Dynamite Friction 4514-59010 Disc Brake Kit - Front and Rear
Brake Kit for 1998-2002 Honda Accord
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for front and rear brake service on the 1998-2002 Honda Accord. Part number 4514-59010 combines coated rotors, ceramic brake pads, and matching brake hardware in one service kit for a complete brake refresh.
Key Features
- Fits 1998-2002 Honda Accord, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 5000 Advanced ceramic brake pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Brake hardware uses PTFE coating, vulcanized rubber, and stainless steel construction
- Part number 4514-59010 for easy identification
Product Details
This DFC brake service kit is engineered for drivers servicing a Honda Accord brake system with OE-style fit and finish. The rotors are made to G3000/G11H18 cast iron specifications, machined to tight tolerances, and inspected for balance and critical dimensions. The pads are formulated for consistent friction and reduced break-in time, while the hardware is designed to address wear, corrosion, and caliper movement that can affect braking feel. If you are searching for a 1998-2002 Honda Accord front and rear brake kit, 4514-59010 provides the core components needed for a full brake job.
Common Brake Issues This Kit Can Address
- Brake noise during stops
- Uneven pad wear or rotor wear
- Rust buildup on exposed rotor surfaces
- Reduced braking smoothness or pedal consistency
- Corroded or fatigued brake hardware
Installation Notes
Each rotor is processed dry and ready for installation, which helps reduce prep time during service. Clean all mating surfaces before assembly, inspect calipers and guide pins, and follow the vehicle manufacturer’s torque specifications. Proper pad bedding is recommended after installation to help establish even contact between the pads and rotors. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Quality Assurance
DFC GEOSPEC rotors are 100% inspected after machining, including balance checks on vented rotors, and each rotor is verified against OE specifications. The rotors include a 12-month warranty against defects in material and workmanship. DFC 5000 Advanced pads are post-cured and scorched for stable performance, and the hardware kit is built to OE-style form, fit, and function.
Brake Kit for 1998-2002 Honda Accord
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for front and rear brake service on the 1998-2002 Honda Accord. Part number 4514-59010 combines coated rotors, ceramic brake pads, and matching brake hardware in one service kit for a complete brake refresh.
Key Features
- Fits 1998-2002 Honda Accord, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 5000 Advanced ceramic brake pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Brake hardware uses PTFE coating, vulcanized rubber, and stainless steel construction
- Part number 4514-59010 for easy identification
Product Details
This DFC brake service kit is engineered for drivers servicing a Honda Accord brake system with OE-style fit and finish. The rotors are made to G3000/G11H18 cast iron specifications, machined to tight tolerances, and inspected for balance and critical dimensions. The pads are formulated for consistent friction and reduced break-in time, while the hardware is designed to address wear, corrosion, and caliper movement that can affect braking feel. If you are searching for a 1998-2002 Honda Accord front and rear brake kit, 4514-59010 provides the core components needed for a full brake job.
Common Brake Issues This Kit Can Address
- Brake noise during stops
- Uneven pad wear or rotor wear
- Rust buildup on exposed rotor surfaces
- Reduced braking smoothness or pedal consistency
- Corroded or fatigued brake hardware
Installation Notes
Each rotor is processed dry and ready for installation, which helps reduce prep time during service. Clean all mating surfaces before assembly, inspect calipers and guide pins, and follow the vehicle manufacturer’s torque specifications. Proper pad bedding is recommended after installation to help establish even contact between the pads and rotors. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Quality Assurance
DFC GEOSPEC rotors are 100% inspected after machining, including balance checks on vented rotors, and each rotor is verified against OE specifications. The rotors include a 12-month warranty against defects in material and workmanship. DFC 5000 Advanced pads are post-cured and scorched for stable performance, and the hardware kit is built to OE-style form, fit, and function.
Original: $270.31
-65%$270.31
$94.61Description
Brake Kit for 1998-2002 Honda Accord
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for front and rear brake service on the 1998-2002 Honda Accord. Part number 4514-59010 combines coated rotors, ceramic brake pads, and matching brake hardware in one service kit for a complete brake refresh.
Key Features
- Fits 1998-2002 Honda Accord, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 5000 Advanced ceramic brake pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Brake hardware uses PTFE coating, vulcanized rubber, and stainless steel construction
- Part number 4514-59010 for easy identification
Product Details
This DFC brake service kit is engineered for drivers servicing a Honda Accord brake system with OE-style fit and finish. The rotors are made to G3000/G11H18 cast iron specifications, machined to tight tolerances, and inspected for balance and critical dimensions. The pads are formulated for consistent friction and reduced break-in time, while the hardware is designed to address wear, corrosion, and caliper movement that can affect braking feel. If you are searching for a 1998-2002 Honda Accord front and rear brake kit, 4514-59010 provides the core components needed for a full brake job.
Common Brake Issues This Kit Can Address
- Brake noise during stops
- Uneven pad wear or rotor wear
- Rust buildup on exposed rotor surfaces
- Reduced braking smoothness or pedal consistency
- Corroded or fatigued brake hardware
Installation Notes
Each rotor is processed dry and ready for installation, which helps reduce prep time during service. Clean all mating surfaces before assembly, inspect calipers and guide pins, and follow the vehicle manufacturer’s torque specifications. Proper pad bedding is recommended after installation to help establish even contact between the pads and rotors. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Quality Assurance
DFC GEOSPEC rotors are 100% inspected after machining, including balance checks on vented rotors, and each rotor is verified against OE specifications. The rotors include a 12-month warranty against defects in material and workmanship. DFC 5000 Advanced pads are post-cured and scorched for stable performance, and the hardware kit is built to OE-style form, fit, and function.
