Dynamite Friction 4514-47089 Disc Brake Pad and Rotor / Drum Brake Shoe and Drum Kit - Front and Rear
Brake Kit for Chevrolet K20 and K20 Suburban
The DFC Geospec Rotors with 5000 Advanced Brake Pads kit is built for 1976-1977 Chevrolet K20 and 1977 Chevrolet K20 Suburban front and rear brake service. Part number 4514-47089 combines coated rotors, advanced friction pads, drums, shoes, and hardware components in one service package for a complete brake refresh.
Key Features
- Fits 1976-1977 Chevrolet K20, front and rear
- Fits 1977 Chevrolet K20 Suburban, front and rear
- DFC 5000 Advanced Brake Pads are post-cured for stable friction performance
- Pads are scorched to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- GeoSpec coated rotors feature a silver-gray finish that resists rust better than conventional paint or zinc coatings
- Rotors are dry processed and ready to install
- Non-directional rotor finish supports even pad bed-in and quieter braking
- Rotor castings are machined to OE-level tolerances and inspected for balance and critical dimensions
- Hardware kits use PTFE coating, vulcanized rubber, and stainless steel for corrosion protection
Product Details
Part number 4514-47089 is a DFC brake service kit for Chevrolet K20 and Chevrolet K20 Suburban applications listed above. The DFC Geospec rotor design uses G3000/G11H18 cast iron and a protective coating that helps reduce surface rust during storage and service. The 5000 Advanced pads are formulated for consistent friction, while the included brake hardware is engineered to restore proper spring tension and caliper movement where applicable. This makes 4514-47089 a practical choice for a full front and rear brake service on these classic Chevrolet trucks.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Rust buildup on rotor surfaces
- Uneven braking feel from worn friction materials
- Reduced stopping performance from aged brake components
- Corrosion-related service issues during brake replacement
Installation Notes
Verify axle position and vehicle configuration before ordering. For 1976-1977 Chevrolet K20 and 1977 Chevrolet K20 Suburban, this kit is listed for front and rear service. The rotors are shipped dry and ready to install, which helps reduce prep time during brake work. Inspect calipers, wheel cylinders, and related hydraulic components during service to confirm the rest of the brake system is in good condition.
Quality Assurance
DFC states that each rotor is machined to tight tolerances, inspected for critical dimensions, and checked for balance on vented designs. The rotors include a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched, and the hardware is built with corrosion-resistant materials to support consistent service results.
Brake Kit for Chevrolet K20 and K20 Suburban
The DFC Geospec Rotors with 5000 Advanced Brake Pads kit is built for 1976-1977 Chevrolet K20 and 1977 Chevrolet K20 Suburban front and rear brake service. Part number 4514-47089 combines coated rotors, advanced friction pads, drums, shoes, and hardware components in one service package for a complete brake refresh.
Key Features
- Fits 1976-1977 Chevrolet K20, front and rear
- Fits 1977 Chevrolet K20 Suburban, front and rear
- DFC 5000 Advanced Brake Pads are post-cured for stable friction performance
- Pads are scorched to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- GeoSpec coated rotors feature a silver-gray finish that resists rust better than conventional paint or zinc coatings
- Rotors are dry processed and ready to install
- Non-directional rotor finish supports even pad bed-in and quieter braking
- Rotor castings are machined to OE-level tolerances and inspected for balance and critical dimensions
- Hardware kits use PTFE coating, vulcanized rubber, and stainless steel for corrosion protection
Product Details
Part number 4514-47089 is a DFC brake service kit for Chevrolet K20 and Chevrolet K20 Suburban applications listed above. The DFC Geospec rotor design uses G3000/G11H18 cast iron and a protective coating that helps reduce surface rust during storage and service. The 5000 Advanced pads are formulated for consistent friction, while the included brake hardware is engineered to restore proper spring tension and caliper movement where applicable. This makes 4514-47089 a practical choice for a full front and rear brake service on these classic Chevrolet trucks.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Rust buildup on rotor surfaces
- Uneven braking feel from worn friction materials
- Reduced stopping performance from aged brake components
- Corrosion-related service issues during brake replacement
Installation Notes
Verify axle position and vehicle configuration before ordering. For 1976-1977 Chevrolet K20 and 1977 Chevrolet K20 Suburban, this kit is listed for front and rear service. The rotors are shipped dry and ready to install, which helps reduce prep time during brake work. Inspect calipers, wheel cylinders, and related hydraulic components during service to confirm the rest of the brake system is in good condition.
Quality Assurance
DFC states that each rotor is machined to tight tolerances, inspected for critical dimensions, and checked for balance on vented designs. The rotors include a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched, and the hardware is built with corrosion-resistant materials to support consistent service results.
Description
Brake Kit for Chevrolet K20 and K20 Suburban
The DFC Geospec Rotors with 5000 Advanced Brake Pads kit is built for 1976-1977 Chevrolet K20 and 1977 Chevrolet K20 Suburban front and rear brake service. Part number 4514-47089 combines coated rotors, advanced friction pads, drums, shoes, and hardware components in one service package for a complete brake refresh.
Key Features
- Fits 1976-1977 Chevrolet K20, front and rear
- Fits 1977 Chevrolet K20 Suburban, front and rear
- DFC 5000 Advanced Brake Pads are post-cured for stable friction performance
- Pads are scorched to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- GeoSpec coated rotors feature a silver-gray finish that resists rust better than conventional paint or zinc coatings
- Rotors are dry processed and ready to install
- Non-directional rotor finish supports even pad bed-in and quieter braking
- Rotor castings are machined to OE-level tolerances and inspected for balance and critical dimensions
- Hardware kits use PTFE coating, vulcanized rubber, and stainless steel for corrosion protection
Product Details
Part number 4514-47089 is a DFC brake service kit for Chevrolet K20 and Chevrolet K20 Suburban applications listed above. The DFC Geospec rotor design uses G3000/G11H18 cast iron and a protective coating that helps reduce surface rust during storage and service. The 5000 Advanced pads are formulated for consistent friction, while the included brake hardware is engineered to restore proper spring tension and caliper movement where applicable. This makes 4514-47089 a practical choice for a full front and rear brake service on these classic Chevrolet trucks.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Rust buildup on rotor surfaces
- Uneven braking feel from worn friction materials
- Reduced stopping performance from aged brake components
- Corrosion-related service issues during brake replacement
Installation Notes
Verify axle position and vehicle configuration before ordering. For 1976-1977 Chevrolet K20 and 1977 Chevrolet K20 Suburban, this kit is listed for front and rear service. The rotors are shipped dry and ready to install, which helps reduce prep time during brake work. Inspect calipers, wheel cylinders, and related hydraulic components during service to confirm the rest of the brake system is in good condition.
Quality Assurance
DFC states that each rotor is machined to tight tolerances, inspected for critical dimensions, and checked for balance on vented designs. The rotors include a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched, and the hardware is built with corrosion-resistant materials to support consistent service results.
