Dynamite Friction 4514-47131 Disc Brake Pad and Rotor / Drum Brake Shoe and Drum Kit - Front and Rear
Brake Kit for Chevrolet and GMC Trucks
Dynamite Friction DFC Geospec Rotors with 5000 Advanced Brake Pads includes DFC Drums Shoes and Hardware, part number 4514-47131, is a front and rear brake service kit built for select Chevrolet K1500, Tahoe, and GMC K1500 applications. It combines coated rotors, advanced brake pads, drum brake components, and hardware for a complete brake refresh on vehicles with mixed disc/drum setups.
Key Features
- Part number 4514-47131 for select front and rear brake service applications
- DFC 5000 Advanced Brake Pads with post-cured friction material for stable performance
- Scorched pad surface to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- Dry-processed, dry-shipped rotors ready for installation without additional cleaning
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Drum brake shoes and hardware included for a more complete rear brake service
Product Details
The DFC Geospec Rotors with 5000 Advanced Brake Pads line is engineered for OE-style fit, durability, and consistent braking behavior. The rotor castings use G3000/G11H18 cast iron specifications and are machined to tight tolerances, then inspected for critical dimensions and balance. The brake pads are formulated for stable friction output, while the coated rotors help reduce corrosion and simplify installation on daily-driven trucks and SUVs.
Compatible With 1992-1999 Chevrolet K1500, front and rear; 1998-1999 Chevrolet Tahoe, front and rear; and 1988-1999 GMC K1500, front and rear. This part number 4514-47131 is a practical choice for Chevrolet K1500 and GMC K1500 brake service, as well as 1998-1999 Chevrolet Tahoe front and rear brake replacement work.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads, fatigued hardware, or uneven rotor surfaces
- Rust buildup on rotor faces and exposed braking surfaces
- Longer stopping distances caused by worn friction material
- Pulsation or uneven braking from rotor wear or finish issues
- Rear drum service needs from worn shoes or corroded drum hardware
Installation Notes
Inspect calipers, wheel bearings, brake hoses, and drum brake components before installation. Clean the hub mounting surface, verify rotor runout, and follow proper bedding procedures after installation. For drum brake service, confirm correct shoe adjustment and hardware placement before road testing. Use the vehicle-specific notes for rear axle configuration on Chevrolet K1500 and GMC K1500 applications.
Quality Assurance
DFC rotors undergo 100% inspection of critical attributes, and vented rotors are electronically mill-balanced when required. The brake pads are post-cured and scorched for consistent friction behavior, and the hardware kit uses PTFE coating, vulcanized rubber, and stainless steel for corrosion resistance and OE-style fit. Rotors include a 12-month warranty against defects in material and workmanship.
Brake Kit for Chevrolet and GMC Trucks
Dynamite Friction DFC Geospec Rotors with 5000 Advanced Brake Pads includes DFC Drums Shoes and Hardware, part number 4514-47131, is a front and rear brake service kit built for select Chevrolet K1500, Tahoe, and GMC K1500 applications. It combines coated rotors, advanced brake pads, drum brake components, and hardware for a complete brake refresh on vehicles with mixed disc/drum setups.
Key Features
- Part number 4514-47131 for select front and rear brake service applications
- DFC 5000 Advanced Brake Pads with post-cured friction material for stable performance
- Scorched pad surface to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- Dry-processed, dry-shipped rotors ready for installation without additional cleaning
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Drum brake shoes and hardware included for a more complete rear brake service
Product Details
The DFC Geospec Rotors with 5000 Advanced Brake Pads line is engineered for OE-style fit, durability, and consistent braking behavior. The rotor castings use G3000/G11H18 cast iron specifications and are machined to tight tolerances, then inspected for critical dimensions and balance. The brake pads are formulated for stable friction output, while the coated rotors help reduce corrosion and simplify installation on daily-driven trucks and SUVs.
Compatible With 1992-1999 Chevrolet K1500, front and rear; 1998-1999 Chevrolet Tahoe, front and rear; and 1988-1999 GMC K1500, front and rear. This part number 4514-47131 is a practical choice for Chevrolet K1500 and GMC K1500 brake service, as well as 1998-1999 Chevrolet Tahoe front and rear brake replacement work.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads, fatigued hardware, or uneven rotor surfaces
- Rust buildup on rotor faces and exposed braking surfaces
- Longer stopping distances caused by worn friction material
- Pulsation or uneven braking from rotor wear or finish issues
- Rear drum service needs from worn shoes or corroded drum hardware
Installation Notes
Inspect calipers, wheel bearings, brake hoses, and drum brake components before installation. Clean the hub mounting surface, verify rotor runout, and follow proper bedding procedures after installation. For drum brake service, confirm correct shoe adjustment and hardware placement before road testing. Use the vehicle-specific notes for rear axle configuration on Chevrolet K1500 and GMC K1500 applications.
Quality Assurance
DFC rotors undergo 100% inspection of critical attributes, and vented rotors are electronically mill-balanced when required. The brake pads are post-cured and scorched for consistent friction behavior, and the hardware kit uses PTFE coating, vulcanized rubber, and stainless steel for corrosion resistance and OE-style fit. Rotors include a 12-month warranty against defects in material and workmanship.
Description
Brake Kit for Chevrolet and GMC Trucks
Dynamite Friction DFC Geospec Rotors with 5000 Advanced Brake Pads includes DFC Drums Shoes and Hardware, part number 4514-47131, is a front and rear brake service kit built for select Chevrolet K1500, Tahoe, and GMC K1500 applications. It combines coated rotors, advanced brake pads, drum brake components, and hardware for a complete brake refresh on vehicles with mixed disc/drum setups.
Key Features
- Part number 4514-47131 for select front and rear brake service applications
- DFC 5000 Advanced Brake Pads with post-cured friction material for stable performance
- Scorched pad surface to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- Dry-processed, dry-shipped rotors ready for installation without additional cleaning
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Drum brake shoes and hardware included for a more complete rear brake service
Product Details
The DFC Geospec Rotors with 5000 Advanced Brake Pads line is engineered for OE-style fit, durability, and consistent braking behavior. The rotor castings use G3000/G11H18 cast iron specifications and are machined to tight tolerances, then inspected for critical dimensions and balance. The brake pads are formulated for stable friction output, while the coated rotors help reduce corrosion and simplify installation on daily-driven trucks and SUVs.
Compatible With 1992-1999 Chevrolet K1500, front and rear; 1998-1999 Chevrolet Tahoe, front and rear; and 1988-1999 GMC K1500, front and rear. This part number 4514-47131 is a practical choice for Chevrolet K1500 and GMC K1500 brake service, as well as 1998-1999 Chevrolet Tahoe front and rear brake replacement work.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads, fatigued hardware, or uneven rotor surfaces
- Rust buildup on rotor faces and exposed braking surfaces
- Longer stopping distances caused by worn friction material
- Pulsation or uneven braking from rotor wear or finish issues
- Rear drum service needs from worn shoes or corroded drum hardware
Installation Notes
Inspect calipers, wheel bearings, brake hoses, and drum brake components before installation. Clean the hub mounting surface, verify rotor runout, and follow proper bedding procedures after installation. For drum brake service, confirm correct shoe adjustment and hardware placement before road testing. Use the vehicle-specific notes for rear axle configuration on Chevrolet K1500 and GMC K1500 applications.
Quality Assurance
DFC rotors undergo 100% inspection of critical attributes, and vented rotors are electronically mill-balanced when required. The brake pads are post-cured and scorched for consistent friction behavior, and the hardware kit uses PTFE coating, vulcanized rubber, and stainless steel for corrosion resistance and OE-style fit. Rotors include a 12-month warranty against defects in material and workmanship.
