brake-in procedure. Part number 4514-59030 is supplied as a complete brake service kit for the listed application.
Quality Assurance
DFC rotors are 100% inspected for critical dimensions and balance, and every rotor includes a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction characteristics, and the hardware is engineered to OE-style form, fit, and function.
Brake Kit for Honda Pilot
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a front and rear disc brake kit for 2003-2008 Honda Pilot applications. Part number 4514-59030 combines coated rotors, ceramic brake pads, and matching hardware components in one service package for a complete brake refresh.
Key Features
- Fits 2003-2008 Honda Pilot, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4514-59030
Product Details
DFC GEOSPEC rotors are machined to OE-style tolerances from G3000/G11H18 cast iron and processed dry so they are ready to install without cleaning off oil residue. The coated surface helps resist rust better than conventional paint or zinc finishes, while the non-directional finish supports quieter stops and more consistent pad contact. The 5000 Advanced pads are formulated for stable friction performance and are assembled with premium shims to help reduce brake noise. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Addresses
- Brake pulsation from worn or uneven rotors
- Noise caused by fatigued or corroded hardware
- Reduced stopping performance from worn pads
- Rust buildup on exposed rotor surfaces
- Uneven pad wear and excessive caliper movement
Installation Notes
Compatible With 2003-2008 Honda Pilot front and rear brake service. Inspect calipers, slides, and brake fluid condition before installation. Clean all mating surfaces, follow the vehicle service manual for torque specifications, and bed in the pads according to standard brake-in procedure. Part number 4514-59030 is supplied as a complete brake service kit for the listed application.
Quality Assurance
DFC rotors are 100% inspected for critical dimensions and balance, and every rotor includes a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction characteristics, and the hardware is engineered to OE-style form, fit, and function.
Original: $358.67
-65%$358.67
$125.53Description
Brake Kit for Honda Pilot
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a front and rear disc brake kit for 2003-2008 Honda Pilot applications. Part number 4514-59030 combines coated rotors, ceramic brake pads, and matching hardware components in one service package for a complete brake refresh.
Key Features
- Fits 2003-2008 Honda Pilot, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4514-59030
Product Details
DFC GEOSPEC rotors are machined to OE-style tolerances from G3000/G11H18 cast iron and processed dry so they are ready to install without cleaning off oil residue. The coated surface helps resist rust better than conventional paint or zinc finishes, while the non-directional finish supports quieter stops and more consistent pad contact. The 5000 Advanced pads are formulated for stable friction performance and are assembled with premium shims to help reduce brake noise. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Addresses
- Brake pulsation from worn or uneven rotors
- Noise caused by fatigued or corroded hardware
- Reduced stopping performance from worn pads
- Rust buildup on exposed rotor surfaces
- Uneven pad wear and excessive caliper movement
Installation Notes
Compatible With 2003-2008 Honda Pilot front and rear brake service. Inspect calipers, slides, and brake fluid condition before installation. Clean all mating surfaces, follow the vehicle service manual for torque specifications, and bed in the pads according to standard brake-in procedure. Part number 4514-59030 is supplied as a complete brake service kit for the listed application.
Quality Assurance
DFC rotors are 100% inspected for critical dimensions and balance, and every rotor includes a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction characteristics, and the hardware is engineered to OE-style form, fit, and function.
