Dynamite Friction 4514-56001 Disc Brake Kit - Front and Rear
Brake Kit for Crown Victoria, Town Car, and Grand Marquis
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Semi Metallic and Hardware Kit is a complete disc brake kit for front and rear service on select Ford, Lincoln, and Mercury applications. Part number 4514-56001 combines coated rotors, semi-metallic pads, and matched brake hardware for a direct-service brake repair.
- Compatible with 1998-2002 Ford Crown Victoria, front and rear, with steel piston rear calipers
- Compatible with 1998-2002 Lincoln Town Car, front and rear, with steel piston calipers
- Compatible with 1998-2002 Mercury Grand Marquis, front and rear, with steel piston calipers
- GEOSPEC coated rotors are dry processed and ready to install
- Rotor finish helps resist rust and supports quieter, smoother braking
- G3000/G11H18 cast iron construction engineered to OE specifications
- 5000 Advanced semi-metallic pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Line Details
DFC GEOSPEC Coated Rotors are machined to tight tolerances, finished with a non-directional surface, and inspected for balance and critical dimensions. The 5000 Advanced Brake Pads are formulated for consistent friction across a wide range of vehicle applications, while the hardware kit is built to restore proper caliper movement and spring tension during brake service.
Detailed Application Notes
Use this brake kit when servicing front and rear brakes on 1998-2002 Ford Crown Victoria, 1998-2002 Lincoln Town Car, or 1998-2002 Mercury Grand Marquis. Part number 4514-56001 is a practical choice for drivers looking for a complete brake refresh on these full-size rear-wheel-drive sedans.
What This Brake Kit Helps Address
- Rust buildup on rotor surfaces
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Longer stopping distances from worn friction components
- Rotor vibration related to uneven wear or poor surface finish
Installation Notes and Tips
Before installation, confirm caliper type and axle position against the vehicle listing. The coated rotors are shipped dry and do not require cleaning before service. Proper pad bedding after installation helps establish even contact and stable braking performance.
Quality Assurance
Each rotor is inspected for critical dimensions and balance, and all vented rotors are electronically mill-balanced when needed. DFC states that the rotors carry a 12-month warranty against defects in material and workmanship.
Brake Kit for Crown Victoria, Town Car, and Grand Marquis
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Semi Metallic and Hardware Kit is a complete disc brake kit for front and rear service on select Ford, Lincoln, and Mercury applications. Part number 4514-56001 combines coated rotors, semi-metallic pads, and matched brake hardware for a direct-service brake repair.
- Compatible with 1998-2002 Ford Crown Victoria, front and rear, with steel piston rear calipers
- Compatible with 1998-2002 Lincoln Town Car, front and rear, with steel piston calipers
- Compatible with 1998-2002 Mercury Grand Marquis, front and rear, with steel piston calipers
- GEOSPEC coated rotors are dry processed and ready to install
- Rotor finish helps resist rust and supports quieter, smoother braking
- G3000/G11H18 cast iron construction engineered to OE specifications
- 5000 Advanced semi-metallic pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Line Details
DFC GEOSPEC Coated Rotors are machined to tight tolerances, finished with a non-directional surface, and inspected for balance and critical dimensions. The 5000 Advanced Brake Pads are formulated for consistent friction across a wide range of vehicle applications, while the hardware kit is built to restore proper caliper movement and spring tension during brake service.
Detailed Application Notes
Use this brake kit when servicing front and rear brakes on 1998-2002 Ford Crown Victoria, 1998-2002 Lincoln Town Car, or 1998-2002 Mercury Grand Marquis. Part number 4514-56001 is a practical choice for drivers looking for a complete brake refresh on these full-size rear-wheel-drive sedans.
What This Brake Kit Helps Address
- Rust buildup on rotor surfaces
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Longer stopping distances from worn friction components
- Rotor vibration related to uneven wear or poor surface finish
Installation Notes and Tips
Before installation, confirm caliper type and axle position against the vehicle listing. The coated rotors are shipped dry and do not require cleaning before service. Proper pad bedding after installation helps establish even contact and stable braking performance.
Quality Assurance
Each rotor is inspected for critical dimensions and balance, and all vented rotors are electronically mill-balanced when needed. DFC states that the rotors carry a 12-month warranty against defects in material and workmanship.
Original: $368.85
-65%$368.85
$129.10Description
Brake Kit for Crown Victoria, Town Car, and Grand Marquis
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Semi Metallic and Hardware Kit is a complete disc brake kit for front and rear service on select Ford, Lincoln, and Mercury applications. Part number 4514-56001 combines coated rotors, semi-metallic pads, and matched brake hardware for a direct-service brake repair.
- Compatible with 1998-2002 Ford Crown Victoria, front and rear, with steel piston rear calipers
- Compatible with 1998-2002 Lincoln Town Car, front and rear, with steel piston calipers
- Compatible with 1998-2002 Mercury Grand Marquis, front and rear, with steel piston calipers
- GEOSPEC coated rotors are dry processed and ready to install
- Rotor finish helps resist rust and supports quieter, smoother braking
- G3000/G11H18 cast iron construction engineered to OE specifications
- 5000 Advanced semi-metallic pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Line Details
DFC GEOSPEC Coated Rotors are machined to tight tolerances, finished with a non-directional surface, and inspected for balance and critical dimensions. The 5000 Advanced Brake Pads are formulated for consistent friction across a wide range of vehicle applications, while the hardware kit is built to restore proper caliper movement and spring tension during brake service.
Detailed Application Notes
Use this brake kit when servicing front and rear brakes on 1998-2002 Ford Crown Victoria, 1998-2002 Lincoln Town Car, or 1998-2002 Mercury Grand Marquis. Part number 4514-56001 is a practical choice for drivers looking for a complete brake refresh on these full-size rear-wheel-drive sedans.
What This Brake Kit Helps Address
- Rust buildup on rotor surfaces
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Longer stopping distances from worn friction components
- Rotor vibration related to uneven wear or poor surface finish
Installation Notes and Tips
Before installation, confirm caliper type and axle position against the vehicle listing. The coated rotors are shipped dry and do not require cleaning before service. Proper pad bedding after installation helps establish even contact and stable braking performance.
Quality Assurance
Each rotor is inspected for critical dimensions and balance, and all vented rotors are electronically mill-balanced when needed. DFC states that the rotors carry a 12-month warranty against defects in material and workmanship.
