Dynamite Friction 4514-59029 Disc Brake Kit - Front and Rear
Brake Kit for 2012-2016 Honda CR-V
This DFC brake kit combines GEOSPEC coated rotors, 5000 Advanced ceramic brake pads, and matching hardware for the front and rear of the 2012-2016 Honda CR-V. Part number 4514-59029 is built for drivers looking for an OE-style brake service kit with corrosion-resistant rotors and low-noise pad hardware.
Key Features
- Fits 2012-2016 Honda CR-V, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced break-in time and more immediate stopping response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Rotor castings are machined to tight tolerances and finished with a non-directional surface
- Part number 4514-59029
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware package is engineered as a complete brake service solution for the Honda CR-V. The rotors are processed dry and ready to install, which helps reduce prep time during brake service. Their coated surface is designed to resist rust better than conventional paint or zinc finishes, while the non-directional finish supports smoother pad bedding and quieter operation. The 5000 Advanced pads are formulated for stable friction performance and consistent pedal feel, and the included hardware is designed to restore proper caliper movement and spring tension. Part number 4514-59029 is a practical choice for a full front-and-rear brake refresh on the 2012-2016 Honda CR-V.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Reduced stopping performance from worn rotors and pads
- Rust buildup on exposed rotor surfaces
- Longer brake service time caused by uncoated, oil-covered rotors
Installation Notes
Verify rotor size, pad shape, and brake hardware before installation on your 2012-2016 Honda CR-V. Clean the hub surface thoroughly, follow proper torque specifications, and bed the pads according to standard brake service procedures. The coated rotor surface is designed to be swept away by the friction material during normal use. Part number 4514-59029 is intended for front and rear brake service on the listed application.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, with vented rotors electronically mill-balanced when required. The rotors are backed by a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction performance, and the hardware kit is built to OE-style form, fit, and function.
Brake Kit for 2012-2016 Honda CR-V
This DFC brake kit combines GEOSPEC coated rotors, 5000 Advanced ceramic brake pads, and matching hardware for the front and rear of the 2012-2016 Honda CR-V. Part number 4514-59029 is built for drivers looking for an OE-style brake service kit with corrosion-resistant rotors and low-noise pad hardware.
Key Features
- Fits 2012-2016 Honda CR-V, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced break-in time and more immediate stopping response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Rotor castings are machined to tight tolerances and finished with a non-directional surface
- Part number 4514-59029
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware package is engineered as a complete brake service solution for the Honda CR-V. The rotors are processed dry and ready to install, which helps reduce prep time during brake service. Their coated surface is designed to resist rust better than conventional paint or zinc finishes, while the non-directional finish supports smoother pad bedding and quieter operation. The 5000 Advanced pads are formulated for stable friction performance and consistent pedal feel, and the included hardware is designed to restore proper caliper movement and spring tension. Part number 4514-59029 is a practical choice for a full front-and-rear brake refresh on the 2012-2016 Honda CR-V.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Reduced stopping performance from worn rotors and pads
- Rust buildup on exposed rotor surfaces
- Longer brake service time caused by uncoated, oil-covered rotors
Installation Notes
Verify rotor size, pad shape, and brake hardware before installation on your 2012-2016 Honda CR-V. Clean the hub surface thoroughly, follow proper torque specifications, and bed the pads according to standard brake service procedures. The coated rotor surface is designed to be swept away by the friction material during normal use. Part number 4514-59029 is intended for front and rear brake service on the listed application.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, with vented rotors electronically mill-balanced when required. The rotors are backed by a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction performance, and the hardware kit is built to OE-style form, fit, and function.
Original: $315.57
-65%$315.57
$110.45Description
Brake Kit for 2012-2016 Honda CR-V
This DFC brake kit combines GEOSPEC coated rotors, 5000 Advanced ceramic brake pads, and matching hardware for the front and rear of the 2012-2016 Honda CR-V. Part number 4514-59029 is built for drivers looking for an OE-style brake service kit with corrosion-resistant rotors and low-noise pad hardware.
Key Features
- Fits 2012-2016 Honda CR-V, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced break-in time and more immediate stopping response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Rotor castings are machined to tight tolerances and finished with a non-directional surface
- Part number 4514-59029
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware package is engineered as a complete brake service solution for the Honda CR-V. The rotors are processed dry and ready to install, which helps reduce prep time during brake service. Their coated surface is designed to resist rust better than conventional paint or zinc finishes, while the non-directional finish supports smoother pad bedding and quieter operation. The 5000 Advanced pads are formulated for stable friction performance and consistent pedal feel, and the included hardware is designed to restore proper caliper movement and spring tension. Part number 4514-59029 is a practical choice for a full front-and-rear brake refresh on the 2012-2016 Honda CR-V.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Reduced stopping performance from worn rotors and pads
- Rust buildup on exposed rotor surfaces
- Longer brake service time caused by uncoated, oil-covered rotors
Installation Notes
Verify rotor size, pad shape, and brake hardware before installation on your 2012-2016 Honda CR-V. Clean the hub surface thoroughly, follow proper torque specifications, and bed the pads according to standard brake service procedures. The coated rotor surface is designed to be swept away by the friction material during normal use. Part number 4514-59029 is intended for front and rear brake service on the listed application.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, with vented rotors electronically mill-balanced when required. The rotors are backed by a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction performance, and the hardware kit is built to OE-style form, fit, and function.
