Dynamite Friction 4514-59017 Disc Brake Kit - Front and Rear
Brake Kit for 2003-2007 Honda Accord
This DFC brake kit combines GEOSPEC coated rotors, 5000 Advanced ceramic brake pads, and hardware for the front and rear of the 2003-2007 Honda Accord. It is built for drivers looking for an OE-style brake service kit with corrosion-resistant rotors and low-noise pad hardware.
Key Features
- Fits 2003-2007 Honda Accord, front and rear
- DFC GEOSPEC coated rotors with a silver-gray anti-rust finish
- Dry-processed rotors arrive ready to install
- G3000/G11H18 cast iron rotor construction for OE-style durability
- Non-directional rotor finish supports even pad bed-in and smoother braking
- DFC 5000 Advanced ceramic pads are post-cured and scorched for stable friction
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel materials
Product Details
Part number 4514-59017 is a complete disc brake kit for the Honda Accord brake service job. The rotor coating helps resist rust better than conventional paint or zinc finishes, while the machining and balance checks are aimed at consistent braking feel. The ceramic pad formulation is designed for stable friction performance and reduced break-in time, making this kit a practical choice for a 2003-2007 Honda Accord front and rear brake replacement. This part number 4514-59017 is also a straightforward option when replacing worn rotors, pads, and brake hardware together.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Rotor rust buildup on exposed braking surfaces
- Brake pulsation related to worn or out-of-spec rotors
- Reduced stopping consistency from aged friction materials
Installation Notes
Before installation, inspect calipers, slides, and brake hoses for wear or sticking. The rotors are shipped dry and ready to install, so no oil removal step is needed. Follow proper brake service procedures, torque specifications, and bedding instructions after installation to help the pads and rotors seat evenly.
Quality Assurance
DFC machines the rotors to tight tolerances and inspects critical dimensions to help ensure OE-spec fit and function. Vented rotors are balance-checked, and the rotors include a 12-month warranty against defects in material and workmanship.
Brake Kit for 2003-2007 Honda Accord
This DFC brake kit combines GEOSPEC coated rotors, 5000 Advanced ceramic brake pads, and hardware for the front and rear of the 2003-2007 Honda Accord. It is built for drivers looking for an OE-style brake service kit with corrosion-resistant rotors and low-noise pad hardware.
Key Features
- Fits 2003-2007 Honda Accord, front and rear
- DFC GEOSPEC coated rotors with a silver-gray anti-rust finish
- Dry-processed rotors arrive ready to install
- G3000/G11H18 cast iron rotor construction for OE-style durability
- Non-directional rotor finish supports even pad bed-in and smoother braking
- DFC 5000 Advanced ceramic pads are post-cured and scorched for stable friction
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel materials
Product Details
Part number 4514-59017 is a complete disc brake kit for the Honda Accord brake service job. The rotor coating helps resist rust better than conventional paint or zinc finishes, while the machining and balance checks are aimed at consistent braking feel. The ceramic pad formulation is designed for stable friction performance and reduced break-in time, making this kit a practical choice for a 2003-2007 Honda Accord front and rear brake replacement. This part number 4514-59017 is also a straightforward option when replacing worn rotors, pads, and brake hardware together.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Rotor rust buildup on exposed braking surfaces
- Brake pulsation related to worn or out-of-spec rotors
- Reduced stopping consistency from aged friction materials
Installation Notes
Before installation, inspect calipers, slides, and brake hoses for wear or sticking. The rotors are shipped dry and ready to install, so no oil removal step is needed. Follow proper brake service procedures, torque specifications, and bedding instructions after installation to help the pads and rotors seat evenly.
Quality Assurance
DFC machines the rotors to tight tolerances and inspects critical dimensions to help ensure OE-spec fit and function. Vented rotors are balance-checked, and the rotors include a 12-month warranty against defects in material and workmanship.
Original: $277.90
-65%$277.90
$97.26Description
Brake Kit for 2003-2007 Honda Accord
This DFC brake kit combines GEOSPEC coated rotors, 5000 Advanced ceramic brake pads, and hardware for the front and rear of the 2003-2007 Honda Accord. It is built for drivers looking for an OE-style brake service kit with corrosion-resistant rotors and low-noise pad hardware.
Key Features
- Fits 2003-2007 Honda Accord, front and rear
- DFC GEOSPEC coated rotors with a silver-gray anti-rust finish
- Dry-processed rotors arrive ready to install
- G3000/G11H18 cast iron rotor construction for OE-style durability
- Non-directional rotor finish supports even pad bed-in and smoother braking
- DFC 5000 Advanced ceramic pads are post-cured and scorched for stable friction
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel materials
Product Details
Part number 4514-59017 is a complete disc brake kit for the Honda Accord brake service job. The rotor coating helps resist rust better than conventional paint or zinc finishes, while the machining and balance checks are aimed at consistent braking feel. The ceramic pad formulation is designed for stable friction performance and reduced break-in time, making this kit a practical choice for a 2003-2007 Honda Accord front and rear brake replacement. This part number 4514-59017 is also a straightforward option when replacing worn rotors, pads, and brake hardware together.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Rotor rust buildup on exposed braking surfaces
- Brake pulsation related to worn or out-of-spec rotors
- Reduced stopping consistency from aged friction materials
Installation Notes
Before installation, inspect calipers, slides, and brake hoses for wear or sticking. The rotors are shipped dry and ready to install, so no oil removal step is needed. Follow proper brake service procedures, torque specifications, and bedding instructions after installation to help the pads and rotors seat evenly.
Quality Assurance
DFC machines the rotors to tight tolerances and inspects critical dimensions to help ensure OE-spec fit and function. Vented rotors are balance-checked, and the rotors include a 12-month warranty against defects in material and workmanship.
