Dynamite Friction 4514-54038 Disc Brake Kit - Front and Rear
Brake Kit for Ford F-150 and Lincoln Mark LT
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a front and rear disc brake kit built for select Ford and Lincoln trucks. Part number 4514-54038 combines coated rotors, semi-metallic pads, and matched brake hardware for a complete brake service on supported applications.
Key Features
- Complete disc brake kit with rotors, pads, and hardware for front and rear service
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-to-install rotor coating helps reduce prep time during brake replacement
- G3000/G11H18 cast iron rotor construction engineered to OE specifications
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 5000 Advanced semi-metallic pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel components
Product Details
DFC’s 5000 Advanced Brake Pads line is formulated for modern braking systems that require consistent friction characteristics across each axle. The pads are post-cured for stable performance and scorched to remove uncured bonding agents, which helps reduce initial break-in time. On supported vehicles such as the Ford F-150 and Lincoln Mark LT, this setup is aimed at restoring predictable pedal feel and controlled stopping performance.
The GEOSPEC coated rotors are machined to tight tolerances, inspected for critical dimensions, and finished with a non-directional surface to promote even contact with the pads. The coating is designed to resist rust better than conventional paint or zinc finishes, while remaining safe for the friction surface during normal use. Part number 4514-54038 is a practical choice for drivers servicing a 2004-2008 Ford F-150 or 2006-2008 Lincoln Mark LT with the listed brake configuration.
What This Brake Kit Helps Address
- Brake pulsation from worn or uneven rotors
- Noise caused by fatigued or corroded hardware
- Reduced stopping performance from worn pads
- Uneven pad wear from aged caliper hardware
- Rust buildup on exposed rotor surfaces
Installation Notes
Compatible With 2005-2008 Ford F-150, front and rear, 6 lug wheels. Compatible With 2006-2008 Lincoln Mark LT, front and rear, 6 lug wheels, base payload package. Compatible With 2004 Ford F-150, front and rear, 6 lug wheels. Compatible With 2004 Ford F-150 Heritage, front and rear, 6 lug wheels. Verify bearing retainer nut requirements before installation: 340-54503 for 2005-2008 applications and 345-54003 for 2004 applications. Clean all mating surfaces, inspect calipers and slides, and follow proper pad bedding procedures after installation.
Quality Assurance
DFC GEOSPEC rotors are 100% inspected for critical attributes and are backed by a 12-month warranty against defects in material and workmanship. The brake pads are assembled with premium shims, and the hardware kit is built to OE-style form, fit, and function for dependable service.
Brake Kit for Ford F-150 and Lincoln Mark LT
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a front and rear disc brake kit built for select Ford and Lincoln trucks. Part number 4514-54038 combines coated rotors, semi-metallic pads, and matched brake hardware for a complete brake service on supported applications.
Key Features
- Complete disc brake kit with rotors, pads, and hardware for front and rear service
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-to-install rotor coating helps reduce prep time during brake replacement
- G3000/G11H18 cast iron rotor construction engineered to OE specifications
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 5000 Advanced semi-metallic pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel components
Product Details
DFC’s 5000 Advanced Brake Pads line is formulated for modern braking systems that require consistent friction characteristics across each axle. The pads are post-cured for stable performance and scorched to remove uncured bonding agents, which helps reduce initial break-in time. On supported vehicles such as the Ford F-150 and Lincoln Mark LT, this setup is aimed at restoring predictable pedal feel and controlled stopping performance.
The GEOSPEC coated rotors are machined to tight tolerances, inspected for critical dimensions, and finished with a non-directional surface to promote even contact with the pads. The coating is designed to resist rust better than conventional paint or zinc finishes, while remaining safe for the friction surface during normal use. Part number 4514-54038 is a practical choice for drivers servicing a 2004-2008 Ford F-150 or 2006-2008 Lincoln Mark LT with the listed brake configuration.
What This Brake Kit Helps Address
- Brake pulsation from worn or uneven rotors
- Noise caused by fatigued or corroded hardware
- Reduced stopping performance from worn pads
- Uneven pad wear from aged caliper hardware
- Rust buildup on exposed rotor surfaces
Installation Notes
Compatible With 2005-2008 Ford F-150, front and rear, 6 lug wheels. Compatible With 2006-2008 Lincoln Mark LT, front and rear, 6 lug wheels, base payload package. Compatible With 2004 Ford F-150, front and rear, 6 lug wheels. Compatible With 2004 Ford F-150 Heritage, front and rear, 6 lug wheels. Verify bearing retainer nut requirements before installation: 340-54503 for 2005-2008 applications and 345-54003 for 2004 applications. Clean all mating surfaces, inspect calipers and slides, and follow proper pad bedding procedures after installation.
Quality Assurance
DFC GEOSPEC rotors are 100% inspected for critical attributes and are backed by a 12-month warranty against defects in material and workmanship. The brake pads are assembled with premium shims, and the hardware kit is built to OE-style form, fit, and function for dependable service.
Original: $650.41
-65%$650.41
$227.64Description
Brake Kit for Ford F-150 and Lincoln Mark LT
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a front and rear disc brake kit built for select Ford and Lincoln trucks. Part number 4514-54038 combines coated rotors, semi-metallic pads, and matched brake hardware for a complete brake service on supported applications.
Key Features
- Complete disc brake kit with rotors, pads, and hardware for front and rear service
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-to-install rotor coating helps reduce prep time during brake replacement
- G3000/G11H18 cast iron rotor construction engineered to OE specifications
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 5000 Advanced semi-metallic pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel components
Product Details
DFC’s 5000 Advanced Brake Pads line is formulated for modern braking systems that require consistent friction characteristics across each axle. The pads are post-cured for stable performance and scorched to remove uncured bonding agents, which helps reduce initial break-in time. On supported vehicles such as the Ford F-150 and Lincoln Mark LT, this setup is aimed at restoring predictable pedal feel and controlled stopping performance.
The GEOSPEC coated rotors are machined to tight tolerances, inspected for critical dimensions, and finished with a non-directional surface to promote even contact with the pads. The coating is designed to resist rust better than conventional paint or zinc finishes, while remaining safe for the friction surface during normal use. Part number 4514-54038 is a practical choice for drivers servicing a 2004-2008 Ford F-150 or 2006-2008 Lincoln Mark LT with the listed brake configuration.
What This Brake Kit Helps Address
- Brake pulsation from worn or uneven rotors
- Noise caused by fatigued or corroded hardware
- Reduced stopping performance from worn pads
- Uneven pad wear from aged caliper hardware
- Rust buildup on exposed rotor surfaces
Installation Notes
Compatible With 2005-2008 Ford F-150, front and rear, 6 lug wheels. Compatible With 2006-2008 Lincoln Mark LT, front and rear, 6 lug wheels, base payload package. Compatible With 2004 Ford F-150, front and rear, 6 lug wheels. Compatible With 2004 Ford F-150 Heritage, front and rear, 6 lug wheels. Verify bearing retainer nut requirements before installation: 340-54503 for 2005-2008 applications and 345-54003 for 2004 applications. Clean all mating surfaces, inspect calipers and slides, and follow proper pad bedding procedures after installation.
Quality Assurance
DFC GEOSPEC rotors are 100% inspected for critical attributes and are backed by a 12-month warranty against defects in material and workmanship. The brake pads are assembled with premium shims, and the hardware kit is built to OE-style form, fit, and function for dependable service.
