Dynamite Friction 4514-54015 Disc Brake Kit - Front and Rear
Brake Kit for Ford E-350 Super Duty
This DFC brake service kit combines GEOSPEC coated rotors, 5000 Advanced semi-metallic pads, and matching hardware for a complete front and rear brake refresh. It is built for 1999-2004 Ford E-350 Super Duty single rear wheel applications, including the rear axle tag configurations listed below.
Key Features
- Fits 1999-2004 Ford E-350 Super Duty, front and rear
- DFC GEOSPEC coated rotors with corrosion-resistant silver-gray finish
- 5000 Advanced semi-metallic brake pads with post-cured friction material
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Hardware kit with PTFE coating, vulcanized rubber, and stainless steel construction
- Dry-processed rotors ship ready to install
- Non-directional rotor finish supports even pad bed-in and smoother stops
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Semi Metallic and Hardware Kit, part number 4514-54015, is engineered as a complete brake service solution for Ford E-350 Super Duty front and rear brake replacement. The coated rotors are machined to OE-style tolerances, processed dry, and finished to resist rust better than conventional paint or zinc coatings. The 5000 Advanced pads are post-cured and scorched to reduce initial break-in time, while the included shims help control brake noise and vibration. This part number 4514-54015 is a practical choice for owners looking to restore braking performance on the Ford E-350 Super Duty without piecing together separate components.
This part cross-references common brake service kit applications for the same vehicle platform.
Used For
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Reduced stopping performance from worn rotors and friction material
- Rust buildup on exposed rotor surfaces
- Excess caliper movement during brake operation
Installation Notes
Compatible With 1999-2004 Ford E-350 Super Duty, front and rear. Two fitment notes are listed: single rear wheel with rear axle tag XC25-AEE, AFE, or AFC, and single rear wheel excluding rear axle tag XC25-AEE, AFE, or AFC. Verify axle tag details before ordering. The rotors are shipped dry and ready for installation, which helps reduce prep time during a standard brake job.
Quality Assurance
DFC machines the rotors to tight tolerances, inspects critical dimensions, and checks vented rotors for balance. The rotors are covered by a 12-month warranty against defects in material and workmanship. Part number 4514-54015 is built to OE-style form, fit, and function standards for the Ford E-350 Super Duty brake service application.
Brake Kit for Ford E-350 Super Duty
This DFC brake service kit combines GEOSPEC coated rotors, 5000 Advanced semi-metallic pads, and matching hardware for a complete front and rear brake refresh. It is built for 1999-2004 Ford E-350 Super Duty single rear wheel applications, including the rear axle tag configurations listed below.
Key Features
- Fits 1999-2004 Ford E-350 Super Duty, front and rear
- DFC GEOSPEC coated rotors with corrosion-resistant silver-gray finish
- 5000 Advanced semi-metallic brake pads with post-cured friction material
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Hardware kit with PTFE coating, vulcanized rubber, and stainless steel construction
- Dry-processed rotors ship ready to install
- Non-directional rotor finish supports even pad bed-in and smoother stops
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Semi Metallic and Hardware Kit, part number 4514-54015, is engineered as a complete brake service solution for Ford E-350 Super Duty front and rear brake replacement. The coated rotors are machined to OE-style tolerances, processed dry, and finished to resist rust better than conventional paint or zinc coatings. The 5000 Advanced pads are post-cured and scorched to reduce initial break-in time, while the included shims help control brake noise and vibration. This part number 4514-54015 is a practical choice for owners looking to restore braking performance on the Ford E-350 Super Duty without piecing together separate components.
This part cross-references common brake service kit applications for the same vehicle platform.
Used For
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Reduced stopping performance from worn rotors and friction material
- Rust buildup on exposed rotor surfaces
- Excess caliper movement during brake operation
Installation Notes
Compatible With 1999-2004 Ford E-350 Super Duty, front and rear. Two fitment notes are listed: single rear wheel with rear axle tag XC25-AEE, AFE, or AFC, and single rear wheel excluding rear axle tag XC25-AEE, AFE, or AFC. Verify axle tag details before ordering. The rotors are shipped dry and ready for installation, which helps reduce prep time during a standard brake job.
Quality Assurance
DFC machines the rotors to tight tolerances, inspects critical dimensions, and checks vented rotors for balance. The rotors are covered by a 12-month warranty against defects in material and workmanship. Part number 4514-54015 is built to OE-style form, fit, and function standards for the Ford E-350 Super Duty brake service application.
Original: $663.06
-65%$663.06
$232.07Description
Brake Kit for Ford E-350 Super Duty
This DFC brake service kit combines GEOSPEC coated rotors, 5000 Advanced semi-metallic pads, and matching hardware for a complete front and rear brake refresh. It is built for 1999-2004 Ford E-350 Super Duty single rear wheel applications, including the rear axle tag configurations listed below.
Key Features
- Fits 1999-2004 Ford E-350 Super Duty, front and rear
- DFC GEOSPEC coated rotors with corrosion-resistant silver-gray finish
- 5000 Advanced semi-metallic brake pads with post-cured friction material
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Hardware kit with PTFE coating, vulcanized rubber, and stainless steel construction
- Dry-processed rotors ship ready to install
- Non-directional rotor finish supports even pad bed-in and smoother stops
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Semi Metallic and Hardware Kit, part number 4514-54015, is engineered as a complete brake service solution for Ford E-350 Super Duty front and rear brake replacement. The coated rotors are machined to OE-style tolerances, processed dry, and finished to resist rust better than conventional paint or zinc coatings. The 5000 Advanced pads are post-cured and scorched to reduce initial break-in time, while the included shims help control brake noise and vibration. This part number 4514-54015 is a practical choice for owners looking to restore braking performance on the Ford E-350 Super Duty without piecing together separate components.
This part cross-references common brake service kit applications for the same vehicle platform.
Used For
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Reduced stopping performance from worn rotors and friction material
- Rust buildup on exposed rotor surfaces
- Excess caliper movement during brake operation
Installation Notes
Compatible With 1999-2004 Ford E-350 Super Duty, front and rear. Two fitment notes are listed: single rear wheel with rear axle tag XC25-AEE, AFE, or AFC, and single rear wheel excluding rear axle tag XC25-AEE, AFE, or AFC. Verify axle tag details before ordering. The rotors are shipped dry and ready for installation, which helps reduce prep time during a standard brake job.
Quality Assurance
DFC machines the rotors to tight tolerances, inspects critical dimensions, and checks vented rotors for balance. The rotors are covered by a 12-month warranty against defects in material and workmanship. Part number 4514-54015 is built to OE-style form, fit, and function standards for the Ford E-350 Super Duty brake service application.
