Dynamite Friction 4514-54136 Disc Brake Kit - Front and Rear
Brake Kit for Ford Taurus Performance Package
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Low Metallic and Hardware Kit is a complete disc brake kit for the front and rear of select Ford Taurus models. It combines coated rotors, low metallic pads, and matching hardware for a service-focused brake replacement on 2011-2012 Ford Taurus vehicles with the Performance Package.
Key Features
- Fits 2011-2012 Ford Taurus, front and rear, with Performance Package
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish supports even pad bed-in and smoother braking
- DFC 5000 Advanced low metallic brake pads with post-cured friction material
- Scorched pads help reduce initial break-in time
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
Built for the 2011-2012 Ford Taurus Performance Package application, this DFC brake kit is designed to replace worn rotors, pads, and brake hardware in one service. The GEOSPEC coated rotors are machined to tight tolerances, inspected for critical dimensions, and balanced where required to support consistent braking performance. The low metallic pad formulation is engineered for stable friction and quieter operation, while the included hardware kit addresses common wear points that can contribute to caliper movement, uneven pad wear, and brake noise. Part number 4514-54136 is a practical choice for drivers servicing a Ford Taurus front and rear brake system with OE-style fit and finish. Part number 4514-54136 is also a useful reference when ordering the correct brake kit for this specific Taurus configuration.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven braking feel from worn or out-of-spec rotors
- Reduced stopping performance from aged friction material
- Caliper movement or pad wear caused by corroded hardware
Installation Notes and Tips
Compatible With 2011-2012 Ford Taurus, front and rear, Performance Package. Verify rotor size, brake package details, and axle position before installation. The coated rotor surface is processed dry and does not require cleaning before service; the coating is removed naturally by the brake pads during normal use. Follow standard brake service procedures, inspect calipers and guide components, and bed in the pads according to the friction material manufacturer’s recommendations.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications, inspected for critical attributes, and covered by a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and scorched for stable friction performance, and the hardware kit is built with OE-style attention to form, fit, and function.
Brake Kit for Ford Taurus Performance Package
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Low Metallic and Hardware Kit is a complete disc brake kit for the front and rear of select Ford Taurus models. It combines coated rotors, low metallic pads, and matching hardware for a service-focused brake replacement on 2011-2012 Ford Taurus vehicles with the Performance Package.
Key Features
- Fits 2011-2012 Ford Taurus, front and rear, with Performance Package
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish supports even pad bed-in and smoother braking
- DFC 5000 Advanced low metallic brake pads with post-cured friction material
- Scorched pads help reduce initial break-in time
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
Built for the 2011-2012 Ford Taurus Performance Package application, this DFC brake kit is designed to replace worn rotors, pads, and brake hardware in one service. The GEOSPEC coated rotors are machined to tight tolerances, inspected for critical dimensions, and balanced where required to support consistent braking performance. The low metallic pad formulation is engineered for stable friction and quieter operation, while the included hardware kit addresses common wear points that can contribute to caliper movement, uneven pad wear, and brake noise. Part number 4514-54136 is a practical choice for drivers servicing a Ford Taurus front and rear brake system with OE-style fit and finish. Part number 4514-54136 is also a useful reference when ordering the correct brake kit for this specific Taurus configuration.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven braking feel from worn or out-of-spec rotors
- Reduced stopping performance from aged friction material
- Caliper movement or pad wear caused by corroded hardware
Installation Notes and Tips
Compatible With 2011-2012 Ford Taurus, front and rear, Performance Package. Verify rotor size, brake package details, and axle position before installation. The coated rotor surface is processed dry and does not require cleaning before service; the coating is removed naturally by the brake pads during normal use. Follow standard brake service procedures, inspect calipers and guide components, and bed in the pads according to the friction material manufacturer’s recommendations.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications, inspected for critical attributes, and covered by a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and scorched for stable friction performance, and the hardware kit is built with OE-style attention to form, fit, and function.
Original: $413.57
-65%$413.57
$144.75Description
Brake Kit for Ford Taurus Performance Package
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Low Metallic and Hardware Kit is a complete disc brake kit for the front and rear of select Ford Taurus models. It combines coated rotors, low metallic pads, and matching hardware for a service-focused brake replacement on 2011-2012 Ford Taurus vehicles with the Performance Package.
Key Features
- Fits 2011-2012 Ford Taurus, front and rear, with Performance Package
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish supports even pad bed-in and smoother braking
- DFC 5000 Advanced low metallic brake pads with post-cured friction material
- Scorched pads help reduce initial break-in time
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
Built for the 2011-2012 Ford Taurus Performance Package application, this DFC brake kit is designed to replace worn rotors, pads, and brake hardware in one service. The GEOSPEC coated rotors are machined to tight tolerances, inspected for critical dimensions, and balanced where required to support consistent braking performance. The low metallic pad formulation is engineered for stable friction and quieter operation, while the included hardware kit addresses common wear points that can contribute to caliper movement, uneven pad wear, and brake noise. Part number 4514-54136 is a practical choice for drivers servicing a Ford Taurus front and rear brake system with OE-style fit and finish. Part number 4514-54136 is also a useful reference when ordering the correct brake kit for this specific Taurus configuration.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven braking feel from worn or out-of-spec rotors
- Reduced stopping performance from aged friction material
- Caliper movement or pad wear caused by corroded hardware
Installation Notes and Tips
Compatible With 2011-2012 Ford Taurus, front and rear, Performance Package. Verify rotor size, brake package details, and axle position before installation. The coated rotor surface is processed dry and does not require cleaning before service; the coating is removed naturally by the brake pads during normal use. Follow standard brake service procedures, inspect calipers and guide components, and bed in the pads according to the friction material manufacturer’s recommendations.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications, inspected for critical attributes, and covered by a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and scorched for stable friction performance, and the hardware kit is built with OE-style attention to form, fit, and function.
