Dynamite Friction 4514-54088 Disc Brake Kit - Front and Rear
Brake Kit for Ford Fusion and Lincoln MKZ
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for front and rear brake service on select Ford Fusion and Lincoln MKZ applications. Part number 4514-54088 combines coated rotors, ceramic pads, and matching hardware in one brake service kit for a complete repair.
Key Features
- DFC GEOSPEC coated brake rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Hardware kit engineered with PTFE coating, vulcanized rubber, and stainless steel
- OE-style rotor machining with non-directional finish for smoother pad bedding
- Part number 4514-54088 for front and rear brake service
Product Details
DFC’s GEOSPEC rotor line is designed for drivers who want OE-matched rotor construction with added corrosion protection. These rotors are processed dry and ready to install, which helps reduce prep time during a brake job. The cast iron specification, tight machining tolerances, balance inspection on vented rotors, and non-directional finish all support consistent braking feel and quieter operation. The 5000 Advanced ceramic pads are post cured and scorched for stable friction performance from the first stop, while the included hardware kit addresses worn or corroded brake hardware that can contribute to noise and uneven wear. This part number 4514-54088 is a direct service solution for 2013-2020 Ford Fusion and 2013-2016 Lincoln MKZ front and rear brake replacement.
What It Helps Fix
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weak brake hardware
- Reduced stopping performance from worn rotors and pads
- Brake pulsation related to rotor wear or finish issues
- Rust buildup on exposed rotor surfaces
Installation Notes
Compatible With 2013-2020 Ford Fusion, front and rear; 2014-2016 Ford Fusion, front and rear, excluding Plug-In Type; and 2013-2016 Lincoln MKZ, front and rear. Verify rotor size, brake package, and vehicle configuration before installation. Clean the rotor friction surfaces before assembly, follow proper bedding procedures for ceramic pads, and inspect caliper slides and mounting points during service. Part number 4514-54088 is commonly searched for Ford Fusion brake kit and Lincoln MKZ front and rear brake replacement applications.
Quality Assurance
DFC rotors are manufactured to OE specifications and undergo 100% inspection of critical dimensions. Vented rotors are balance-checked and corrected when needed, and the rotors carry a 12-month warranty against defects in material and workmanship. DFC brake pads are post cured, scorched, and assembled with premium shims to support stable friction performance and reduced noise.
Brake Kit for Ford Fusion and Lincoln MKZ
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for front and rear brake service on select Ford Fusion and Lincoln MKZ applications. Part number 4514-54088 combines coated rotors, ceramic pads, and matching hardware in one brake service kit for a complete repair.
Key Features
- DFC GEOSPEC coated brake rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Hardware kit engineered with PTFE coating, vulcanized rubber, and stainless steel
- OE-style rotor machining with non-directional finish for smoother pad bedding
- Part number 4514-54088 for front and rear brake service
Product Details
DFC’s GEOSPEC rotor line is designed for drivers who want OE-matched rotor construction with added corrosion protection. These rotors are processed dry and ready to install, which helps reduce prep time during a brake job. The cast iron specification, tight machining tolerances, balance inspection on vented rotors, and non-directional finish all support consistent braking feel and quieter operation. The 5000 Advanced ceramic pads are post cured and scorched for stable friction performance from the first stop, while the included hardware kit addresses worn or corroded brake hardware that can contribute to noise and uneven wear. This part number 4514-54088 is a direct service solution for 2013-2020 Ford Fusion and 2013-2016 Lincoln MKZ front and rear brake replacement.
What It Helps Fix
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weak brake hardware
- Reduced stopping performance from worn rotors and pads
- Brake pulsation related to rotor wear or finish issues
- Rust buildup on exposed rotor surfaces
Installation Notes
Compatible With 2013-2020 Ford Fusion, front and rear; 2014-2016 Ford Fusion, front and rear, excluding Plug-In Type; and 2013-2016 Lincoln MKZ, front and rear. Verify rotor size, brake package, and vehicle configuration before installation. Clean the rotor friction surfaces before assembly, follow proper bedding procedures for ceramic pads, and inspect caliper slides and mounting points during service. Part number 4514-54088 is commonly searched for Ford Fusion brake kit and Lincoln MKZ front and rear brake replacement applications.
Quality Assurance
DFC rotors are manufactured to OE specifications and undergo 100% inspection of critical dimensions. Vented rotors are balance-checked and corrected when needed, and the rotors carry a 12-month warranty against defects in material and workmanship. DFC brake pads are post cured, scorched, and assembled with premium shims to support stable friction performance and reduced noise.
Description
Brake Kit for Ford Fusion and Lincoln MKZ
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for front and rear brake service on select Ford Fusion and Lincoln MKZ applications. Part number 4514-54088 combines coated rotors, ceramic pads, and matching hardware in one brake service kit for a complete repair.
Key Features
- DFC GEOSPEC coated brake rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Hardware kit engineered with PTFE coating, vulcanized rubber, and stainless steel
- OE-style rotor machining with non-directional finish for smoother pad bedding
- Part number 4514-54088 for front and rear brake service
Product Details
DFC’s GEOSPEC rotor line is designed for drivers who want OE-matched rotor construction with added corrosion protection. These rotors are processed dry and ready to install, which helps reduce prep time during a brake job. The cast iron specification, tight machining tolerances, balance inspection on vented rotors, and non-directional finish all support consistent braking feel and quieter operation. The 5000 Advanced ceramic pads are post cured and scorched for stable friction performance from the first stop, while the included hardware kit addresses worn or corroded brake hardware that can contribute to noise and uneven wear. This part number 4514-54088 is a direct service solution for 2013-2020 Ford Fusion and 2013-2016 Lincoln MKZ front and rear brake replacement.
What It Helps Fix
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weak brake hardware
- Reduced stopping performance from worn rotors and pads
- Brake pulsation related to rotor wear or finish issues
- Rust buildup on exposed rotor surfaces
Installation Notes
Compatible With 2013-2020 Ford Fusion, front and rear; 2014-2016 Ford Fusion, front and rear, excluding Plug-In Type; and 2013-2016 Lincoln MKZ, front and rear. Verify rotor size, brake package, and vehicle configuration before installation. Clean the rotor friction surfaces before assembly, follow proper bedding procedures for ceramic pads, and inspect caliper slides and mounting points during service. Part number 4514-54088 is commonly searched for Ford Fusion brake kit and Lincoln MKZ front and rear brake replacement applications.
Quality Assurance
DFC rotors are manufactured to OE specifications and undergo 100% inspection of critical dimensions. Vented rotors are balance-checked and corrected when needed, and the rotors carry a 12-month warranty against defects in material and workmanship. DFC brake pads are post cured, scorched, and assembled with premium shims to support stable friction performance and reduced noise.
