Dynamite Friction 4514-47157 Disc Brake Pad and Rotor / Drum Brake Shoe and Drum Kit - Front and Rear
Brake Kit for GM G-Series Vans
The DFC Geospec Rotors with 5000 Advanced Brake Pads kit, part number 4514-47157, is built for front and rear brake service on select Chevrolet and GMC vans and Suburban applications. It combines coated rotors, advanced friction pads, and matching drum brake components for a complete brake refresh on the same vehicle platform.
Compatible With 1990-1995 Chevrolet G10, Chevrolet G20, GMC G1500, GMC G2500, and 1990-1991 Chevrolet R1500 Suburban and GMC R1500 Suburban applications, including listed vacuum booster and 2-wheel ABS configurations.
Key Features
- DFC 5000 Advanced Brake Pads with post-cured friction material for stable braking performance
- Scorched pad surface to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- Dry-processed rotors arrive ready to install without oil removal or extra prep
- G3000/G11H18 cast iron rotor construction machined to OE-style tolerances
- Non-directional rotor finish for more even pad bed-in and quieter stops
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel construction
Product Details
DFC designed the 4514-47157 brake service kit for drivers who need a coordinated brake repair across the front and rear of the vehicle. The rotor and pad package is paired with drum brake shoes and hardware for the rear service side, helping restore consistent pedal feel, braking balance, and wear control on Chevrolet G10, Chevrolet G20, GMC G1500, GMC G2500, and R1500 Suburban models. The GeoSpec rotor coating helps protect against corrosion during service and after installation, while the machined finish supports smooth contact with the pad surface.
This part number, 4514-47157, is a practical choice for full brake maintenance on 1990-1995 GM van platforms where front and rear components are serviced together. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues Addressed
- Brake noise from worn pads, hardware, or uneven rotor surfaces
- Rust buildup on exposed rotor surfaces
- Longer stopping distances caused by worn friction material
- Pulsation or uneven braking from rotor wear or finish issues
- Reduced rear brake performance from fatigued shoes or hardware
Installation Notes
Verify axle, booster, and ABS configuration before ordering, especially on 1993-1995 Chevrolet G10 and G20 models with vacuum booster and 1993-1995 GMC G1500 and G2500 models with 2-wheel ABS. The rotors are shipped dry and ready for installation, so no oil cleaning step is required. Follow standard brake service procedures, inspect calipers and drums during disassembly, and confirm proper pad and shoe bedding after installation.
Quality Assurance
DFC states that the brake pads are post-cured and scorched for consistent friction behavior, and the rotors are machined, balanced where required, and inspected for critical dimensions against OE specifications. The rotors include a 12-month warranty against defects in material and workmanship.
Brake Kit for GM G-Series Vans
The DFC Geospec Rotors with 5000 Advanced Brake Pads kit, part number 4514-47157, is built for front and rear brake service on select Chevrolet and GMC vans and Suburban applications. It combines coated rotors, advanced friction pads, and matching drum brake components for a complete brake refresh on the same vehicle platform.
Compatible With 1990-1995 Chevrolet G10, Chevrolet G20, GMC G1500, GMC G2500, and 1990-1991 Chevrolet R1500 Suburban and GMC R1500 Suburban applications, including listed vacuum booster and 2-wheel ABS configurations.
Key Features
- DFC 5000 Advanced Brake Pads with post-cured friction material for stable braking performance
- Scorched pad surface to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- Dry-processed rotors arrive ready to install without oil removal or extra prep
- G3000/G11H18 cast iron rotor construction machined to OE-style tolerances
- Non-directional rotor finish for more even pad bed-in and quieter stops
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel construction
Product Details
DFC designed the 4514-47157 brake service kit for drivers who need a coordinated brake repair across the front and rear of the vehicle. The rotor and pad package is paired with drum brake shoes and hardware for the rear service side, helping restore consistent pedal feel, braking balance, and wear control on Chevrolet G10, Chevrolet G20, GMC G1500, GMC G2500, and R1500 Suburban models. The GeoSpec rotor coating helps protect against corrosion during service and after installation, while the machined finish supports smooth contact with the pad surface.
This part number, 4514-47157, is a practical choice for full brake maintenance on 1990-1995 GM van platforms where front and rear components are serviced together. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues Addressed
- Brake noise from worn pads, hardware, or uneven rotor surfaces
- Rust buildup on exposed rotor surfaces
- Longer stopping distances caused by worn friction material
- Pulsation or uneven braking from rotor wear or finish issues
- Reduced rear brake performance from fatigued shoes or hardware
Installation Notes
Verify axle, booster, and ABS configuration before ordering, especially on 1993-1995 Chevrolet G10 and G20 models with vacuum booster and 1993-1995 GMC G1500 and G2500 models with 2-wheel ABS. The rotors are shipped dry and ready for installation, so no oil cleaning step is required. Follow standard brake service procedures, inspect calipers and drums during disassembly, and confirm proper pad and shoe bedding after installation.
Quality Assurance
DFC states that the brake pads are post-cured and scorched for consistent friction behavior, and the rotors are machined, balanced where required, and inspected for critical dimensions against OE specifications. The rotors include a 12-month warranty against defects in material and workmanship.
Original: $703.22
-65%$703.22
$246.13Description
Brake Kit for GM G-Series Vans
The DFC Geospec Rotors with 5000 Advanced Brake Pads kit, part number 4514-47157, is built for front and rear brake service on select Chevrolet and GMC vans and Suburban applications. It combines coated rotors, advanced friction pads, and matching drum brake components for a complete brake refresh on the same vehicle platform.
Compatible With 1990-1995 Chevrolet G10, Chevrolet G20, GMC G1500, GMC G2500, and 1990-1991 Chevrolet R1500 Suburban and GMC R1500 Suburban applications, including listed vacuum booster and 2-wheel ABS configurations.
Key Features
- DFC 5000 Advanced Brake Pads with post-cured friction material for stable braking performance
- Scorched pad surface to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- Dry-processed rotors arrive ready to install without oil removal or extra prep
- G3000/G11H18 cast iron rotor construction machined to OE-style tolerances
- Non-directional rotor finish for more even pad bed-in and quieter stops
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel construction
Product Details
DFC designed the 4514-47157 brake service kit for drivers who need a coordinated brake repair across the front and rear of the vehicle. The rotor and pad package is paired with drum brake shoes and hardware for the rear service side, helping restore consistent pedal feel, braking balance, and wear control on Chevrolet G10, Chevrolet G20, GMC G1500, GMC G2500, and R1500 Suburban models. The GeoSpec rotor coating helps protect against corrosion during service and after installation, while the machined finish supports smooth contact with the pad surface.
This part number, 4514-47157, is a practical choice for full brake maintenance on 1990-1995 GM van platforms where front and rear components are serviced together. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues Addressed
- Brake noise from worn pads, hardware, or uneven rotor surfaces
- Rust buildup on exposed rotor surfaces
- Longer stopping distances caused by worn friction material
- Pulsation or uneven braking from rotor wear or finish issues
- Reduced rear brake performance from fatigued shoes or hardware
Installation Notes
Verify axle, booster, and ABS configuration before ordering, especially on 1993-1995 Chevrolet G10 and G20 models with vacuum booster and 1993-1995 GMC G1500 and G2500 models with 2-wheel ABS. The rotors are shipped dry and ready for installation, so no oil cleaning step is required. Follow standard brake service procedures, inspect calipers and drums during disassembly, and confirm proper pad and shoe bedding after installation.
Quality Assurance
DFC states that the brake pads are post-cured and scorched for consistent friction behavior, and the rotors are machined, balanced where required, and inspected for critical dimensions against OE specifications. The rotors include a 12-month warranty against defects in material and workmanship.
