Dynamite Friction 4514-54131 Disc Brake Kit - Front and Rear
Brake Kit for Ford Mustang Performance Applications
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a front and rear disc brake kit built for select Ford Mustang performance-brake applications. Part number 4514-54131 combines coated rotors, low metallic pads, and matching hardware in one service package for a cleaner brake job.
Key Features
- Complete disc brake kit for front and rear service
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced low metallic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time and stronger first-stop response
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Hardware kit included for OE-style brake service
Product Details
DFC’s 5000 Advanced pad formulation is engineered for consistent friction performance across demanding passenger car and light truck brake systems. The pads are post cured, then scorched to remove uncured bonding agents, helping deliver stable braking characteristics from the first stop. On the rotor side, the GEOSPEC coating is applied to help resist rust while arriving dry and ready to install. The rotors are machined to tight tolerances, finished for even pad contact, and inspected for balance and critical dimensions.
This part number, 4514-54131, is a practical choice for Ford Mustang owners servicing performance brake setups. It is listed for 2011 Ford Mustang with Brembo Front Performance Brake Package, 2012 Ford Mustang with Brembo Front Performance Brakes, and 2013-2014 Ford Mustang with Performance Brakes. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Rust buildup on exposed rotor surfaces
- Longer brake service time from oil-coated replacement rotors
- Reduced initial braking response after pad replacement
Installation Notes
Compatible With select Ford Mustang front and rear brake service applications. Verify brake package details before ordering, especially on 2011-2012 models with Brembo equipment and 2013-2014 models with Performance Brakes. The rotors are shipped dry and ready to install, which can reduce prep time during service. Follow standard brake service procedures, clean all mating surfaces, and inspect caliper components before assembly.
Quality Assurance
DFC machines the rotors to OE-style specifications, applies a non-directional finish, and performs inspection checks on critical dimensions and balance. The rotors carry a 12-month warranty against defects in material and workmanship. Part number 4514-54131 is built as a service kit for consistent fitment and dependable brake performance.
Brake Kit for Ford Mustang Performance Applications
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a front and rear disc brake kit built for select Ford Mustang performance-brake applications. Part number 4514-54131 combines coated rotors, low metallic pads, and matching hardware in one service package for a cleaner brake job.
Key Features
- Complete disc brake kit for front and rear service
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced low metallic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time and stronger first-stop response
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Hardware kit included for OE-style brake service
Product Details
DFC’s 5000 Advanced pad formulation is engineered for consistent friction performance across demanding passenger car and light truck brake systems. The pads are post cured, then scorched to remove uncured bonding agents, helping deliver stable braking characteristics from the first stop. On the rotor side, the GEOSPEC coating is applied to help resist rust while arriving dry and ready to install. The rotors are machined to tight tolerances, finished for even pad contact, and inspected for balance and critical dimensions.
This part number, 4514-54131, is a practical choice for Ford Mustang owners servicing performance brake setups. It is listed for 2011 Ford Mustang with Brembo Front Performance Brake Package, 2012 Ford Mustang with Brembo Front Performance Brakes, and 2013-2014 Ford Mustang with Performance Brakes. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Rust buildup on exposed rotor surfaces
- Longer brake service time from oil-coated replacement rotors
- Reduced initial braking response after pad replacement
Installation Notes
Compatible With select Ford Mustang front and rear brake service applications. Verify brake package details before ordering, especially on 2011-2012 models with Brembo equipment and 2013-2014 models with Performance Brakes. The rotors are shipped dry and ready to install, which can reduce prep time during service. Follow standard brake service procedures, clean all mating surfaces, and inspect caliper components before assembly.
Quality Assurance
DFC machines the rotors to OE-style specifications, applies a non-directional finish, and performs inspection checks on critical dimensions and balance. The rotors carry a 12-month warranty against defects in material and workmanship. Part number 4514-54131 is built as a service kit for consistent fitment and dependable brake performance.
Original: $413.11
-65%$413.11
$144.59Description
Brake Kit for Ford Mustang Performance Applications
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a front and rear disc brake kit built for select Ford Mustang performance-brake applications. Part number 4514-54131 combines coated rotors, low metallic pads, and matching hardware in one service package for a cleaner brake job.
Key Features
- Complete disc brake kit for front and rear service
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced low metallic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time and stronger first-stop response
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Hardware kit included for OE-style brake service
Product Details
DFC’s 5000 Advanced pad formulation is engineered for consistent friction performance across demanding passenger car and light truck brake systems. The pads are post cured, then scorched to remove uncured bonding agents, helping deliver stable braking characteristics from the first stop. On the rotor side, the GEOSPEC coating is applied to help resist rust while arriving dry and ready to install. The rotors are machined to tight tolerances, finished for even pad contact, and inspected for balance and critical dimensions.
This part number, 4514-54131, is a practical choice for Ford Mustang owners servicing performance brake setups. It is listed for 2011 Ford Mustang with Brembo Front Performance Brake Package, 2012 Ford Mustang with Brembo Front Performance Brakes, and 2013-2014 Ford Mustang with Performance Brakes. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Rust buildup on exposed rotor surfaces
- Longer brake service time from oil-coated replacement rotors
- Reduced initial braking response after pad replacement
Installation Notes
Compatible With select Ford Mustang front and rear brake service applications. Verify brake package details before ordering, especially on 2011-2012 models with Brembo equipment and 2013-2014 models with Performance Brakes. The rotors are shipped dry and ready to install, which can reduce prep time during service. Follow standard brake service procedures, clean all mating surfaces, and inspect caliper components before assembly.
Quality Assurance
DFC machines the rotors to OE-style specifications, applies a non-directional finish, and performs inspection checks on critical dimensions and balance. The rotors carry a 12-month warranty against defects in material and workmanship. Part number 4514-54131 is built as a service kit for consistent fitment and dependable brake performance.
