Dynamite Friction 4514-54068 Disc Brake Kit - Front and Rear
Brake Kit Overview
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a complete disc brake kit built for OE-style service on the front or rear axle, depending on application. Part number 4514-54068 combines coated rotors, semi-metallic pads, and matching hardware in one package for a cleaner brake job on compatible vehicles.
Compatible With select make/model applications, this kit is suited for drivers looking for a direct brake service solution with rotor, pad, and hardware components matched for the same axle. The 4514-54068 kit is designed for vehicles such as Honda Civic and similar applications where OE-level fit and braking consistency matter.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors that are ready to install without oil removal
- G3000/G11H18 cast iron rotor construction for OE-style durability
- Non-directional rotor finish for more even pad bed-in and smoother stops
- DFC 5000 Advanced semi-metallic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims for improved NVH control
- Hardware kit with PTFE coating, vulcanized rubber, and stainless steel elements
Product Line Details
DFC GEOSPEC rotors are engineered for corrosion resistance and OE-spec machining tolerances, while the 5000 Advanced pad line focuses on stable friction performance and reduced noise, vibration, and harshness. Together, they create a service kit intended to restore braking feel with matched components from the same brand family. Part number 4514-54068 is a practical choice for brake service on applications such as Honda Civic when a complete axle refresh is needed.
Common Brake Issues This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Noise caused by fatigued or corroded hardware
- Reduced stopping performance from worn pads
- Uneven pad wear from caliper movement or weak hardware tension
- Longer installation time caused by uncoated rotors that require cleaning
Installation Notes
Inspect calipers, slides, and mounting surfaces before installation. Clean the hub face thoroughly and verify rotor runout and pad contact surfaces during assembly. The coated rotors are shipped dry and do not require oil removal before installation. Follow the vehicle manufacturer’s brake service procedure and bed-in instructions for the pads after installation.
Quality Assurance
Each DFC GEOSPEC rotor is machined to tight tolerances, inspected for critical dimensions, and checked for balance on vented designs. The rotors carry a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and scorched for stable friction performance, and the hardware kit is built to OE-style form, fit, and function.
Brake Kit Overview
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a complete disc brake kit built for OE-style service on the front or rear axle, depending on application. Part number 4514-54068 combines coated rotors, semi-metallic pads, and matching hardware in one package for a cleaner brake job on compatible vehicles.
Compatible With select make/model applications, this kit is suited for drivers looking for a direct brake service solution with rotor, pad, and hardware components matched for the same axle. The 4514-54068 kit is designed for vehicles such as Honda Civic and similar applications where OE-level fit and braking consistency matter.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors that are ready to install without oil removal
- G3000/G11H18 cast iron rotor construction for OE-style durability
- Non-directional rotor finish for more even pad bed-in and smoother stops
- DFC 5000 Advanced semi-metallic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims for improved NVH control
- Hardware kit with PTFE coating, vulcanized rubber, and stainless steel elements
Product Line Details
DFC GEOSPEC rotors are engineered for corrosion resistance and OE-spec machining tolerances, while the 5000 Advanced pad line focuses on stable friction performance and reduced noise, vibration, and harshness. Together, they create a service kit intended to restore braking feel with matched components from the same brand family. Part number 4514-54068 is a practical choice for brake service on applications such as Honda Civic when a complete axle refresh is needed.
Common Brake Issues This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Noise caused by fatigued or corroded hardware
- Reduced stopping performance from worn pads
- Uneven pad wear from caliper movement or weak hardware tension
- Longer installation time caused by uncoated rotors that require cleaning
Installation Notes
Inspect calipers, slides, and mounting surfaces before installation. Clean the hub face thoroughly and verify rotor runout and pad contact surfaces during assembly. The coated rotors are shipped dry and do not require oil removal before installation. Follow the vehicle manufacturer’s brake service procedure and bed-in instructions for the pads after installation.
Quality Assurance
Each DFC GEOSPEC rotor is machined to tight tolerances, inspected for critical dimensions, and checked for balance on vented designs. The rotors carry a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and scorched for stable friction performance, and the hardware kit is built to OE-style form, fit, and function.
Original: $903.02
-65%$903.02
$316.06Description
Brake Kit Overview
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a complete disc brake kit built for OE-style service on the front or rear axle, depending on application. Part number 4514-54068 combines coated rotors, semi-metallic pads, and matching hardware in one package for a cleaner brake job on compatible vehicles.
Compatible With select make/model applications, this kit is suited for drivers looking for a direct brake service solution with rotor, pad, and hardware components matched for the same axle. The 4514-54068 kit is designed for vehicles such as Honda Civic and similar applications where OE-level fit and braking consistency matter.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors that are ready to install without oil removal
- G3000/G11H18 cast iron rotor construction for OE-style durability
- Non-directional rotor finish for more even pad bed-in and smoother stops
- DFC 5000 Advanced semi-metallic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims for improved NVH control
- Hardware kit with PTFE coating, vulcanized rubber, and stainless steel elements
Product Line Details
DFC GEOSPEC rotors are engineered for corrosion resistance and OE-spec machining tolerances, while the 5000 Advanced pad line focuses on stable friction performance and reduced noise, vibration, and harshness. Together, they create a service kit intended to restore braking feel with matched components from the same brand family. Part number 4514-54068 is a practical choice for brake service on applications such as Honda Civic when a complete axle refresh is needed.
Common Brake Issues This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Noise caused by fatigued or corroded hardware
- Reduced stopping performance from worn pads
- Uneven pad wear from caliper movement or weak hardware tension
- Longer installation time caused by uncoated rotors that require cleaning
Installation Notes
Inspect calipers, slides, and mounting surfaces before installation. Clean the hub face thoroughly and verify rotor runout and pad contact surfaces during assembly. The coated rotors are shipped dry and do not require oil removal before installation. Follow the vehicle manufacturer’s brake service procedure and bed-in instructions for the pads after installation.
Quality Assurance
Each DFC GEOSPEC rotor is machined to tight tolerances, inspected for critical dimensions, and checked for balance on vented designs. The rotors carry a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and scorched for stable friction performance, and the hardware kit is built to OE-style form, fit, and function.
