Dynamite Friction 4514-59009 Disc Brake Kit - Front and Rear
Brake Kit for 1998-2002 Honda Accord
This DFC brake kit combines GEOSPEC coated rotors, 5000 Advanced ceramic brake pads, and matching hardware for the front and rear of select Honda Accord models. It is built for drivers looking for a complete brake service solution for 1998-2002 Honda Accord applications, including part number 4514-59009.
Key Features
- Complete disc brake kit with rotors, pads, and hardware
- GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 5000 Advanced ceramic pads are post-cured and scorched for stable friction
- Premium rubber-steel-rubber shims help reduce noise and vibration
- Hardware uses PTFE coating, vulcanized rubber, and stainless steel construction
- Part number 4514-59009 for front and rear brake service on select Honda Accord vehicles
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware package is engineered for 1998-2002 Honda Accord front and rear brake service. The rotors are manufactured to OEM-style G3000/G11H18 cast iron specifications, machined to tight tolerances, and inspected for balance and critical dimensions. The coated surface helps resist rust, while the dry finish eliminates the need to clean oil from the rotor before installation. The ceramic pad formulation is designed for stable friction performance and consistent stopping response, and the included hardware is built to restore proper spring tension and caliper movement. If you are searching for 1998-2002 Honda Accord front and rear brake kit 4514-59009, this package brings the major wear components together in one service set.
What This Brake Kit Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven braking caused by rotor wear or inconsistent pad contact
- Rust buildup on exposed rotor surfaces
- Excessive caliper movement from corroded or weakened hardware
- Reduced stopping performance from worn friction materials
Installation Notes and Tips
Fits 1998-2002 Honda Accord, front and rear. Before installation, confirm rotor size and brake configuration against the vehicle’s existing setup. Clean the hub mounting surface, inspect calipers and slides, and follow proper bedding procedures after installation to help the pads and rotors seat evenly. Part number 4514-59009 is intended for direct brake service on the listed Honda Accord applications.
Quality Assurance
DFC rotors are inspected for balance and critical dimensions, and each rotor is backed by a 12-month warranty against defects in material and workmanship. The pads are post-cured and scorched for stable friction performance, and the hardware is designed with OE-style form, fit, and function in mind.
Brake Kit for 1998-2002 Honda Accord
This DFC brake kit combines GEOSPEC coated rotors, 5000 Advanced ceramic brake pads, and matching hardware for the front and rear of select Honda Accord models. It is built for drivers looking for a complete brake service solution for 1998-2002 Honda Accord applications, including part number 4514-59009.
Key Features
- Complete disc brake kit with rotors, pads, and hardware
- GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 5000 Advanced ceramic pads are post-cured and scorched for stable friction
- Premium rubber-steel-rubber shims help reduce noise and vibration
- Hardware uses PTFE coating, vulcanized rubber, and stainless steel construction
- Part number 4514-59009 for front and rear brake service on select Honda Accord vehicles
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware package is engineered for 1998-2002 Honda Accord front and rear brake service. The rotors are manufactured to OEM-style G3000/G11H18 cast iron specifications, machined to tight tolerances, and inspected for balance and critical dimensions. The coated surface helps resist rust, while the dry finish eliminates the need to clean oil from the rotor before installation. The ceramic pad formulation is designed for stable friction performance and consistent stopping response, and the included hardware is built to restore proper spring tension and caliper movement. If you are searching for 1998-2002 Honda Accord front and rear brake kit 4514-59009, this package brings the major wear components together in one service set.
What This Brake Kit Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven braking caused by rotor wear or inconsistent pad contact
- Rust buildup on exposed rotor surfaces
- Excessive caliper movement from corroded or weakened hardware
- Reduced stopping performance from worn friction materials
Installation Notes and Tips
Fits 1998-2002 Honda Accord, front and rear. Before installation, confirm rotor size and brake configuration against the vehicle’s existing setup. Clean the hub mounting surface, inspect calipers and slides, and follow proper bedding procedures after installation to help the pads and rotors seat evenly. Part number 4514-59009 is intended for direct brake service on the listed Honda Accord applications.
Quality Assurance
DFC rotors are inspected for balance and critical dimensions, and each rotor is backed by a 12-month warranty against defects in material and workmanship. The pads are post-cured and scorched for stable friction performance, and the hardware is designed with OE-style form, fit, and function in mind.
Original: $268.11
-65%$268.11
$93.84Description
Brake Kit for 1998-2002 Honda Accord
This DFC brake kit combines GEOSPEC coated rotors, 5000 Advanced ceramic brake pads, and matching hardware for the front and rear of select Honda Accord models. It is built for drivers looking for a complete brake service solution for 1998-2002 Honda Accord applications, including part number 4514-59009.
Key Features
- Complete disc brake kit with rotors, pads, and hardware
- GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 5000 Advanced ceramic pads are post-cured and scorched for stable friction
- Premium rubber-steel-rubber shims help reduce noise and vibration
- Hardware uses PTFE coating, vulcanized rubber, and stainless steel construction
- Part number 4514-59009 for front and rear brake service on select Honda Accord vehicles
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware package is engineered for 1998-2002 Honda Accord front and rear brake service. The rotors are manufactured to OEM-style G3000/G11H18 cast iron specifications, machined to tight tolerances, and inspected for balance and critical dimensions. The coated surface helps resist rust, while the dry finish eliminates the need to clean oil from the rotor before installation. The ceramic pad formulation is designed for stable friction performance and consistent stopping response, and the included hardware is built to restore proper spring tension and caliper movement. If you are searching for 1998-2002 Honda Accord front and rear brake kit 4514-59009, this package brings the major wear components together in one service set.
What This Brake Kit Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven braking caused by rotor wear or inconsistent pad contact
- Rust buildup on exposed rotor surfaces
- Excessive caliper movement from corroded or weakened hardware
- Reduced stopping performance from worn friction materials
Installation Notes and Tips
Fits 1998-2002 Honda Accord, front and rear. Before installation, confirm rotor size and brake configuration against the vehicle’s existing setup. Clean the hub mounting surface, inspect calipers and slides, and follow proper bedding procedures after installation to help the pads and rotors seat evenly. Part number 4514-59009 is intended for direct brake service on the listed Honda Accord applications.
Quality Assurance
DFC rotors are inspected for balance and critical dimensions, and each rotor is backed by a 12-month warranty against defects in material and workmanship. The pads are post-cured and scorched for stable friction performance, and the hardware is designed with OE-style form, fit, and function in mind.
