Dynamite Friction 4514-54214 Disc Brake Pad and Rotor / Drum Brake Shoe and Drum Kit - Front and Rear
Brake Kit for Ranger and B4000
The DFC Geospec Rotors with 5000 Advanced Brake Pads kit is built for front and rear brake service on select Ford Ranger and Mazda B-Series trucks. Part number 4514-54214 combines coated rotors, advanced friction pads, and matching drum brake components for a complete brake refresh on the listed applications.
Key Features
- DFC 5000 Advanced brake pads with post-cured friction material for stable performance
- Scorched pad surface to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray finish that resists rust better than conventional coatings
- Dry-processed, ready-to-install rotors with no oil removal step before installation
- G3000/G11H18 cast iron rotor construction machined to OE-style tolerances
- Non-directional rotor finish for more even pad bed-in and smoother braking
- DFC drum shoes and drum components included for rear brake service on applicable vehicles
Product Details
DFC’s 4514-54214 brake kit is engineered for 2003-2009 Ford Ranger, 2003-2009 Mazda B4000, and 2005 Mazda B3000 applications with 10 inch rear drums. The DFC Geospec rotor design uses a corrosion-resistant coating and precision machining to support consistent braking performance, while the 5000 Advanced pads are formulated for stable friction and quieter operation. This kit is a practical choice for drivers servicing a Ford Ranger brake kit or Mazda B4000 brake kit that needs both front disc and rear drum components addressed in one order. Part number 4514-54214 is also a useful reference when searching for a complete brake service kit for these trucks.
What It Helps Address
- Brake noise from worn pads, shims, or fatigued hardware surfaces
- Uneven braking feel caused by rotor wear or inconsistent friction material
- Rust buildup on exposed rotor surfaces
- Longer stopping distances from worn brake components
- Rear drum brake wear on vehicles with 10 inch rear drums
Installation Notes and Tips
Verify axle position and rear drum size before ordering. This kit is listed for front and rear service on the specified Ranger and Mazda B-Series applications, so confirm the vehicle year, model, and brake configuration against the fitment data. Clean installation surfaces before assembly, and follow standard brake bedding procedures after installation to help the pads and rotors seat evenly.
Quality Assurance
DFC processes its brake pads with post-curing and scorching steps to promote consistent friction characteristics, and the rotors are machined, balanced where required, and inspected for critical dimensions before release. Each rotor includes a 12-month warranty against defects in material and workmanship. Part number 4514-54214 reflects a complete brake service solution for the listed Ford Ranger and Mazda B4000/Mazda B3000 applications.
Brake Kit for Ranger and B4000
The DFC Geospec Rotors with 5000 Advanced Brake Pads kit is built for front and rear brake service on select Ford Ranger and Mazda B-Series trucks. Part number 4514-54214 combines coated rotors, advanced friction pads, and matching drum brake components for a complete brake refresh on the listed applications.
Key Features
- DFC 5000 Advanced brake pads with post-cured friction material for stable performance
- Scorched pad surface to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray finish that resists rust better than conventional coatings
- Dry-processed, ready-to-install rotors with no oil removal step before installation
- G3000/G11H18 cast iron rotor construction machined to OE-style tolerances
- Non-directional rotor finish for more even pad bed-in and smoother braking
- DFC drum shoes and drum components included for rear brake service on applicable vehicles
Product Details
DFC’s 4514-54214 brake kit is engineered for 2003-2009 Ford Ranger, 2003-2009 Mazda B4000, and 2005 Mazda B3000 applications with 10 inch rear drums. The DFC Geospec rotor design uses a corrosion-resistant coating and precision machining to support consistent braking performance, while the 5000 Advanced pads are formulated for stable friction and quieter operation. This kit is a practical choice for drivers servicing a Ford Ranger brake kit or Mazda B4000 brake kit that needs both front disc and rear drum components addressed in one order. Part number 4514-54214 is also a useful reference when searching for a complete brake service kit for these trucks.
What It Helps Address
- Brake noise from worn pads, shims, or fatigued hardware surfaces
- Uneven braking feel caused by rotor wear or inconsistent friction material
- Rust buildup on exposed rotor surfaces
- Longer stopping distances from worn brake components
- Rear drum brake wear on vehicles with 10 inch rear drums
Installation Notes and Tips
Verify axle position and rear drum size before ordering. This kit is listed for front and rear service on the specified Ranger and Mazda B-Series applications, so confirm the vehicle year, model, and brake configuration against the fitment data. Clean installation surfaces before assembly, and follow standard brake bedding procedures after installation to help the pads and rotors seat evenly.
Quality Assurance
DFC processes its brake pads with post-curing and scorching steps to promote consistent friction characteristics, and the rotors are machined, balanced where required, and inspected for critical dimensions before release. Each rotor includes a 12-month warranty against defects in material and workmanship. Part number 4514-54214 reflects a complete brake service solution for the listed Ford Ranger and Mazda B4000/Mazda B3000 applications.
Original: $419.61
-65%$419.61
$146.86Description
Brake Kit for Ranger and B4000
The DFC Geospec Rotors with 5000 Advanced Brake Pads kit is built for front and rear brake service on select Ford Ranger and Mazda B-Series trucks. Part number 4514-54214 combines coated rotors, advanced friction pads, and matching drum brake components for a complete brake refresh on the listed applications.
Key Features
- DFC 5000 Advanced brake pads with post-cured friction material for stable performance
- Scorched pad surface to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray finish that resists rust better than conventional coatings
- Dry-processed, ready-to-install rotors with no oil removal step before installation
- G3000/G11H18 cast iron rotor construction machined to OE-style tolerances
- Non-directional rotor finish for more even pad bed-in and smoother braking
- DFC drum shoes and drum components included for rear brake service on applicable vehicles
Product Details
DFC’s 4514-54214 brake kit is engineered for 2003-2009 Ford Ranger, 2003-2009 Mazda B4000, and 2005 Mazda B3000 applications with 10 inch rear drums. The DFC Geospec rotor design uses a corrosion-resistant coating and precision machining to support consistent braking performance, while the 5000 Advanced pads are formulated for stable friction and quieter operation. This kit is a practical choice for drivers servicing a Ford Ranger brake kit or Mazda B4000 brake kit that needs both front disc and rear drum components addressed in one order. Part number 4514-54214 is also a useful reference when searching for a complete brake service kit for these trucks.
What It Helps Address
- Brake noise from worn pads, shims, or fatigued hardware surfaces
- Uneven braking feel caused by rotor wear or inconsistent friction material
- Rust buildup on exposed rotor surfaces
- Longer stopping distances from worn brake components
- Rear drum brake wear on vehicles with 10 inch rear drums
Installation Notes and Tips
Verify axle position and rear drum size before ordering. This kit is listed for front and rear service on the specified Ranger and Mazda B-Series applications, so confirm the vehicle year, model, and brake configuration against the fitment data. Clean installation surfaces before assembly, and follow standard brake bedding procedures after installation to help the pads and rotors seat evenly.
Quality Assurance
DFC processes its brake pads with post-curing and scorching steps to promote consistent friction characteristics, and the rotors are machined, balanced where required, and inspected for critical dimensions before release. Each rotor includes a 12-month warranty against defects in material and workmanship. Part number 4514-54214 reflects a complete brake service solution for the listed Ford Ranger and Mazda B4000/Mazda B3000 applications.
