Dynamite Friction 4514-54111 Disc Brake Kit - Front and Rear
Brake Kit for Mustang Performance Brakes
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a front and rear disc brake kit built for select Ford Mustang performance brake applications. Part number 4514-54111 combines coated rotors, low metallic pads, and matching hardware for a complete brake service package.
Compatible With 2015-2022 Ford Mustang models equipped with Brembo performance brakes, this kit is aimed at drivers who want OE-style fitment, corrosion protection, and consistent braking response. The DFC GEOSPEC rotor finish helps resist rust, while the 5000 Advanced pads are formulated for stable friction and quieter operation.
Key Features
- Part number 4514-54111
- Front and rear disc brake kit for select Ford Mustang performance brake setups
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors ship ready to install
- G3000/G11H18 cast iron rotor construction
- Non-directional rotor finish for smoother pad bed-in
- DFC 5000 Advanced low metallic brake pads
- Post-cured and scorched pads for stable friction performance
- Premium rubber-steel-rubber shims for improved NVH control
- Hardware kit included for the listed applications
Product Details
DFC GEOSPEC rotors are machined to tight tolerances, finished for even pad contact, and inspected for balance and critical dimensions. The coating is designed to fight corrosion better than conventional paint or zinc finishes, and it is swept away naturally during braking. The 5000 Advanced pads are built for controlled stopping performance and reduced noise, while the included hardware kit uses PTFE coating, vulcanized rubber, and stainless steel for OE-style form and function. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Can Address
- Rusty or worn rotors on a Ford Mustang Brembo brake package
- Brake noise from fatigued or corroded hardware
- Uneven pad wear caused by worn brake hardware
- Reduced braking consistency from aged pads and rotors
- Longer service time from rotors that require extra prep before installation
Installation Notes
Fits 2015-2017 Ford Mustang, front and rear, with Brembo Package (6-Piston Front Calipers). Fits 2018-2021 Ford Mustang, front and rear, with Performance Brakes (Brembo 6-Piston Front Calipers). Fits 2022 Ford Mustang, front and rear, with Performance Brakes (Brembo 6-Piston Front Calipers). Verify caliper package and brake configuration before ordering. Follow proper brake service procedures, clean all mating surfaces, and bed in the pads according to the manufacturer’s instructions.
Quality Assurance
DFC rotors are manufactured to OE specifications, inspected for balance and critical dimensions, and backed by a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable performance, and the hardware kit is engineered to match original equipment form, fit, and function.
Brake Kit for Mustang Performance Brakes
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a front and rear disc brake kit built for select Ford Mustang performance brake applications. Part number 4514-54111 combines coated rotors, low metallic pads, and matching hardware for a complete brake service package.
Compatible With 2015-2022 Ford Mustang models equipped with Brembo performance brakes, this kit is aimed at drivers who want OE-style fitment, corrosion protection, and consistent braking response. The DFC GEOSPEC rotor finish helps resist rust, while the 5000 Advanced pads are formulated for stable friction and quieter operation.
Key Features
- Part number 4514-54111
- Front and rear disc brake kit for select Ford Mustang performance brake setups
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors ship ready to install
- G3000/G11H18 cast iron rotor construction
- Non-directional rotor finish for smoother pad bed-in
- DFC 5000 Advanced low metallic brake pads
- Post-cured and scorched pads for stable friction performance
- Premium rubber-steel-rubber shims for improved NVH control
- Hardware kit included for the listed applications
Product Details
DFC GEOSPEC rotors are machined to tight tolerances, finished for even pad contact, and inspected for balance and critical dimensions. The coating is designed to fight corrosion better than conventional paint or zinc finishes, and it is swept away naturally during braking. The 5000 Advanced pads are built for controlled stopping performance and reduced noise, while the included hardware kit uses PTFE coating, vulcanized rubber, and stainless steel for OE-style form and function. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Can Address
- Rusty or worn rotors on a Ford Mustang Brembo brake package
- Brake noise from fatigued or corroded hardware
- Uneven pad wear caused by worn brake hardware
- Reduced braking consistency from aged pads and rotors
- Longer service time from rotors that require extra prep before installation
Installation Notes
Fits 2015-2017 Ford Mustang, front and rear, with Brembo Package (6-Piston Front Calipers). Fits 2018-2021 Ford Mustang, front and rear, with Performance Brakes (Brembo 6-Piston Front Calipers). Fits 2022 Ford Mustang, front and rear, with Performance Brakes (Brembo 6-Piston Front Calipers). Verify caliper package and brake configuration before ordering. Follow proper brake service procedures, clean all mating surfaces, and bed in the pads according to the manufacturer’s instructions.
Quality Assurance
DFC rotors are manufactured to OE specifications, inspected for balance and critical dimensions, and backed by a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable performance, and the hardware kit is engineered to match original equipment form, fit, and function.
Description
Brake Kit for Mustang Performance Brakes
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a front and rear disc brake kit built for select Ford Mustang performance brake applications. Part number 4514-54111 combines coated rotors, low metallic pads, and matching hardware for a complete brake service package.
Compatible With 2015-2022 Ford Mustang models equipped with Brembo performance brakes, this kit is aimed at drivers who want OE-style fitment, corrosion protection, and consistent braking response. The DFC GEOSPEC rotor finish helps resist rust, while the 5000 Advanced pads are formulated for stable friction and quieter operation.
Key Features
- Part number 4514-54111
- Front and rear disc brake kit for select Ford Mustang performance brake setups
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors ship ready to install
- G3000/G11H18 cast iron rotor construction
- Non-directional rotor finish for smoother pad bed-in
- DFC 5000 Advanced low metallic brake pads
- Post-cured and scorched pads for stable friction performance
- Premium rubber-steel-rubber shims for improved NVH control
- Hardware kit included for the listed applications
Product Details
DFC GEOSPEC rotors are machined to tight tolerances, finished for even pad contact, and inspected for balance and critical dimensions. The coating is designed to fight corrosion better than conventional paint or zinc finishes, and it is swept away naturally during braking. The 5000 Advanced pads are built for controlled stopping performance and reduced noise, while the included hardware kit uses PTFE coating, vulcanized rubber, and stainless steel for OE-style form and function. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Can Address
- Rusty or worn rotors on a Ford Mustang Brembo brake package
- Brake noise from fatigued or corroded hardware
- Uneven pad wear caused by worn brake hardware
- Reduced braking consistency from aged pads and rotors
- Longer service time from rotors that require extra prep before installation
Installation Notes
Fits 2015-2017 Ford Mustang, front and rear, with Brembo Package (6-Piston Front Calipers). Fits 2018-2021 Ford Mustang, front and rear, with Performance Brakes (Brembo 6-Piston Front Calipers). Fits 2022 Ford Mustang, front and rear, with Performance Brakes (Brembo 6-Piston Front Calipers). Verify caliper package and brake configuration before ordering. Follow proper brake service procedures, clean all mating surfaces, and bed in the pads according to the manufacturer’s instructions.
Quality Assurance
DFC rotors are manufactured to OE specifications, inspected for balance and critical dimensions, and backed by a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable performance, and the hardware kit is engineered to match original equipment form, fit, and function.
