Dynamite Friction 4514-47085 Disc Brake Pad and Rotor / Drum Brake Shoe and Drum Kit - Front and Rear
Brake Kit for 1976-1977 Chevrolet and GMC
This DFC brake service kit combines GeoSpec coated rotors, 5000 Advanced brake pads, and matching drum brake components for select 1976-1977 Chevrolet C20, C20 Suburban, G30, P20, and GMC G35 applications. Part number 4514-47085 is built for front and rear brake service on the listed vehicles, including JB6 brake configurations and 11-inch rear drum setups where specified.
Key Features
- DFC GeoSpec coated brake rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced brake pads with post-cured friction material for stable performance
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Drum brake shoes and hardware included for complete service coverage
- Machined to OE-style tolerances with a non-directional rotor finish
- Part number 4514-47085 for front and rear brake repair
DFC Geospec Rotors and 5000 Pads
The DFC Geospec rotor line is machined from G3000/G11H18 cast iron and finished dry, so the rotors are ready for installation without oil removal or extra prep. The non-directional finish supports even pad bedding and smoother braking, while the coated surface helps resist rust on exposed rotor areas. The 5000 Advanced pads are built for consistent friction response and reduced noise, making this kit a practical choice for older Chevrolet and GMC trucks and vans that need a complete brake refresh. Part number 4514-47085 is a direct-fit service solution for these applications.
What This Kit Helps Address
- Brake pulsation from worn or uneven rotors
- Noise caused by aged pads, shoes, or hardware
- Corrosion on rotor surfaces and brake components
- Reduced braking response from fatigued friction material
- Uneven rear drum wear on service-worn brake systems
Installation Notes and Fitment
Fits 1976-1977 Chevrolet C20, front and rear, 11 inch rear drums, JB6 brakes.
Fits 1976-1977 Chevrolet C20 Suburban, front and rear, 11 inch rear drums, JB6 brakes, under 7,500 lb GVW.
Fits 1976-1977 Chevrolet G30, front and rear, single rear wheels.
Fits 1976-1977 Chevrolet P20, front and rear, JB6 brakes.
Fits 1976-1977 GMC G35, front and rear, single rear wheels.
Verify brake configuration, rear drum size, and GVW before installation. Clean all mating surfaces, inspect calipers, wheel cylinders, and related brake components, and follow proper bedding procedures after installation. Part number 4514-47085 is intended for the listed front and rear service applications only.
Quality Assurance
DFC manufactures the pads, rotors, and hardware components to OE-style specifications with 100% inspection of critical rotor attributes and balance checks on vented rotors. The rotors carry a 12-month warranty against defects in material and workmanship.
Brake Kit for 1976-1977 Chevrolet and GMC
This DFC brake service kit combines GeoSpec coated rotors, 5000 Advanced brake pads, and matching drum brake components for select 1976-1977 Chevrolet C20, C20 Suburban, G30, P20, and GMC G35 applications. Part number 4514-47085 is built for front and rear brake service on the listed vehicles, including JB6 brake configurations and 11-inch rear drum setups where specified.
Key Features
- DFC GeoSpec coated brake rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced brake pads with post-cured friction material for stable performance
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Drum brake shoes and hardware included for complete service coverage
- Machined to OE-style tolerances with a non-directional rotor finish
- Part number 4514-47085 for front and rear brake repair
DFC Geospec Rotors and 5000 Pads
The DFC Geospec rotor line is machined from G3000/G11H18 cast iron and finished dry, so the rotors are ready for installation without oil removal or extra prep. The non-directional finish supports even pad bedding and smoother braking, while the coated surface helps resist rust on exposed rotor areas. The 5000 Advanced pads are built for consistent friction response and reduced noise, making this kit a practical choice for older Chevrolet and GMC trucks and vans that need a complete brake refresh. Part number 4514-47085 is a direct-fit service solution for these applications.
What This Kit Helps Address
- Brake pulsation from worn or uneven rotors
- Noise caused by aged pads, shoes, or hardware
- Corrosion on rotor surfaces and brake components
- Reduced braking response from fatigued friction material
- Uneven rear drum wear on service-worn brake systems
Installation Notes and Fitment
Fits 1976-1977 Chevrolet C20, front and rear, 11 inch rear drums, JB6 brakes.
Fits 1976-1977 Chevrolet C20 Suburban, front and rear, 11 inch rear drums, JB6 brakes, under 7,500 lb GVW.
Fits 1976-1977 Chevrolet G30, front and rear, single rear wheels.
Fits 1976-1977 Chevrolet P20, front and rear, JB6 brakes.
Fits 1976-1977 GMC G35, front and rear, single rear wheels.
Verify brake configuration, rear drum size, and GVW before installation. Clean all mating surfaces, inspect calipers, wheel cylinders, and related brake components, and follow proper bedding procedures after installation. Part number 4514-47085 is intended for the listed front and rear service applications only.
Quality Assurance
DFC manufactures the pads, rotors, and hardware components to OE-style specifications with 100% inspection of critical rotor attributes and balance checks on vented rotors. The rotors carry a 12-month warranty against defects in material and workmanship.
Description
Brake Kit for 1976-1977 Chevrolet and GMC
This DFC brake service kit combines GeoSpec coated rotors, 5000 Advanced brake pads, and matching drum brake components for select 1976-1977 Chevrolet C20, C20 Suburban, G30, P20, and GMC G35 applications. Part number 4514-47085 is built for front and rear brake service on the listed vehicles, including JB6 brake configurations and 11-inch rear drum setups where specified.
Key Features
- DFC GeoSpec coated brake rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced brake pads with post-cured friction material for stable performance
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Drum brake shoes and hardware included for complete service coverage
- Machined to OE-style tolerances with a non-directional rotor finish
- Part number 4514-47085 for front and rear brake repair
DFC Geospec Rotors and 5000 Pads
The DFC Geospec rotor line is machined from G3000/G11H18 cast iron and finished dry, so the rotors are ready for installation without oil removal or extra prep. The non-directional finish supports even pad bedding and smoother braking, while the coated surface helps resist rust on exposed rotor areas. The 5000 Advanced pads are built for consistent friction response and reduced noise, making this kit a practical choice for older Chevrolet and GMC trucks and vans that need a complete brake refresh. Part number 4514-47085 is a direct-fit service solution for these applications.
What This Kit Helps Address
- Brake pulsation from worn or uneven rotors
- Noise caused by aged pads, shoes, or hardware
- Corrosion on rotor surfaces and brake components
- Reduced braking response from fatigued friction material
- Uneven rear drum wear on service-worn brake systems
Installation Notes and Fitment
Fits 1976-1977 Chevrolet C20, front and rear, 11 inch rear drums, JB6 brakes.
Fits 1976-1977 Chevrolet C20 Suburban, front and rear, 11 inch rear drums, JB6 brakes, under 7,500 lb GVW.
Fits 1976-1977 Chevrolet G30, front and rear, single rear wheels.
Fits 1976-1977 Chevrolet P20, front and rear, JB6 brakes.
Fits 1976-1977 GMC G35, front and rear, single rear wheels.
Verify brake configuration, rear drum size, and GVW before installation. Clean all mating surfaces, inspect calipers, wheel cylinders, and related brake components, and follow proper bedding procedures after installation. Part number 4514-47085 is intended for the listed front and rear service applications only.
Quality Assurance
DFC manufactures the pads, rotors, and hardware components to OE-style specifications with 100% inspection of critical rotor attributes and balance checks on vented rotors. The rotors carry a 12-month warranty against defects in material and workmanship.
