Dynamite Friction 4514-47083 Disc Brake Pad and Rotor / Drum Brake Shoe and Drum Kit - Front and Rear
Brake Service Kit for OE-Style Stopping
The Dynamite Friction DFC Geospec Rotors with 5000 Advanced Brake Pads kit combines coated brake rotors, advanced friction pads, and brake hardware components in one service package. Part number 4514-47083 is built for drivers who want a complete brake refresh with OE-style fit, stable pedal response, and reduced brake noise.
Key Features
- DFC 5000 Advanced Brake Pads with post-cured friction material for consistent performance
- Scorched pad surface to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- DFC GeoSpec coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed, dry-shipped rotors ready for installation without extra cleaning
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Hardware kit engineered with PTFE coating, vulcanized rubber, and stainless steel
Product Line Details
The DFC Geospec Rotors with 5000 Advanced Brake Pads line is designed as a matched brake service solution. The rotor coating helps resist rust better than conventional painted or zinc-coated surfaces, while the pad formulation is developed from DFC’s friction research for axle-specific braking requirements across a range of passenger vehicles and light trucks. Part number 4514-47083 brings those components together for a more complete brake service.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Rust buildup on exposed rotor surfaces
- Longer stopping distances from worn friction material
- Poor pedal feel after a brake service
Installation Notes
Compatible With service applications that require a disc brake pad and rotor / drum brake shoe and drum kit. Inspect calipers, slides, and mounting points before installation, and replace any worn components that could affect pad movement or rotor contact. Clean all mating surfaces and follow the vehicle manufacturer’s torque and bedding procedures for the specific brake system.
Quality Assurance
DFC pads are post-cured and scorched for stable friction performance, and the rotors are machined to tight tolerances with a non-directional finish and 100% inspection of critical dimensions. Vented rotors are balance-checked and corrected when needed. DFC GeoSpec rotors include a 12-month warranty against defects in material and workmanship.
Compatible With brake service on select vehicles such as Honda Civic and Toyota Corolla applications where this kit is specified. Part number 4514-47083 is intended for buyers searching for a complete brake kit with coated rotors, advanced pads, and hardware components.
Brake Service Kit for OE-Style Stopping
The Dynamite Friction DFC Geospec Rotors with 5000 Advanced Brake Pads kit combines coated brake rotors, advanced friction pads, and brake hardware components in one service package. Part number 4514-47083 is built for drivers who want a complete brake refresh with OE-style fit, stable pedal response, and reduced brake noise.
Key Features
- DFC 5000 Advanced Brake Pads with post-cured friction material for consistent performance
- Scorched pad surface to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- DFC GeoSpec coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed, dry-shipped rotors ready for installation without extra cleaning
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Hardware kit engineered with PTFE coating, vulcanized rubber, and stainless steel
Product Line Details
The DFC Geospec Rotors with 5000 Advanced Brake Pads line is designed as a matched brake service solution. The rotor coating helps resist rust better than conventional painted or zinc-coated surfaces, while the pad formulation is developed from DFC’s friction research for axle-specific braking requirements across a range of passenger vehicles and light trucks. Part number 4514-47083 brings those components together for a more complete brake service.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Rust buildup on exposed rotor surfaces
- Longer stopping distances from worn friction material
- Poor pedal feel after a brake service
Installation Notes
Compatible With service applications that require a disc brake pad and rotor / drum brake shoe and drum kit. Inspect calipers, slides, and mounting points before installation, and replace any worn components that could affect pad movement or rotor contact. Clean all mating surfaces and follow the vehicle manufacturer’s torque and bedding procedures for the specific brake system.
Quality Assurance
DFC pads are post-cured and scorched for stable friction performance, and the rotors are machined to tight tolerances with a non-directional finish and 100% inspection of critical dimensions. Vented rotors are balance-checked and corrected when needed. DFC GeoSpec rotors include a 12-month warranty against defects in material and workmanship.
Compatible With brake service on select vehicles such as Honda Civic and Toyota Corolla applications where this kit is specified. Part number 4514-47083 is intended for buyers searching for a complete brake kit with coated rotors, advanced pads, and hardware components.
Description
Brake Service Kit for OE-Style Stopping
The Dynamite Friction DFC Geospec Rotors with 5000 Advanced Brake Pads kit combines coated brake rotors, advanced friction pads, and brake hardware components in one service package. Part number 4514-47083 is built for drivers who want a complete brake refresh with OE-style fit, stable pedal response, and reduced brake noise.
Key Features
- DFC 5000 Advanced Brake Pads with post-cured friction material for consistent performance
- Scorched pad surface to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- DFC GeoSpec coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed, dry-shipped rotors ready for installation without extra cleaning
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Hardware kit engineered with PTFE coating, vulcanized rubber, and stainless steel
Product Line Details
The DFC Geospec Rotors with 5000 Advanced Brake Pads line is designed as a matched brake service solution. The rotor coating helps resist rust better than conventional painted or zinc-coated surfaces, while the pad formulation is developed from DFC’s friction research for axle-specific braking requirements across a range of passenger vehicles and light trucks. Part number 4514-47083 brings those components together for a more complete brake service.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Rust buildup on exposed rotor surfaces
- Longer stopping distances from worn friction material
- Poor pedal feel after a brake service
Installation Notes
Compatible With service applications that require a disc brake pad and rotor / drum brake shoe and drum kit. Inspect calipers, slides, and mounting points before installation, and replace any worn components that could affect pad movement or rotor contact. Clean all mating surfaces and follow the vehicle manufacturer’s torque and bedding procedures for the specific brake system.
Quality Assurance
DFC pads are post-cured and scorched for stable friction performance, and the rotors are machined to tight tolerances with a non-directional finish and 100% inspection of critical dimensions. Vented rotors are balance-checked and corrected when needed. DFC GeoSpec rotors include a 12-month warranty against defects in material and workmanship.
Compatible With brake service on select vehicles such as Honda Civic and Toyota Corolla applications where this kit is specified. Part number 4514-47083 is intended for buyers searching for a complete brake kit with coated rotors, advanced pads, and hardware components.
